- Видео 43
- Просмотров 10 660
Tanner Jones
Добавлен 30 сен 2014
Just a dude with too many cars and the drive to share the adventure with an audience
The Engine Build Begins! Abandoned Mitsubishi Evolution 9 MR Rebuild Part 7
We finally got all of the engine bits back from Madcap! This is the first part of the build for it, aiming to get the full assembly video out next week if all goes well tomorrow.
Просмотров: 247
Видео
Headlight Restoration and Machine Shop Problems Abandoned Mitsubishi Evolution 9 MR Rebuild Part 6
Просмотров 21814 дней назад
Going over all of the issues I have been having with getting my engine machine work done and making my headlights look great again.
BRAND NEW Braum Elite V2 seats Abandoned Mitsubishi Evolution 9 MR Rebuild Part 5
Просмотров 21221 день назад
Brand new Braum Elite V2 seats for the Evo! This video goes over the install and my overall thoughts on them. Also going over cleaning out and fixing up my fuel system.
Powder Coating The Perfect Valve Cover Abandoned Mitsubishi Evolution 9 MR Rebuild Part 4
Просмотров 194Месяц назад
The crusty valve cover is finally powder coated using a 4 stage process! It took an entire afternoon but as you can see it was 100% worth it. Engine is now at a new machine shop as of 9/5. I may make a video on what happened but I'm not sure yet.
Fixing My Evo IX Front Bumper
Просмотров 85Месяц назад
Fixing all of the damaged mesh on my front bumper and making it look perfect. Still have a couple stupid things to get for it, but overall it looks great!
Fixing my 1948 Ford F1 Pickup
Просмотров 246Месяц назад
Formally introducing my 1948 Ford F1 Pickup finally. I've had this truck for a couple years and this video explains how I got it and where it sits now. Also a minor update on the Evo 9
This is bad.... Abandoned Mitsubishi Evolution 9 MR Rebuild Part 2
Просмотров 1,3 тыс.Месяц назад
This is bad.... Abandoned Mitsubishi Evolution 9 MR Rebuild Part 2
Abandoned Mitsubishi Evolution 9 MR Rebuild Part 1
Просмотров 5322 месяца назад
I finally got one! Introducing my Evolution 9 MR I bought off my friend after I sold all of my Speeds and another car. Follow along to see this car come back to life after 5 years of sitting
2007 Mazdaspeed3 HKS Exhaust Install and Test Drive
Просмотров 1182 месяца назад
Brand new HKS exhaust is a bit quieter than you would think. This is the final video for this Mazdaspeed3 because I managed to buy a dream car of mine. Video goes live next week!
The BEST Headlight Restoration Kit You Can Buy
Просмотров 4012 месяца назад
Huge shoutout to Cerakote for making a killer product. These headlights will look great for years to come!
2007 Mazdaspeed3 2.5 First Start and Troubleshooting
Просмотров 432 месяца назад
She runs! Runs great and drives great with no real issues. Headlight restoration video and exhaust video inbound. New project after the release of those two videos
2007 Mazdaspeed3 2.5 Engine Install
Просмотров 632 месяца назад
Finally getting the engine in the Marketplace Speed3. Next video is first start after fighting all of the challenges in the last couple videos
2007 Mazdaspeed3 2.5 Assembly Part 2
Просмотров 493 месяца назад
The final assembly video before the engine gets dropped in
2007 Mazdaspeed3 2.5 Assembly Part 1
Просмотров 413 месяца назад
First part of the engine assembly. New projects on the way
Cheapest 2007 Mazdaspeed3 on Marketplace Rebuild Part 2- Engine Teardown....RIP Cylinder 3
Просмотров 645 месяцев назад
So I accidentally deleted the engine removal so this is now part 2. More to come soon. Car is running as of now and I have lots of content being edited now.
Cheapest 2007 Mazdaspeed3 on Marketplace Rebuild part 1
Просмотров 1196 месяцев назад
Cheapest 2007 Mazdaspeed3 on Marketplace Rebuild part 1
First Gen Tacoma Magnuson TVS 1320 Install
Просмотров 6 тыс.7 месяцев назад
First Gen Tacoma Magnuson TVS 1320 Install
Escape From Tarkov- Revenge for Eric
Просмотров 148 месяцев назад
Escape From Tarkov- Revenge for Eric
Fabricating a "Skid Scoop" for the 2JZ Swapped Tacoma
Просмотров 378 месяцев назад
Fabricating a "Skid Scoop" for the 2JZ Swapped Tacoma
Do-Luck Ebay Front Lip for the Evo 8!
Просмотров 2314 года назад
Do-Luck Ebay Front Lip for the Evo 8!
Great work, mate. Thank you for sharing.
@@SavioSteves thank you for watching!
@@SavioSteves thank you for watching!
I’m gonna try that head light kit👌🏽
@@Kj4real do it! They are well worth the money
Do you need to do anything with the computer since you are adding boost ?
@@DominicRowe-e5s with the moderate levels this produces combined with that fuel management unit it controls all of that and the ECU can basically just run as usual. Extra boost would require the 7th injector and tuning
this looks terrifying haha. Looking forward to the build
@@prjctgarage4457 it was pretty rough! Build starts in tomorrow's video!
Thanks for the feedback! Leaning towards these for my E63 AMG
@@OGYELLOW they are pretty solid!
So cool!!! What are the quantities you bought and how do you figure out what part would need how much powder
@@truestreetbuildz9690 roughly I order one pound of each which is the minimum from Prismatic. For clear since I use it a lot I order 2 usually, but a little powder goes a long way with a good quality gun for sure! Doing all of this I barely put a dent in any of the bags
I want to actually raise my seats and angle them too but have stock seats lol
@@carlosfalcon7728 I'm really curious how the stock seats are height and angle wise versus these Braums, I'm hoping I can find someone local at some point to compare them with
@@tannerjones762 I am 5'10 and sit uncomfortable in the car. Also the pedals are also off, i feel like the brake pedal is way closer
@@carlosfalcon7728 wild! I definitely want to hop in a stock set and compare, that and do my custom brackets for these seats once the engines back
@@tannerjones762 keep up the great work!
@@carlosfalcon7728 thank you! I appreciate you watching!
I've never seen DIY powder coating. That was very informative and ended in a great result. Could you advise what it cost in powders and the machine please? Thanks
@@dillpickle7468 thank you! Powders vary a lot. I get all of mine from Prismatic Powders so you can look there for a lot of costs. Also one pound will go a long way when you go to order some as long as you have a good setup. This powder coating gun is about $350 but we'll worth it. Harbor Freight has one for like $70 but it's not good. I could not get it to stick without a hot flock and it DUMPS powder out of the front
@@tannerjones762 thanks for the reply
Been thinking about starting my own evo projects and these videos came in right on time thank you!
@@gueroangeles7511 definitely do it! I love this car and I haven't even driven it since my friend bought it in 2017 lol. It's a fun project no matter what though
i recently just picked up another Evo 8 myself looking frw to seeing you get it back on the road man.
@@aaronElmore-p6h I appreciate it! And congrats on the 8! Is it a driver or more of a project?
just do a balance shaft delete it it dose not add much more vibration and you would not have to worry about it failing again .
@@aaronElmore-p6h that's the plan, I'm actually working on getting it all put together last night but ran into not having a socket for the castle nut and of course it's being stubborn
What is the part number for the intake gasket? Also tried to find the longer bolt I think you said "bolt 37439-d" from ace, is that correct? Thank you!
@@Cstrub28 for the intake manifold or the throttle body?
@@tannerjones762 Intake I belive
@@Cstrub28 www.amazon.com/dp/B00GKGXYOM?ref=ppx_yo2ov_dt_b_fed_asin_title This is the exact one I got, OEM and cheaper than felpro. Same gasket for the upper and lower plenums if you are not supercharging
@@tannerjones762 You're the man - thank you!, Second question having a hard time sourcing the longer carriage bolt you showed, Where did you find that exactly?
@@Cstrub28 the one for the tensioner? Take the one that comes with it, check threads, go to ace and snag one that's like a half inch longer and you're golden! Try and match hardness ratings if you can too
Sucks that you had to pay 18k for this car, but looking forward for more awesome videos. NOTE: lower a little bit more the background music to hear you better
@@carlosfalcon7728 it is what it is, looking back on it knowing what I know now o think I still would have bought it. It has given me a top of experience and a fresh start on the engine, but most important I got some good content out of it lol. I'll adjust the background music a bit, thank you for the comment!
Looking forward to see this restoration!
Congrats on getting your dream car! Looking forward to seeing the progress! 🫡
@@CJ2X hey I appreciate it! I hope it can shape up to being as clean as yours is!
another great video!
Hi, make sure to block the oil bearing hole (of the balance shaft bearing) by rotating the bearing. If you delete them. Else your oil pressure will be very low....
@@NicolaasPlatenkamp that's the plan! I have the GSC race shaft ready to go into it whenever I get the block back that came with the block off bearings. Just a matter of the machine shop deciding to get the block done
I love HKS exhaust for gen1 u need a full 3” downpipe get better flow
@@lanceruka8373 that was next on the list for the car before I sold it for my Evo 9! I had it sitting under a work bench just waiting to get installed
Thanks for the input. I ordered that kit for my 2003 Tacoma based on this video. I won't be installing a $4000 turbo though🙂.
@@stevet8121 good deal! My Tacoma desperately needs attention once I'm done with my current project. Starting with the headlight restoration lol
What’s the part number for the aem fuel pump?
I'm pretty sure it was this one, but I'm not positive www.maperformance.com/products/aem-high-flow-in-tank-fuel-pump-340lph-50-1000?_pos=1&_psq=aem+fuel+pump&_ss=e&_v=1.0
Good video yet the music was a bit too loud couldn’t hear your that well
@@jonathantorok1673 you know I'm questioning if I dropped the volume on the music in editing or not lol
What is the part number for the Vortech fuel management unit?
@@jeremyduncan8030 I got you! VOR-6Z110-125
What year is your tacoma ? How much did your gasoline consumption increase ?
1998 Tacoma. I did not drive it enough with the super to know what the fuel economy looked like, but I did notice I get bad MPGs with 91 in general
Great detail of your install but why no test drive with the supercharge😢
I actually did drive it home and back to the shop the following day, I loaned out my gopro and have yet to get it back. I also have a video on my coilovers ready to go once I can get it back and get some driving footage to add in. Also with the supercharger I didn't really have it on long enough for the ECU to learn so it would have been a pretty underwhelming result. More so than I already felt that it was
Didn’t want to try it with the 7th injector before sale?
Decided to sell it and not mess with it for 2 reasons. The first being seafoaming the engine seemed to net better gains than the bump the supercharger gave with this setup because the engine was very dirty. It made it more barnacle to drive. The second reason is if I sold it for about what I paid I could use the money to buy another project and make content with it which I did. So I have like 3 or 4 videos already in the pipeline where as the 1320 was pretty much a one and done sort of setup content wise
Did the supercharger cause reliability issues on your truck? I was thinking about SC my 4Runner with the same supporting mods from SNP
@@linardreyes6043 From what I know from others experiences there would be no reliability issues at all as long as your motor isn't on the way out. For me though, I did not see the benefit versus cost as being worth while. After I sold the super I bought the Speed3 I have been making videos on and the next move over the next few months is to source an LS and all supporting swap parts for the Tacoma. All in it should cost half of what the 1320 ran me without the SNP addition.
Neat idea. Can you post more vids with the sweet sounds of a 2jz coming from a Tacoma?
I only have one that I have on my tiktok, but I am more than happy to post it here!
My M3 said he had a kissable face 🤷🏻♂️
Your M3 got bashful for a second before committing to the bit
I didn't know the pkm was that good🔥