- Видео 74
- Просмотров 204 558
Alaska Energy Authority
США
Добавлен 30 окт 2017
AEA is a public corporation of the State of Alaska governed by a board of directors with the mission to “reduce the cost of energy in Alaska.” AEA is the state's energy office and lead agency for statewide energy policy and program development.
Whether building modern and code-compliant bulk fuel tank farms, upgrading to high-efficiency generators in rural powerhouse systems or integrating renewable energy projects, AEA emphasizes community-based project management. AEA’s core programs work to diversify Alaska’s energy portfolio, lead energy planning and policy, invest in Alaska’s energy infrastructure and provide rural Alaska with technical and community assistance.
AEA also manages the Renewable Energy Fund, the Emerging Energy Technology Fund, the Power Cost Equalization Program and various Energy Efficiency and Conservation Programs. AEA provides grants and loans for qualified energy infrastructure projects and also owns energy infrastructure for the benefit of Alaskans.
Whether building modern and code-compliant bulk fuel tank farms, upgrading to high-efficiency generators in rural powerhouse systems or integrating renewable energy projects, AEA emphasizes community-based project management. AEA’s core programs work to diversify Alaska’s energy portfolio, lead energy planning and policy, invest in Alaska’s energy infrastructure and provide rural Alaska with technical and community assistance.
AEA also manages the Renewable Energy Fund, the Emerging Energy Technology Fund, the Power Cost Equalization Program and various Energy Efficiency and Conservation Programs. AEA provides grants and loans for qualified energy infrastructure projects and also owns energy infrastructure for the benefit of Alaskans.
Power Plant Power Meter Shark200
How to view basic information on the Shark200 Electronic Power Meter (EPM)
Просмотров: 875
Видео
AEA Rural 3D Imaging
Просмотров 1944 года назад
3D Imaging of Newhalen Powerplant and Scammon Bay Tank Farm
What is AVTEC and the PPO Class
Просмотров 8064 года назад
Description: Jerry Blitz, the Power Plant Operations class instructor, introduces himself and gives a brief overview on what Power Plant Operations 1 and 2 classes go over as well as the Advanced Power Plant class. An excellent video for the utility manager and operator to view to see if these classes fit their needs. Power Plant Operations 1 class is 4 weeks long. Power Plant Operations 2 clas...
Power Plant Walk Through
Просмотров 13 тыс.4 года назад
Description: Jerry Blitz of AVTEC gives a narrated walk through of the power plant. This is a great video for the utility manager to understand what the various components of the plant are. Summary: Come join Jerry as he walks the viewer through the control room and the generator room of the power plant. In the control room Jerry goes through the various components and their functions in the sw...
Power Plant Oil Change
Просмотров 5914 года назад
Description: This video reviews the procedure of changing the oil and filter on the genset in the power plant. Summary: The oil and filter should be changed at 300 hour intervals. Ideally an operator will wait for the “service engine alarm” to transfer the load to another genset and shut the current one down. After the genset is shutdown it needs to be locked out. Next the operator will open th...
Water Pump Replacement
Просмотров 5117 лет назад
Description: This video provides operators with steps to properly replace a water pump. Summary: To begin the procedure, isolate the cooling system and then close the coolant valves. Once this is done, loosen all pulley bolts and remove the accessory belt. Following completion of the remaining steps indicated; make any required replacements to complete the replacement of a water pump.
Power Plant Ventilation System
Просмотров 9147 лет назад
Description: This video provides a detailed overview of the ventilation located in power plants. Summary: The ventilation system located in the power plant consists of intake and exhaust. All building walls within the power plant are equipped with motorized dampers, which are necessary for the fire suppression system to be effective. Fresh air enters the building through the two intake ducts.
Engine Valve Adjust
Просмотров 3777 лет назад
Description: This video explains the proper way to adjust an engine valve while making sure the unit is locked out. Summary: To begin valve adjustment, adjust injector preload. To perform the procedure, the flywheel turning tool will be necessary.
Turbocharger Replacement
Просмотров 2537 лет назад
Description: This video explains the procedure to test if your turbocharger operates properly and if it does not, how to fix it. Summary: Before beginning repair work, lock unit out. To replace the turbocharger, you must remove the intake bellows, the exhaust pipe, the turbo from the exhaust manifold and the intake manifold. The procedure is relatively simple, one just has to be cognizant of an...
Thermostat Replacement
Просмотров 4897 лет назад
Description: This video shows how to replace a cooling system thermostat. Summary: Before repair work begins, make sure to lock engine out because gensets start automatically. To begin, remove the upper radiator and coolant bypass hoses, as well as the over temperature switch. The cooling system must be isolated in order to perform replacement procedure of thermostat.
Starter Motor Test
Просмотров 6557 лет назад
Description: This video shows how to trouble shoot the starter on the engine. Summary: Operator should check starter motor when there are issues with slow cranking or no cranking. After checking batteries and other connections, be sure the engine will NOT start during procedure. To do so, operator must remove wire to fuel shutoff. To make sure engine does not work, operator could also trip the ...
Switchgear Engine Service
Просмотров 2587 лет назад
Description: This video gives the operator instructions on what to do on the switchgear side of things when it is time to change the oil of the engine. Summary: After 250 hours on a unit, or when an operator sees that there is a service warning alarm on their panel, the operator must perform an oil change on the engine to put it back into service. On panel, operator should select ‘manual’ mode....
Switchgear Overview
Просмотров 7 тыс.7 лет назад
Description: This video gives the operator a thorough overview of the switchgear and each of its different functions
Switchgear Master Section Faults
Просмотров 2467 лет назад
Description: This video reviews faults of the master section and the procedure the operator must follow to clear them in order to get plant running. Summary: When an operator receives an indicator fault in the master section, the entire system will shut down. To clear the fault in the engines, the operator should pull the emergency switch out. Push reset button on master section. Fault indicato...
Switchgear Manual Mode
Просмотров 2847 лет назад
Description: This video shows how to operate the switchgear in manual mode. Manual mode is only to be used in certain situations such a PLC failure. Summary: In the event of failure, operator should choose the biggest engine to come online in order to pick up loads of community. On largest generator, select the manual start button.
Great stuff here. We'll explained. Thank you
I would recommend for most people not to tighten filter with a wrench. Cause it may cause it to be way too tight for the next tech to get it off. And that’s what the gasket is for. Get it snug, then by hand give it a little extra.
hi zikry buat test ka
Interesting tour ! The US finances a genocide in Palestine. Children are being amputated and dismembered by the thousands
You should attend safety training programs for British petroleum
Pls fir the driver let him wear safety belts
Wheres is your gloves...
is this just a teaching tool? why are none of them running?
It is a teaching tool and that is why none of them are running. It would be impossible to hear Jerry talk over the engines in the engine room.
How old is this video? Im guessing the 1980s?
I'm working on a Mi-T-M generator, brushless with no voltage regulator. To test these diodes, I'll have to de-solder them. This actually helped, thanks a lot.
Thank you for sharing all these videos about tank farms!
This is operator's rounds not maintenance inspection right?
Correct
AS USUAL EXCELLENT THANKYOU
Very nice please make some video about load shedding
Do the generators need exciter current?
yes
Do you have the list in pdf format?
I'm sorry we do not. The list/logs should be in the O&M paperwork for the facility.
Exellent
Thanks for the info!
What is the output voltage on these generators ? And frequency
I really delighted these technologies can we have on job training or courses?
Do one on how to fill a tanker trailer that doesn't have a level guage and has to be in vacuum (so u can't keep the lid open to watch the level).
I'm sorry I do not.
Thanks Sir.
Thank you sir.
that's a very good and detailed presentation, thumbs up to you..
Top loading with a nozzle and no fall protection you should both be fired
Grounded with an alligator clamp very unsafe especially with 1203 decals
Excellent. So much is automated. Miss the sync meters. When we did it the building was dark. First generator brought power to the plant.
Why is the tank called 'day' tank ?
Theoretically it contains the fuel needed for the days power needs. But the tank automatically fills when it gets to about half full.
@@alaskaenergyauthority7923 Thanks Brother
Very well done. Not the info I need, but I watched the whole thing anyway. Thanks for sharing.
Told us everything but the MW output...!! Lol No seriously, how many KW is this operation...???
I believe that total plant capacity is 280kW
@@alaskaenergyauthority7923 Thank you I enjoyed the video...
@@alaskaenergyauthority7923 are you guys currently hiring ?
Look closely, the panels say 150k each. (N+1 would be 300k max. not that you'd run them at 100%)
@@alaskaenergyauthority7923 i have rented tow behind generators bigger than that.
How is the truck grounded?
Where are the gloves? Safety first!
Thank you for sharing sir new supporters here from Philippines
Luv this, and please allow me to share how this fare in ISO14001:2015 in one of its evaluation criteria: ruclips.net/video/fKu9UlARkzs/видео.html
We are the manufacturer of Hydraulic busbar Processing Machine. Our machine has bending Punching Cutting functions(3 in 1)and it can do work at the same time With SIEMENS Control System WhatsAPP:+86 158 0662 1650 F-mail: James.Wu@motiindustrial.com If you are interested in our machine,pls tell us your email , Detailed quotation will be sent to you. Sharing our operation video to you: www.motiindustrial.com/images/cnc_busbar_processing_machine_3_in_1_/113.html www.motiindustrial.com/
A nice video.
You look terrible growing a HITLER M-STASH. Sooner or later someone is going to remove it whether u like or not. Especially Jews who were tortured on orders from Hitler.
Nice and high quality boards then you see the disapointment, cheap, domestic internet router on the top of the first cabinet. Even more nerve racking, the SCADA computer is a Windows 10 machine....
That is all too common, even with NERC/CIP stuff. You should see military contractors...
What's wrong with it being on Windows 10, and what should it be instead?
@@gantmj A Linux or Unix distro is a good option, that's air gapped and thus not connected with the Internet.
@@gantmj Not bloated Windblows 10 with all its Updating, patching, and even doing what we used to call service packs without warning. Windows 7 was the last Desktop operating system.
@@djscrizzle I am not a linux/Unix guy but even I know this is correct. Needs to be a simple and reliable setup with random crap M$ does and is sneaky with.
Nicely explained
So many things wrong with this video
placards are faded a bit.
placards are for gasoline (1203), since they're hauling diesel they need to switch the placards to 1993
David Butimore either way they cannot be faded, discolored, or in anyway undefinable
Like any motorists would know what they meant anyway lol
Thanks
Thanks for the video. Regards from Vancouver Canada Johnson Controls office.
This is great
its very educational, also would you be kind to make a video on how to test the hole generator for burnt parts, i.e. excitor stator and armature with a multimeter on the ground. that should be highly thanked for.
Very cool. Seems like a well built system! How many total kw?
I'm not sure which site this is but we have plants that are from about 100 kw to well over a meg
@@alaskaenergyauthority7923 gotcha
@@alaskaenergyauthority7923 and this is gas powered? Natural gas?
@@Mike-kr5dn Diesel powered
@@alaskaenergyauthority7923 Doesnt Alaska have really good wind conditions? Are you involved in green energy in any way?
wonderful and educating
No ground strap?
What happen when diode broken?
Nice
Awesome