Видео

Gday mate. Does the transmission need to be supported at all during the driveshaft removal or can the shaft be completely removed without touching the trans? Cheers

What's easiest way get back in manual vy SS pushed front allway in put bracket on centre bearing no room for rear doughnut to bolt back onto diff,surely there's a trick ,front 1st all way

If by chance you have serious issues cause nothing works cut the bearing carrier remove the Centre bearing race you will now have enough room to fit a plate and used a good bearing puller screw holes fit bolts and press the two shafts apart

Thanks for sharing

Merry Christmas and Happy New Year Brother....reno coming along slowly but great, keep working and Dad would be proud of your tv unit construction. Well done xx

Nice progress on the house Andy👍 Merry Christmas and a Happy 2025!

Great progress on the Reno's and you got away for a well earned break 👍 Merry Xmas and Happy and Prosperous new to come 🍻

Did the sharp edges on the sheet metal shift lever wear out the white boot (bolts to tunnel) with sharp corners?

Is this or the bigger fan better?

Wanna cone and do mine mate?

Wow what a job. You are a very patient man well done

Just wondering have vx commodore wagon is it easy to change the brake pads also do you need to bleed the back brakes

Great video matee, it certainly was a dream come true week at the fantastic show of our beloved Monaros 😍👌🚗👍 That home cinema room will be THE location for boys nights watching our fav video clips and movies 🍻👍

Bought mine and it died 12 1/2 months later. Probably used it 10 hours absolute max. Just doesn't switch on now. Sydney tools wanted me to send a video as proof that it doesn't switch on. I told them that would be pointless but they said it's policy. As it was also a few weeks out of warranty they said to ship it back east as I bought it online and they'll have a look at it and they may or may not fix it. So I told them to get stuffed. I still have it here a few years later. Obviously something simple is there is power going to the unit...

Does anyone know the internal dimensions of the big drawers? Long shot! 😂

VY clubby. My cover is hooked in with wires What's that about if you know? Thanks

Hey jus wanna ask was it hard to put a t5 gearbox in your vz or did it come with it already?

Hi @graybildz, at time 6:19, you said the center bearing is worn out and will cause the drive shaft to bounce around at low speeds, does this mean that when you press the brake, it will cause it to make a rattling noise of some sort?

Can see you are doing some great work renovating. and I love to see these videos Brother

It’s coming along nicely Andy!👍

I think driving up a gravel driveway is one of many pleasurable and welcoming parts of a home where it can be done.

The slab where the door is, does that have a slight drop to the front so water runs off the front and away over the edge?

Wow, that looks gr8 mate. Don't you love the smell of concrete setting? 😍👌 Driveway work is excellent, can't wait to see it in person 🍻

when you shake it is there a clang ringing sound from the drawer locking mechanism? mine has this sound

Another big project, Andy. That will be a nice addition!👍

Wow that house certainly gives more and more everyday 😯 Good to see an update, I need to check it out soon in person. Maybe a stay over and Bathurst day TV watching soon. Cheers mate 🍻🍻

I’m looking into making an office chair with a vt commodore chair do you think this would be possible with how the chair is underneath? My idea was to mount it to a base on the office chair do you think its possibpe

I couldn't work out how the plastic headrest guides came out and or the lumber support came off , your video helped me out , cheers bloke

با تمام وجودم دوست دارم ژاکلین❤❤❤❤❤❤❤

دوست دارم ژاکلین❤❤❤❤

Excellent video mate, definitely came in handy when doing my own SS seats. Cheers!

In desperation I took it apart. It seems the mechanism is the same for Active Lock and OFF Lock. The Mechanism is not smart to position the pendulum in its zero postion but shove it as far as it can go to one side. Its a shocking design and totally useless active Lock feature. No wonder DETROIT Cross Line Lasers cannot be found these days as a new item. Prob gone bust. Glad I only paid $25 AUD for it on ebay back in 2018.

Mine has 2 lock positions. one for OFF and transport. The other leaves the laser ON. I cant find DETROIT Cross Line Lasers now on the internet or any user manual.

I just purchased a Detroit Cross Line Laser. My main gripe is once leveled and lock switch moved to lock it pushes to laser off its calibrated mark. Is this normal? I wanted to project a line perpendicular to a 45 Deg Plate.. Secondly the Mode button does not seem to do anything except light the led by the button. Any ideas?

Beer has IPA instead of XPA Brother xxx

Good ome mate 👍

Recommend demonstrating product in action to illustrate if it's "any good" vs just talking about it..

Good review! nice size but the noise has put me off

Hey mate, bit of an odd question. But I have the same trolley that I had built in to a set of cabinets and I’m moving house so I want to put the wheels on but I’ve lost the bolts and instructions haha. Do you happen to know the bolt size? Tried a m10 bolt I had but it doesn’t seem to like it. Thanks

Thanks for your video .., gave me some guidelines I didn’t do it exactly like you I did it out of a vice … someone had done it before on this car .. I’m doing amd my guess was it failed non-genuine … I would if anyone does this get the genuine centre bearing as it’s an integral part I paid close to $70 for genuine there are cheap ones for about $30 … however bring a driveshaft don’t muck around… I will add as well … this car I’m working on came up with powertrain warning .. RAA roadside came along mis -diagnosed this as coil pack .. I tested coil packs as they were not that old … powertrain warning also is to do with unbalanced driveshafts … can be transmission .. so I took car for test drive clunk clunk clunk then drove it further put my foot down at a higher speed clunk clunk clunk .. powertrain warning at the same time … don’t be misled by people on youtube saying powertrain is coil packs

Were you in Wagga at STT?

Glad you get to spend a few weeks in the warmth of Darwin. Our thoughts are with Tracy and hope she makes it through the big chill. Maybe you can shout her a long weekend in Darwin? Mindle beach markets, Mary's laksa, catch a meter barra, definitely major points to be had there, thank me later

I found that a very Malty beer for an IPA, which I like a lot and it's local 😍🍻. Oooh! I'll have to get one of those for the tool collection Cheers mate 👍🍻

nice job, black looks good on the Monaro. I was sooooo disappointed we never got a Monaro on the "VE" platform, would of looked sex with the pumped guards.... similar to the A9X. What could of been hey...

Thats exactly how i started. The following steps are. Your Doublegarage is too small for all you Tools/Maschines/Restmaterials. Then i needed to build a shed with the size of my double Garage to move the stuff. To get room/space again to do Work Project. Your jobs will get bigger and the Doublegarage wont have enough space for the heavy Maschiny. So you need to build a Workshop. Thats what i m now doing. Since 5,5 years. It took so long because i dug and dig out a basement under the Workshop for storage and utilites. The work never stops, the projects get bigger and bigger. The numbers you dealing with get bigger and bigger. Last Month i bought Concrete for about 9k€. Or spend 16k on a CNC. There are a lot of Tools i only used once. But better to have and no need. Then needed and not have.

Do you have to get it rebalanced?

what if the bottom shock part does not want to come out? I removed the bolts (top/bottom) but the shock from the bottom doesn't want to come out - its like they are sealed together somehow!!! do you have any suggestions?

Love the logic Andy, will get the missus to watch this👍. Oh wait, I am still working 😔

I like your logic, Andy!👍

Wait what? You say that you have no money when I suggest a new tool? Oh its all already invested in TOOLS! mmmmmm tools. I like this! Its a new direction, almost 🤣🤣🍻🍻