Видео

@@jamesconn7311 thanks 👊🏼 ya like my creeper 🤣🤣 it’s a limited edition 👍🏻😂👊🏼🔧🔧🔧 yeah I figured there was going to be quite a few episodes so I thought I would number them for me and everyone else to keep track easier 🙌🏼👍🏻 thanks for watching 🙌🏼👊🏼🎥🎥🎥

@@andhotrodshop Thanks !!

@@CamshaftGarage 🤣🤣🤣 she did great for second time behind wheel 👍🏻👊🏼🙌🏼 next is backing up the trailer 👍🏻👊🏼🙌🏼

@andhotrodshop make sure you get some good video. We got some people that work with us that drives for a living and can't hardly back a trailer lol

@@CamshaftGarage I have been working with Angie for years on car trailers, now she is going to step her game up to the big leagues 😂😂😂

@andhotrodshop She's got nothing to worry about then the bigger the trailer the easier it is to back

@@keithsmith2952 blocks between the ???

@@andhotrodshop put blocks between the fame and the axle housing that way when the air dumbs out of the suspension it will be easier to get the drive shafts in

@@keithsmith2952 oh yeah now I get what you are saying 👊🏼👍🏻🙌🏼 yeah I ain’t going back in with it down 😂😂👍🏻🔧🔧🔧🔧 thanks for watching 👍🏻🙌🏼🎥🎥🎥

@@user-iy7yb1sh8g yes sir i painted each yoke so I know where it goes and what phase it was on 👍🏻👊🏼🙌🏼🔧🔧🔧🔧 I don’t always make the smartest decisions, but I tried to think ahead on this one 🤣🤣 👍🏻👊🏼🙌🏼🔧🔧🔧

We always called it timed, you will not believe the vibration it causes when not timed.

@@user-iy7yb1sh8g I got all these out pretty quick, guess it’s cause they were spinning on the caps, if they were old seized U joint would have been different story 😂😂😂 I know the tool you talking about, think Tiger makes the one I’m thinking about 🔧🔧🔧 thanks for watching 🎥🎥👍🏻👊🏼 we appreciate it

@@pauberrymon5892 more like putting off for years 😂😂😂😂

@@SouthMiamiMartialArt 😂😂😂

@@killitgameing658 it hold windows in place at 80mph too 😂😂😂😂

@@andhotrodshop there's a reason why the military calls duct tape 100 mph tape

@@killitgameing658 the duct tape came off at 60mph Ask me how I know 😂😂😂😂

@@andhotrodshop then that wasn't some very good tape

@@killitgameing658 no it wasn’t, it had been in the sun

@@mikesymbolik5647 😂😂🤣🤣👍🏻👊🏼

@@davidcantwell2489 you ain’t kidding 😂😂😂🤣

@@tyleradams4633 motor sounds great 👊🏼🙌🏼👍🏻 driveline not so much 🤣🤣🤣 thanks for watching 🙌🏼🎥🎥

@@dgiorgi2001 yeah I figured a honest review of how it went is best. Great system, but being a 1/2 smaller would have made a world of difference on installation 😂👍🏻🤣🔧🔧🔧 thanks for watching

@@alkennedy1124 it was the level sensor causing all my problems, the driveshafts were bound up shaking all the way up in transmission 👍🏻👊🏼🙌🏼🔧🔧🔧 by the way we are coming to California in October for Hot Rod Power Tour West 👊🏼👍🏻🙌🏼 thanks for watching, we appreciate it 🙌🏼👊🏼🎥🎥🎥

@@ronbruner7639 yup you are spot on 😂😂🔧🔧🔧 but I love it 😂😂 checkout episode 2 when we found the Bible verses in the seat, once I found those I was perfectly fine with it being a train wreck 🙏🏻🙏🏻🙏🏻 thanks for watching 👊🏼🎥🎥

@@bobbydaniel2874 if you coming to Covington you must be chip or stick hauling 🙌🏼👊🏼👍🏻 I got my start when they had those old green Mack’s running around that mill like ants 🤣🤣 yeah I have been to raphine shop, but that was before I bought truck. Might have to go back. Thanks for watching 👊🏼🙌🏼👊🏼🎥🎥🎥🎥

@@andhotrodshop I have hauled both. lol mostly flat bed these days . But I'll still get a ole chip wagon from time to time . For 15years straight every day covington that place place was home away from home lol . Whom did you drive for a what was or is your cb handle

@@bobbydaniel2874 I had to move the carbon tankers that were right at the end of the chip dump all the time, and going to the starch kitchen over the hill on railroad tracks was always a good time 🤣🤣🤣 I’m sure I have passed you somewhere 👍🏻👊🏼

@@robertstory7971 I’m sure spellcheck got you on that one 🤣🤣 check out episode 2, we found 2 bible verses that explained why the truck was supposed to end up here with us 🙏🏻🙏🏻 we will get her fixed up and rollin in no time 👍🏻👊🏼🙌🏼🔧🔧🔧 thanks for watching 👍🏻🙌🏼🎥🎥🎥

@@darylthisdelle7702 thanks 👍🏻👊🏼 I will take that as a huge compliment to get mentioned in the same sentence as twinsticks 🙌🏼🙌🏼👊🏼👍🏻🔧🔧🔧 I think I started following him about 5 or 6 episodes in, but I caught up real quick 😂😂 I’m actually enjoying working on Gertrude 🤣👍🏻🔧🔧 thanks for watching, we really appreciate it 👍🏻🎥🎥🎥

@@truckdriver656 yes sir, hopefully we got that fixed, had lots of people point that out to me, didn’t even think about it in the moment 😂😂🔧🙌🏼👊🏼👍🏻 thanks for watching 👍🏻👊🏼🎥🎥🎥

@@tonyasmith6596 thanks 👊🏼👍🏻🙌🏼🔧🔧🔧 thanks for watching 🎥🎥🙌🏼

@@toddepperson7465 🤣🤣🤣 that’s funny 😂😂 I love it 👊🏼👍🏻🙌🏼 thanks for watching and the comment 🎥🙌🏼

@@albertohing3200 thanks 🙌🏼👍🏻👊🏼 love this truck, it looks great 🙌🏼👍🏻👊🏼 thanks for watching 🙌🏼👊🏼🎥🎥

@@aldainsmith1866 I’m hoping everyone does watch this video 😂😂😂 but I’m still happy with our truck, once I found those prayers I knew it was meant for us to have this truck 🙏🏻🙏🏻 we will get it fix and be just fine 👍🏻👊🏼🙌🏼🔧🔧🔧 thanks for watching

@@keitha1971 have already sent them an email 👍🏻👊🏼 thanks for watching

SH Tube is on youtube and Rob is the man. He knows alot about Peterbilts and Cat engines.

@@tylerdunn6578 thanks I love the look, we think we have narrowed it down to leveling valve in the back was unhooked and had driveline at bad angles and was hitting U joints 👊🏼👍🏻🙌🏼🔧🔧🔧🔧 thanks for watching

@@jschmid thank ya, that’s a cool number to be on the likes 👊🏼🙌🏼👍🏻 thanks for watching, we appreciate it

@@DriveTFY thanks we got big plans, it’s just how many problems I find before we get to my plans 😂😂 that’s the question 🤣🤣🤣 thanks for watching

@@josephcox4319 it brings the haters out of the woodwork, but I just sit back and laugh. Some of the haters are so negative it’s comical 😂😂😂 yeah we will get her straightened out, just going to take time and money like everything else 👊🏼👍🏻🙌🏼👊🏼🤣🤣🔧🔧🔧🔧🔧 thanks for watching and not being a hater 😄🙌🏼

@@user-ze3mt3rf7c I tried that, didn’t answer messages Thanks for watching 🙌🏼👊🏼👍🏻 we appreciate it

@@user-ze3mt3rf7c yes sir we got a driveshaft guy all lined up. And we got level sensor fixed 👍🏻🙌🏼👊🏼🔧🔧🔧🔧

@@michaelbjohnston1968 yeah I remembered 10 minutes in 🤣🤣🤣

@@JohnDavidson-im3oz I’m sure they going to see it 👊🏼🙌🏼👍🏻🤣🤣🤣🔧🔧🔧 thanks for watching

Thanks brother

@@bryanritts213 yeah that’s what all the comments said too, hopefully nothing but U joints torn up 👍🏻🔧🔧👊🏼🙌🏼 thanks for watching

@@540Trucker yeah I hope so too, thanks I love the look of the truck, she just needs some love and will be just fine 🔧🔧🔧👍🏻👍🏻🙌🏼👊🏼

@@540Trucker I’m hoping it’s the easy fix everyone pointed out of the leveling valve 👍🏻👊🏼🙌🏼🔧🔧🔧 that’s a lot easier and cheaper that transmission 🤣🤣

@@user-hg5fm2id8e it sure sounds like a Muncie rock crusher down there don’t it 🤣🤣🤣🤣 thanks for watching

@@1lifeasis hey we will put anything as long as the customer is paying 👊🏼🙌🏼👍🏻🔧🔧🔧 we got some ideas to make SBF look good down in that engine bay 👍🏻🔧🔧 thanks for watching

@@andhotrodshop of course! Stoked to see the builds. Let’s goo!

both quarter panels will be getting cut off very soon

@@dwightatnip9487 previous owner told me they changed transmission 👍🏻👊🏼🙌🏼 yes the dash said 15 but transmission data tag says 13 👍🏻🔧👊🏼 wheelbase will be fine for what I’m going to do with truck, thanks for watching, we appreciate it

@@andhotrodshop I'm just an old old school independent owner operator... Good luck to you

@@dwightatnip9487 thank ya driver, this truck is a lot better than the 66 R model Mack i started in✋✋🔧🔧👍👍 i will do my best to keep it between the ditches and keep greasy side down 😂😂😂😂😂😂

@@Maranatha-1 I’m hoping you and all the others are right, even if I got to replace all the spinning U joint caps it will cost less than a transmission 👍🏻🙌🏼👊🏼🔧🔧🔧🔧 thanks for watching 👍🏻🎥🎥

@@lawrencebarber9781 what in the wide world of sports are you talking about? 😂😂😂

@@CrossLBar1883 thank you 👍🏻👊🏼🙌🏼 that’s great 👍🏻👊🏼 thanks for watching and the 300th like 👍🏻

ohhhh i hope the back order has gotten better, i can drive it with ignition switch i swapped out. But it would be nice to fix it right way. Thanks for watching

@@rshotrod1965 the visor is actually cracked and split from not being secured down. Yes it should have had well nuts in it, but it actually had like number 14 wood lag screws in it 😂😂😂 those just destroyed whatever holes was supposed to be there. Yeah I have gotten a bushing and bolt to put leveling valve together 🙌🏼🔧👊🏼👍🏻 I have a buddy that makes semi driveshafts for a living, going to send all 4 shafts to him 👍🏻👊🏼🙌🏼🔧🔧🔧 Yeah fuel tanks need several things, the gauges to work and the fuel to pull correctly 🤣😄 thanks for watching 👍🏻👊🏼🎥🎥🎥

@@andhotrodshopI have edited a bit on that comment, re read it if want.

@@rshotrod1965 when I pull the driveshafts I will check on all those hoses 👍🏻👊🏼🙌🏼🔧🔧🔧

@@rshotrod1965 yea sir I believe you are right, several people have pointed that out, and once someone said it it makes perfect sense. But in that moment I did not relate the 2 to each other. 👊🏼👍🏻🙌🏼🔧🔧🔧 99 Pete is only 5 year’s newer 👍🏻👊🏼🙌🏼 thanks for watching 👍🏻👊🏼🎥🎥

@@DB7GamingSimulator thanks, appreciate it 👍🏻👊🏼🔧🔧🔧🔧we will get her fixed up, also gave you a sub too, thanks for watching 🙌🏼👊🏼🎥🎥🎥

@andhotrodshop appreciate it!!! If you want to see some different part on your truck hit me up I'll make a replicat for you ! Like the 359 headlight you want. Sometimes it can help you to choose if you hesitate between two choices 👌🏼

I do keep that in the shop for all the old cars we work on, i also tried a product called lock lube. But sadly no success in getting switch to work. the lock lube did make it maybe 10% better, but its still worn slap out. I have a spare Dyno ignition switch in the truck till i can get a Peterbilt switch to put back in the truck. I like your thinking though 👍✋👌🔧🔧🔧🔧 thanks for watching ✋👍🎥🎥

@@andrepatterson1725 🙌🏼👊🏼👍🏻 for what I want to do it will be fine, city driving is not in my plans 😂👍🏻👊🏼🙌🏼 thanks for watching

@andhotrodshop good luck buddy 👍

@@andrepatterson1725 thanks i thought I was going to need a lot of luck coming home, but we tore interior out and found a bible verse tucked away in pass seat and decided it was meant to be 🙏🏻🙏🏻🙏🏻

@@jeraldmcwilson2189 yeah that’s about right 😂😂😂🙌🏼👊🏼🙌🏼