mse
mse
  • Видео 9
  • Просмотров 173 664
Siglent SDG1032X 30MHz vs SDG2042X 40MHz Function Generator comparising
I had the opportunity to compare 2 functions generators before buy.
thanks to BATRONIX.COM
Here's what was important for me to decide, not really looking on the price tag.
Просмотров: 1 796

Видео

UNI-T UT 511 Insulation Tester, Review and what to do with it
Просмотров 36 тыс.2 года назад
Here i will show you the Insulation Resistance Tester UT 511 from UNI-T and what kind of measurements are possible. The UT 511 is the cheapest tester in a series of 3 models. The price is from about 100 € (UT511) up to a bit more than 300€ (UT513).
Thermal Imaging Camera HT-04D Test and what to do with it
Просмотров 2,4 тыс.3 года назад
In this video i check the thermal imaging camera HT-04D from HTI. It costs about 270 €. It makes a lot of fun working with it. Included are some examples what to do with such a camera. I hope you find it helpful
S-60W-12 extremely cheap Power Supply 12V 5A from banggood for less than 6€
Просмотров 10 тыс.3 года назад
I found this Switching Power Supply on banggood.com for unbelievable 5,50€ incl. shipping. It's rated with 12V / 5A and is very small. This is a short review. If you want to look at it: www.banggood.com/Geekcreit-AC-100-240V-to-DC-12V-5A-60W-Switching-Power-Supply-Module-Driver-Adapter-LED-Strip-Light-p-1441620.html?rmmds=myorder&cur_warehouse=CZ
Review of Mustool G1200 digital microscope, test
Просмотров 11 тыс.3 года назад
A short review of the Mustool G1200 digital microscope and connecting it to a computer.
Rigol vs Siglent 4 channel scopes review, test
Просмотров 52 тыс.4 года назад
I had the opportunity to test the Rigol DS1104Z Plus and the Siglent SDS1104X-E oscilloscopes before to buy one of them. Both 4 channel scopes are specified as 100MHz digital Oscilloscopes and in the price range of 500 €. I hope you will find the video useful for your decision which one to buy.
Laserwasserwaage Bosch PLL5 Kurztest
Просмотров 16 тыс.5 лет назад
Kurzer Test der Bosch Laser Wasserwaage PLL5
UpConverter mit NE602 Mischer & Filter im Eingang
Просмотров 3238 лет назад
Anschluß eines UpConverters an einen DVB-T Stick. UpConverter erhältlich bei www.ms-electronic.com
FeelTech Signal Generator FY3200S, FY3224S
Просмотров 44 тыс.8 лет назад
Functional Test of the Dual Channel DDS Signal Generator

Комментарии

  • @Leitner86
    @Leitner86 Месяц назад

    Does anyone know how high the measuring current is for the low resistance measurement?

  • @williambutlersr.4587
    @williambutlersr.4587 2 месяца назад

    Wish you had shown what video capture software you used to show the images on your computer.

    • @mse6424
      @mse6424 Месяц назад

      Windows 10 has a camera app

  • @Musicconfigworld
    @Musicconfigworld 3 месяца назад

    Thanks

  • @gerardohocino1338
    @gerardohocino1338 4 месяца назад

    what is part number of this ic

  • @GuillermoLeib
    @GuillermoLeib 5 месяцев назад

    Good walkthrough. Thank you!

  • @hossamel-din5047
    @hossamel-din5047 5 месяцев назад

    Please what is the number of regulator 8 pin

  • @mirola73
    @mirola73 8 месяцев назад

    Well done, thank you. Especially the part where you showed hot/cold spots of your house was useful as that's what I'm intending to use it for.

  • @uweweltin5276
    @uweweltin5276 9 месяцев назад

    what about low frequency waveform quality; e.g. rectangle at 1 hz 19Vpp

    • @mse6424
      @mse6424 8 месяцев назад

      at 0.1Hz (19V) the rectangle has a rise time of 810us and looks perfect

    • @uweweltin5276
      @uweweltin5276 8 месяцев назад

      @@mse6424 thank you, that is exactly what I need. I will order one SDG2042 today. Like you I searched a lot… waiting for your bode tutorial

    • @mse6424
      @mse6424 8 месяцев назад

      @@uweweltin5276 Batronix in Preetz, Germany was very helpful, they sent both generators for test and I decided to keep the 2042

  • @JohnUsp
    @JohnUsp 9 месяцев назад

    Interesting comparison, seems the SDG1032X has a better signal quality than SDG2042X.

  • @emmanuelagyemang8519
    @emmanuelagyemang8519 10 месяцев назад

    Thank you sir

  • @copitolapara5134
    @copitolapara5134 11 месяцев назад

    what regulator does it use

  • @bajatoma
    @bajatoma 11 месяцев назад

    Thanks for putting this video together Overall - happy with the purchase?

    • @mse6424
      @mse6424 11 месяцев назад

      Thanks for your comment. And yes overall happy....

  • @Vinny2142
    @Vinny2142 Год назад

    Hey there, hope all is well and appreciate your detailed reviews. Have a question for you when you have time.. I'm a retired electrical engineer and would like to buy a more modern 4 channel oscilloscope as more of a hobby item use than profession. In my later years the job I had did not require much use of one, so I'm a bit rusty, but presently I own an old 60mhz analog scope. In your experience - which of these two 4-channel models would you recommend? I'm torn between Siglent or Rigol currently, but open to suggestions. Just trying to get the most bang for the buck basically. Siglent 1204-XE Rigol DS1054Z Thanks again for your advice!

    • @dtiydr
      @dtiydr 9 месяцев назад

      Siglent is a little better brand and much more like the button layout on them as well. What many do, as well as I did, is that buy the 1104X-E for a much cheaper price and then with a software key (that you can not buy but exist on the internet) "hack" and change it to a 1204X-E and get 200MHz bandwidth.

  • @faisalnawaz7467
    @faisalnawaz7467 Год назад

    I have same with me in our project to perform IR but it show OL even when perform IR and Resistance bar goes up

  • @ganzeytyler
    @ganzeytyler Год назад

    i know this video is a bit old, but have you figured out a way to export images from these? thanks.

    • @mse6424
      @mse6424 Год назад

      IT has a USB connector on top. Which will act as a normal usb-drive, so you can copy the images to a pc in bmp format.

    • @ganzeytyler
      @ganzeytyler Год назад

      @@mse6424 hmmm, must be something wrong with mine then, ive treid with known good cables and computers, oh well.

    • @mse6424
      @mse6424 Год назад

      The camera has to be switched on...

    • @ganzeytyler
      @ganzeytyler Год назад

      @@mse6424 yup, its on. computer(s) dont recognize it being plugged in (still charges), i can plug an old phone in with same cable and it detects it. its ok, its been well used for 3 or so years, time for an upgrade i suppose.

    • @ganzeytyler
      @ganzeytyler Год назад

      @@mse6424 i ended up tearing it apart and measuring continuity between a usb cable plugged in and the legs on the motherboard, open circuit on data+. soldered in a new usb port and now i can connect it to my computer.

  • @slime904
    @slime904 Год назад

    Thanks! Quite helpful video.

  • @autotechnik665
    @autotechnik665 Год назад

    ❤️💪Thanks very mutch for the video! 🤗

  • @Spreefuchs1960
    @Spreefuchs1960 Год назад

    Kurz und knapp das Wesentliche! Danke

  • @ronaldbardalez6318
    @ronaldbardalez6318 Год назад

    It's noisy. Makes this buzzing sound when working

    • @razmanrhoads2078
      @razmanrhoads2078 5 месяцев назад

      Thats why my z313 speaker had buzzing noise when i put this psu in there?

  • @mrpetit2
    @mrpetit2 Год назад

    Thanks for testing and showing the difference with very low voltage signals👍

  • @SpeccyMan
    @SpeccyMan Год назад

    The 24MHz frequency is only for the sine wave as mentioned in the specifications for this device! The maximum frequency for all other waveforms is considerably lower.

  • @nathanruben3372
    @nathanruben3372 Год назад

    Hello, I subscribed. I hava a question. Eventually, if you were to buy one of them out of your pocket, which one would you choose.

    • @mse6424
      @mse6424 Год назад

      Hi Nathan, i had both scopes for compare and decided to buy the siglent for me. A very little more expensive, but it has a better front-end (the inputs are low noise) and i think the frequency range is a bit higher after modification

  • @grerlab2777
    @grerlab2777 Год назад

    Thanks for the video... will there be more videos with the use of the UT511...?✌

    • @mse6424
      @mse6424 Год назад

      Hi, thank you for your interest. I´m thinking of more things i can do with this instrument, but right now it's not enough for a new video. (i.e: you can check the leakage current of capacitors.... but be very careful handling the tested caps!!!)

  • @ahmadclips
    @ahmadclips Год назад

    Very informative video please share reviews of UT 513A

    • @mse6424
      @mse6424 Год назад

      Hi Muhammad, as i bought the UT 511 for my workbench, i have no access to the UT 513. But the procedure will be the same

  • @ahmadclips
    @ahmadclips Год назад

    UT 513A operation

  • @SurvivalSquirrel
    @SurvivalSquirrel Год назад

    Thanks for the video! What is the difference between the 04 and the 02?

    • @mse6424
      @mse6424 Год назад

      HT-02 has a lower screen resolution, 60x60 pixel

  • @mortenlund1418
    @mortenlund1418 Год назад

    Thanks for sharing. Perfect

  • @MadaraUCHIHA-hy9xe
    @MadaraUCHIHA-hy9xe 2 года назад

    What's your opinion about the device ?

    • @mse6424
      @mse6424 Год назад

      Hi, sorry for late answer. Though it has limited purpose, I`m quite satisfied with this device. And yes you're right, this type of batteries is a mess :-)

  • @MadaraUCHIHA-hy9xe
    @MadaraUCHIHA-hy9xe 2 года назад

    Thank you for the review But they should change this type of battery

  • @30mAkills
    @30mAkills 2 года назад

    Useful

  • @jercysanchez8531
    @jercysanchez8531 2 года назад

    A consult... Test DAR?

  • @jacquesmertens3369
    @jacquesmertens3369 2 года назад

    Very informative. Thanks. We could of course also decide to stop buying anything from China. That would save us a few headaches.

  • @spastroboy
    @spastroboy 2 года назад

    Is there an official website? Firmware update? Also when it's charging but not being used does the led light turn on ?

  • @takbunthorn6153
    @takbunthorn6153 2 года назад

    I like your review...... please adding more about the insulation test.

  • @VictorSchelsinger
    @VictorSchelsinger 2 года назад

    Goob job!

  • @spicky2966
    @spicky2966 2 года назад

    Nice video tks

  • @KAMERKURUM
    @KAMERKURUM 2 года назад

    Thanks for giving information insulation tester.

  • @yurkshirelad
    @yurkshirelad 2 года назад

    I'm surprised that the siglent doesn't have a proper power button and uses so much power in standby mode.

    • @robbieaussievic
      @robbieaussievic 2 года назад

      .... I turn mine off on a power board after it shuts down. (SDS2352X-E) 4W quiescent standby is unacceptable in contemporary consumer devices. (We travelled to the moon on less than 4W).

    • @AndersHellquist
      @AndersHellquist Год назад

      @@robbieaussievic Yeah, we traveled to the moon with a thing made of sticks wrapped in tinfoil ;-)

  • @srinivashbhoi2226
    @srinivashbhoi2226 2 года назад

    Why its shows OL On Screen.?

    • @mse6424
      @mse6424 2 года назад

      Hi, measuring current or voltage with a multimeter, you have to choose the measuring range on the meter (if it's not a autorange...). Lets say you set the 20V range, that means the meter will show values up to 20V. If you have 21Volts on the meter Input, the meter will show "OL" for OverLoad (the voltage is too high to be displayed). Then you have to switch to the next higher range: 200V. The meter will now show 21Volt. If you are measuring Resistance (Ohms) and the TestLeads are open, the meter will show "OL" for an Open Loop. If you shorten the Test Leads, or put a resistor between (inside the range!) the meter will show the value.

    • @mihaipopa2330
      @mihaipopa2330 Год назад

      @@mse6424 OL = Open Loop not OverLoad!!! And has nothing to do with voltage to high but with resistance to high in Ohm measurements.

  • @pengawaspenyerumalutaubat8365
    @pengawaspenyerumalutaubat8365 2 года назад

    Indonesia👏👏👏😊👍

  • @CatPixStudio
    @CatPixStudio 2 года назад

    Great review! Thanks! Is it possible to set the 1st timer to 30sec and the 2nd timer to 60sec to calculate the dielectric absorption ratio? Or is it even already implemented?

    • @mse6424
      @mse6424 2 года назад

      yes, you can set each timer between 5 seconds and 29:30 minutes by pressing the timer button and than the arrows right/left.

  • @donepearce
    @donepearce 2 года назад

    The web server on the Siglent is not the right way to control a scope. The Rigol uses standard protocols which allow it to be integrated into a testing environment along with other GPIB-controlled gear.

    • @sihilius
      @sihilius 2 года назад

      The Siglent can be controlled over ethernet, using the SCPI commands given in the "Siglent SDS Remote Programming Manual" and considering the pricepoint thats quite impressive already. Also I am not so sure if i'd want to use either of these scopes in a Test environment. I'd Probably prefer a techtronix or something comparable for that kind of purpose. Those scopes are probably better suited for enthusiats, students and such, not so much for professional use.

  • @zoozolplexOne
    @zoozolplexOne 2 года назад

    cool !!!

  • @vjrperalta6321
    @vjrperalta6321 2 года назад

    is that unit can be used while charging?!,.

    • @mse6424
      @mse6424 2 года назад

      Yes U can use it while charging!

  • @poeml
    @poeml 2 года назад

    Very nice demonstration, thank you

  • @marius.verdes
    @marius.verdes 2 года назад

    Hi, you can make a video with a ground measurement at home?

    • @mse6424
      @mse6424 2 года назад

      i will try to make one next time...

  • @J0HNWICK
    @J0HNWICK 2 года назад

    Danke

  • @avadharayati4615
    @avadharayati4615 2 года назад

    can it make sweep on both channels independently ?

    • @mse6424
      @mse6424 2 года назад

      Hmmm, i did not test this, but i guess it will not

    • @avadharayati4615
      @avadharayati4615 2 года назад

      @@mse6424 Thanks!

  • @clems6989
    @clems6989 2 года назад

    THANK YOU!!!! After watching several comparisons on youtube. This one sealed my choice.....

    • @mse6424
      @mse6424 2 года назад

      good to hear that. What is your choice?

    • @clems6989
      @clems6989 2 года назад

      Siglent !

  • @vonniecorrigan2040
    @vonniecorrigan2040 2 года назад

    Every the ad says it is!