Видео

Excellent tip on the direction of the spline and the clips. Before I watched this video I was having a hard time cutting the screen and the razor kept slipping and cutting the face of the screen frame members. Turns out I was putting the flat side of the spline out. So tomorrow I will put the flat side facing in and I hope to find that the slippage of the razor cutter is minimized. BTW I haven't seen anyone on the videos using the hook blade on the spline tool for anything. Could you please recommend what that blade is useful for? Great video

You're so cute! Thanks.

I did not know about the clips and I was all set to install screen. I ended up using some leftover round spline and cut in two inch peace’s. I was able to temp the screen with them and remove as i installed the flat spline in the new screen. I hope this can help someone also.

6 years later and your video is still helping folks. I am about to replace the lower sections of my pool enclosure and have been dreading it. Your video seems to give me a little more courage, because the last time I tried to replace a screen was at least 15 - 20 years ago and it didn't go so well. I will order those clips, which are now branded as Lifestyle (as shown in your link), even though some reviewers say the material that the clips are made of is brittle and break easily. Thank you for your video. Here's to hoping my install goes well!

way cool! thanks.

Take it from a do it yoiuselfer to give us the best video out!!! All I could fine was a truck with there advertizing on the side and some guy measuring some openings?? My grandma could to the same. Thanks for the info!!

My spline is not going in like that. Are there different sizes? Could mine be too big? Home Depot only has one size the guy said there is only one

20 years doing handyman and still room for improvement. Salute 🫡✌🏻

I love you

Yeah, hell yeah Dad! That’s all I’ve been waiting for!

Thank-you for doing this tutorial on installing flat spline. Due to some bad storms in the FL Panhandle January 9th, one of my big screen panels was ripped in half. As an active female, closing in on 70, I decided to tackle this project by myself. I had already ordered some other clips which are so much more difficult for me to squeeze shut. I wish I had watched your tutorial first. I found you when I was having a heck of a time installing that spline. What took me almost over an hour on one section of spline turned into only minutes for each section for the rest of my project. Thank-you, thank-you, thank-you! Your instructions saved my sanity, downplayed my excessive speaking to myself in French and helped me get a project completed most men wouldn't tackle. This is "the best tutorial on RUclips to show you how to easily and effortlessly screen...using FLAT SPLINE!"

After watching your video I ordered the clips. They worked fantastically - thanks for the video

Mr Cook, I am a residential general contractor and I love to learn, my neighbor who is 81 got a quote for thousands of dollars to rescreen his outside porch so I took it on for him, your video taught me a new way and i was delighted,I got it done for less than a thousand and it gave me a new outlet for my business, I thank you very much and I hope this message finds you happy and healthy.....tim

In order to do it tight you hace to pull the screen tight not just roll in the spline. Your best bet is to go right to left. And that patio can be done solo in about 3 hours.

Great video!!

I've done it without the clips real easy. Just start in the center, and push the screen in with the roller, then work it in left to right across ,that holds it in enough for you to then put the spline in. Then do the bottom start in the center, then I do the sides.

Thanks for the tutorial!

excellent tutorial. You blew away all the other videos

Thanks!!!

Love these clips, been using them for years now. This is the only way to put up a screen solo and to save from using to much screen. I maximize my screen by measuring out the exact size I need with an extra inch on each end. I'm here because I can never remember which way the spline goes. Thanks for the reminder @ 4:00. edit. So I checked the link and it shows I purchased these back in 2017 for $20+ship. Now they are $12+ship. These are worth it at either price.

That was really cool Jason. I love the way all the experts come out of the wood work when people make a how to video. Thank you Jason.

I have the same frame you do. If the track is 1/8" what size flat spline did you use because i currently have .190 spline that keeps popping out with wind. Its 90% sun screen. Thanks a million for the advice and the best tutorial video ive seen on this.

Outstanding real-life screen flat spline installation tutorial. All the the others either showed spline installation without screen, spline installation with screen on a horizontal work surface, or no demonstrated use of the clips. Tutorial successfully made a real bitch job a walk in the park. My wife and dogs are also grateful - my frustration and frequent f-bombing ended after viewing Jason Cook's tutorial.

Phifer screen and spline manufacture says flat spline ok either way, round side down more common but round side up ok too.

Thank you so much. I just attemped a panel without any of that knowledge and it was a clown show as mentioned. Now I've ordered the clips and know how the flat spline is used. Bravo!

Brother are you kidding me. What a fantastic video. You make your time so useful when you have the right material and the right tools for the job. One thing more is that your terminology is absolutely perfect. Thank you

Thanks for making it clear which side goes in….your video helped A LOT

Please tell me what size spline you got. I got the .315 flat, but it seems too big. But I think you're using the same Lowe's frame I have, so maybe it is the right size and I'm not pushing hard enough. Please help. I'm really struggling with this.

That was NOT a close up. Show it better. I couldn't go buy spline based on that description. But you are the only one who talks about flat spline.

Best show and tell I have seen. Made a job that used to be so aggravating to do alone, so easy and quick.

Thanks so much,

Thanks for the close up shots and detailed explanation - very helpful!! I just watched a bunch of screen repair videos and yours is by far the best. Nice job!

I roll in screens for my job. I’ve never seen those clips before, but they could be useful for a beginner. Personally I think just one clip would be useful at the top somewhere to hold it up. Then I start the top, and make sure it’s all lined up. Right side is next, don’t gotta pull it just keep it straight, then when you get to the left side you gotta pull it, depends how strong the screen is as to how hard, same with the bottom, then you just fold the screen excess towards the screen and slice down the outer edge of the spline, and it gives it a perfect cut. I learned through a lot of frustration as the RUclips videos were lacking when I was new at it, but practice makes perfect so they say!

Thank you so much for information !!

awsome video,, getting ready to do some of that type spline and really wasn't to excited. done plenty of the round but when taking out the old screen and spline i was anticipating a tuff reinstall. now seems easy😎

Best video for screening, good job and thank you.

Thanks. Will reference this video when I start replacing one of my screens this week.

I used a few short pieces of round spline to hold the screen up , on each side while I installed the flat spline across the top.

Great info, I ordered my clips and will start a re-screen project soon, thanks for the great flat spline procedure.

Great job thank you helped me a lot! 👍🏻💥👏🏻

I'm fixing to re-screen my patio and this is exactly what i needed. Straight to the point! I noticed your old screen looked like it had some paint on it, did you also repaint the beams? What did you use for that because I'm thinking of painting mine white. Thank you

Thank you so much Sir. I needed this info. My hands and body ache. I did about the same size porch and it took me about 2 hours to figure out how to take out and install the new spline. I lost my patience couldn't figure it out so went to home Depot and replaced 300' of new flat spline with .160 round spline. Got to work on porch and found it to be much more easy. In the end it looked awesome till the winds picked up and later half the porch went to shit. I just looked at it for a while in pain scratching my head like what the F@#$ happened. Started to look for answer's but to no avail till I found your informative video. Gotta go and get back the flat spline i previously had but this time thanks to you Sir I'm on a mission. You made that look so easy. I'll be kicking my ass later cause I'm to tired to do it now. Lol. Bless you and thank you.

While u put all those clips in I’ve already finished all the walls lol

That's awesome my friend, you made my day

Awesome video great job. Gotta let the dog out lol

Great video, no dumb intro, straight to the point, and helpful tips. I have a screened in pool and I know someday I will need to replace some to the screen and your video shows me that it's not as intimidating as I originally thought it would be.

Bro!! I was going crazy trying to get this done for my screen door! You saved my sanity and made it so easy! Thank you for sharing!

The clips helped a lot. They were easier to move and saved time over using small pieces of spline. Thank you for a great video.

Thankyou, best out there

Duck Tape Really Works Great