Видео

Sugru calls itself “moldable glue”

Depending on how the tear “lays” - it may or may not leak - good luck!

Way beyond my expectations - still have not bought a new seal to replace the one I patched.

Do you still have the same washing machine?

@@eugeniolettere5414 done my own a while back. First time I did it didn’t hold though I’d be sure this was because I bought a split pack of sugru from eBay and it didn’t have the best before date on it/ didn’t cure properly. Second time I done it was 6 months ago using the proper bought from Amazon stuff and it’s held up perfectly. Let it cure for at least 2 days before using the machine. Longer if the machine is in a cold place and you’re applying it thick. Edit: the machine has been used at least 20 times a month for past 6 months on hot/ medium/ cold washes at high spin too. Highly recommend sugru!

Thanks! I hope yours turns out great!

Good luck! Tears (from the eye) and tears (of the gasket) have the same spelling in English… I hope you no longer have either!

Agree - but that’s how you grow mold!

You ever get it fixed?

@@TheBigTimeBoiler I bought a new washer. wanted $370 just for seal....if also door or other problems additional $$. I wonder if I put too much on, or just means product does not work or that problem was beyond seal.

@@jeffzest8393 that's what I'm dealing with. Wondering if I am putting to much on. I'm actually moving and leaving behind washer with house at last minute. I've dealt with the little leaks for like a year but trying to make it nicer for new owners. I just bought a new seal tho but may have them deal with installation of it

@jeff no idea why I had leaks the first two times, but mine is a combination washer/dryer. It’s a condensing dryer (not forced air) - but I wonder if the little bit of heat plus vacuum was enough to correct any imperfections

Finger pressure did a good job squeezing some material out the cracks. I added a bit in the back just to reinforce everything (but only because I had some Sugru left over)

This was my first ever project with Sugru - had I stopped messing with it around 4:15, I would have been done... just after that I say "oops" as I accidentally pull the pieces apart & then have to do the repair one more time (after which I say "I'm going to stop messing with it" - so that I don't pull it apart again!). Hope that helps. :)

Definitely have a few shiny unknown now…

Irene Henry depends on what you mean. Sugru can be molded to replace missing parts, but it will be a lot more complicated than what I showed in this video

@@praguecr4006 worked great thanks very much

@@irenehenry4767 any luck with your fix?

Hey how long did this hack last before needing to do it again

No mold!

Thanks for the feedback. I agree. Time-lapse is a simple cheat when you’re having trouble cutting down & It’s a delicate balance saying too little/saying too much.

I don’t remember there being a lock on the compartment - especially from the outside. But you could bring a cable lock to lock your bag and secure it to the luggage rack.

There are 2 stewards in every bussiness class car, so I think it's pretty secure.

Way to go! I hope your solution lasts as long as you need it to!

There are multiple train companies and several different era train cars in operation... some business class seats are highly adjustable (can even make them lie flat)... others have minimal adjustments. On this trip to Vienna, we had the nicest seats (fully adjustable, lie flat). No real way to elevate legs separately though. Maybe someone makes an inflatable bolster? Good luck & enjoy exploring. There’s treasure everywhere... :)

PragueCR Thank you so much for the info! Inflatable bolster? How interesting, hadn’t thought of that at all! Time to investigate 😜

Believe me - I was concerned too! Between Sugru & baby gates, we've been able to fix the situation :)

PragueCR 😂

Lols

haruke mutsushita - yes, to complete your Pokédex! Good luck! I hope you are able to find one during Go Fest!

Agreed. It's like nothing was learned from Larvitar Community Day. I'm putting together my next video now & I'm not gentle on Niantic because of this.... (that being said, after 2pm, things were much better in the city center - but there was a Bermuda Triangle that Niantic never fixed on the west side of Westfalenpark). I hope you were able to enjoy the day in spite of all of the (preventable) problems...

Děkuji mnohokrát! 😃

No signs of mold or mildew... As with any front load washer, remember to leave the door open to prevent things from growing...

Many thanks - I've just given this a go and waiting for the Sugru to set now!

I hope your project was as successful as mine!

Ling Li did it work?

yes, it worked a treat!

Yes! So far, so good...

Yes there’s plenty of space above your head in each cabin. Enjoy your trip!

It was a day to remember!

Martin2035 thanks! This one was fun... it almost edited itself :)

scaussie75 if I can do it, you can do it! Good luck!

@@praguecr4006 Did not work for me, and I used a lot more than you. Perhaps I have a door problem too? But tear and leak both at 6:00.I wonder why the torn area and now "fixed" area is always at 6:00?

Probably gravity... as the drum spins the clothes can’t go up past around 10 o’clock, so they fall down to the 6 o’clock position - and once in a while I guess they pull the gasket away from the door.

@@praguecr4006 Makes sense....and that is always where the tears occur. I am going to try again and see if leaks a second time. I have two packets left, and if still leaks may put on inside/back. But perhaps another problem? I did ask about this on a pay site called "Just Answers" I subscribe to and response by two techs was as follows: "Hi my name is Nathan and I am sorry to hear you are having an water leak on your washer, if the door seal is torn then the only solution is to replace the door seal. I am only telling you what I have found after many years of experience, glue might work for awhile but it is not the correct repair. If you want to take a chance of a damage floor because of a door seal then use the glue. You will not have to replace the door only the seal." and the other said: "The seals are specially made fro such appliances with proper fitting to prevent leaking. A glue will most certainly not prevent leaking and it doe not matter how strong it is. I have seen the product you mentioned and the problem will not be fixed by this product. You will have to buy a new pair of seals that will totally fix the problem. Other than that, you will only make a temporary solution with such glues and the problem will occur again." Hold long since your repair? Curious why you had leaks the first two times but not after that? Thanks. Cute child : )

I second what the responders say. Sugru did not work for me. I could not replicate the exact thickness for the repair to seal and create the right suction. And i was pretty accurate. Sugru just didnt work to thinness required to replicate which is essential. It did stop some of the leak and was slower and I was ok with this. Stiff joints and lack of strength in hands stopped me replacing seal myself. I loved the product but not for washing machine seals.

No, you can only ever have one free (orange) raid pass in inventory... They don't stack like the premium (green) ones.

PragueCR oh okay thanks 😁

Great idea, I’m working on booking travel for our next adventure tonight! I’ll see what shows up from ČD & ÖBB - I’ll even mention your comment if it works out! Thanks!

+PragueCR Noproblem, I'm looking forward for it.

Cool! I hadn’t heard of Uhu glue! I’ll try to find some and test them head-to-head :)

Have a great time! I hope you enjoy Regiojet business class as much as we did!

3 new subs in 3 hours?! I love you guys! How did you find my video? :)

I really appreciate it! Heading to your channel shortly to check things out!

Thanks! Great to have you here! I look forward to checking out your channel :)