Видео

Taylor David Lewis Daniel Young Nancy

Smith Mark Anderson Kimberly Thomas Sharon

Johnson Sarah Hall Sarah Allen Nancy

Thanks. Good idea. The freeze spray should work the same, and it come with a spray tube, avoiding direct pressing the butane tube on the screen.

i am really grateful for your tutorial, i had a power button on my computer that wouldnt work, it worked like a charm

Excellent explanation , In my opinion is very hard to repair this one, Thanks for your methodology

My friend, I think you have not modelled the hammer reset correctly. Could you please see once. Thanks.

Hi do you still have the cad files for the 1911 gbb animation that you did a while ago?

👏🏾👏🏾👏🏾👏🏾👏🏾👏🏾

Trying really ❤🎉🎉🎉

Hey, quick question. I think I lost my silver/metal looking firing pin from my M9 Beretta blowback. I'm not sure if that's a problem, I don't have any greengas to test the gun with, I was just fiddling with it at home. Are the firing pins on the average GBB pistol actuall critical for it to work or just cosmetic? Cheers.

How do you then connect this back into the Robox Printer?

One of the most useful and straight to the point videos on troubleshooting printing silk PLA. Thank you!

Genius!

Fantastic! Thanks! 🎸🎶🚗

Can you just separate the middleso you can replace the nozzle?

Is the nozzle hard too replace?

I've never done even a single print, I got a photon s an took it apart to try an fix(got it for free) and the main board came a bunch of unused headers, but among the headers it also has an ethernet port, with no connection when built but ima see if it let's me access the screen via the ethernet port, it also has a usb header but the plug is white which I believe is usb 1.0, does anyone know if I got an 3.1 or 3.2 for it it'll work with the higher speeds? also the board has a separate power jack on it idk why, But I think they just use a standard circuit board for a bunch of different devices. Looks like. The chip says arm, so another one says XiLINIX Spartan update can't get the internal jack to work can anyone tell me what the header is that is labeled JTAG has 2x5 pins, 10 total unlabeled, 1x5 pins 5 total, far right is ground unlabeled, 2x4 8 total lastly unlabeled 2x8 16 total, from top left pin D2 D3 CMD Gnd CK 3V3 D0 D1 Gnd RX2 TX2 5V0 Gnd RX1 TX1 5V0 THANK YOU anybody!!

Hi, my printer's Head is broken (Nozzle Error). I was wondering if you still make custom heads like this. Or if you could share details on how to make a custom head. I would really like to try reviving my old CEL ROBOX.

Hi Super random question I had to repair a 6 wire ribbon cable for my ps3 power buttton but some of the copper wire further down is also exposed the part that does not go inside the slot is this bad or would it be fine to use and does it matter what rotation the flex cable goes in>

anyone know where there are some files for the entire mechanism?

my man

Yerra gem! This was exactly what i needed!

Where does the maple leaf bucking go? It’s not specified in the video it came in a little baggy in my order

Life saving video! Thank you so much!

m100 at 50rps definitely getting premature engagement which will eat any piston you try

Isto é uma peça impressa em 3d? Sou do Brasil e preciso de um, mas por aqui esse equipamento e raro

I couldn't get through the first minute!! The sound of the incessant lip smacking each time he swallows the globs of snot that he's constantly snorting into his throat is fucking disgusting & unbearable!! 🤢🤢🤢 🤮🤮🤮 Consider getting a thicker cover (or ANY cover) for your microphone!!! It will reduce the amount of bodily fluids we have to listen to as you discharge them!! You might as well make videos while sitting on a toilet in a public restroom... that would be much less offensive to your audience!!!!! 😷😷😷 🤫🤫🤫

Where can i buy this, from Belgium. Hard time to order. Only see an ebay listing but its blocked for me.

Is the new barrel needed? I just ordered the hop up and the ported piston but I don’t know how to install the piston

I've had problems with the uzi not being able to clear a mag on full auto without running out or gass. This is also during reasonably warm temperatures

I can't remove my slide, it's a full metal 1911

I need help. That blue thing that takes the BB in the chamber sometimes doenst do what its suppsed to do. I dont k ow how to fix it

Hi, will this part work on a swissarms protector ? its also a co2 mini uzi.

How to know if flex cable has tiny wires broken, can they be visually inspected?

Ebay link dead

Grüß dich, Ich habe eine alte Drucker gekauft. Es hat Leider keine Originale Speicherkarte dabei . Kannst du mir bitte einen Kopie von deine Speicherkarte schicken?

11v lipo on a ngrs retarded move that 7.4v max

Can't the bottle just expand? And therefore it will not build up much pressure until the walls of the bottle are starting to stretch so to speak, and then the pressure will really start to build up to whatever pressure Co2 likes to be in? So won't it in fact take more Co2 to build up to that pressure?

"No full auto in buildings!" My honest reaction:

Thank You!!! My screen stopped working. I followed you directions and repaired without any issues. FYI, I used the wires from an old pair of wired headphones. They're super thin and very malleable. I also laid the digitizer then the lcd screen but didn't screw it too tight and it looks factory made.

casual rolex while recording this?

Had to repair a ribbon cable on a Roland D70, thanks for this....

Hi! I polished my WE Beretta using the same method. Everything was fine until I tried to polish the disassembly latch button. Somehow I managed to buff off the silver/chrome coating and the button became copper/bronze/orange. Looks pretty bad. Any ideas on how to restore the silver look of the button?

Very bad practices. Not to be recommended. There are far better instructional vids on YT about adaptation and configuration of FFCs. But if you can, just replace the cable. I doesn't cost the world.

I cannot for the life of me get one of the hex screws off. 😭 I was going to install the ported piston head and fps reducer.

Can you help me been eveywhere I get printing perfect and after 2 3 hours it packs up and the moment carnt run a temp test that goes above the first temperature block and carnt do a retraction test eaither direct drive

Thank you so much for your video! It saved me money and time while trying to make my Toyota Corolla E12 a/c control panel to work. Finding the exact replacement for the existing FFC was kind of a puzzle but as soon as I watched your video I thought I'd give it a try. Half an hour and a couple of attempts later it worked and I'm very happy! Thanks again and all the best to you my friend!

Where can I buy the project?

ive noticed a few innacuracies in your statements. but the most noteable one being you saying to go for bigger layer heights for higher strength,this has been proven untrue a few years ago by CNC kitchen,the strongest layer height is actually 0.15mm.also,PLA is the second strongest FDM 3d printing material,second to polycarbonate, also,ABS is NOT a good idea for anything structural,PETG will not work as good as PLA,your best bet would by either nylon,PLA+ or PC