I’m buying a 40th 500 just for the graphics. I had a ZX7 back in the day and I miss that color scheme. I would get the 4RR but two bikes are just better for the money at that price. RS660 and GSXS 8R. I won’t ride it much but just admire it. My daily is a Tiger 900GTP.
The zx4rr is double the price of a ninja 500,if your a more experienced rider get the zx4rr does need a ecu tune for full power but if you’re a beginner get the ninja 500 anything on two wheels is fun when you’re starting off
@@Jayjewelerofficial Good answer, but the Ninja 500 also needs an ECU tune for full power. You can add like 10 ponies to that bitty with a full exhaust, velocity stacks, and an ECU flash.
This looks like the Titanium slip-on from Akrapovic. What people do not understand is that if you choose to install an exhaust that is certified and complies with regulations for street legal use it cannot be any louder than the stock one. It will make a better sound you will only be able to appreciate in person, not through a mike. You can go with a non-certiifed exhaust that is louder or check if you can remove the baffle on this one to get more noise, but then you may have to retune your ecu as well.
Sato makes the sickest sound of all pipes on the RC. It has a lower tone with an echo in the pop. Sato high sides just look sooo good too. I had two brothers on my TLR and I was always envious. I split traffic up the 605 behind one of these man did that sound sweet.
If you look straight into the muffler from behind, you will see through the gap where the bolt is that holds the baffle in place. You will just need to make your best estimation and mark the location. I used painters tape and a black sharpie to mark the spot. From there I used a step drill bit, to drill the hole. Once you’ve drilled through, you will see a hex bolt, I forget the size but will check and get back with the size. Once the bolt is off, I used a long nose to pull the baffle out. I used a rubber grommet I got from O’Reilly’s to plug the hole.
The ninja 400 sounds shit, regardless of what you put on it. if you want a nice sounding bike you need an inline 4, ZX6R, R6, or something similar. i have a ninja 650 with full akrapovic system, it sounds ok for a parallel twin, but in comparison a zx6r sounds awesome with just a slip on.
@@owenmonast9582 Personally to me the Akra sounds a lot better than the stock lol. I bought my 400 with the Akrapovic Carbon slip-on installed already from the dealer. But a part of me do wish it was deeper.
Beautiful exhaust. So torn between this and the carbon that has the removable baffle. Such a shame that Akro didn't make it easy to remove the insert on this one. It's my understanding you have to drill a hole on the side to get to the screw. If you ever decide to remove it, definitely make a vid! Impossible to find a vid that shows the removal process for this model.
Splendid i love you❤❤❤❤❤❤
Bro this guys rippin twisties near top of 5th and 6th gear while im worried about reaching top speed lmao. nice stuff!
👌
Great bike!
Which turn signals are this?
@@bostjankokot505 It’s from any of the newer model Kawasaki’s such as the z900 or z650.
Why ur tire moving in neutral?
idiot doesn't know how to stay in his own lane
Do peoples heels still hit the exhaust with the akrapovic installed?
I’m buying a 40th 500 just for the graphics. I had a ZX7 back in the day and I miss that color scheme. I would get the 4RR but two bikes are just better for the money at that price. RS660 and GSXS 8R. I won’t ride it much but just admire it. My daily is a Tiger 900GTP.
Great footage!
What do you think of your Ninja 500 so far? Thinking about making any mods to it?
Nice run.
Thanks!
Cool! Do you feel it's worth paying the extra and going for the ZX4? Can't really beat two more cylinders in terms of engine feel.
The zx4rr is double the price of a ninja 500,if your a more experienced rider get the zx4rr does need a ecu tune for full power but if you’re a beginner get the ninja 500 anything on two wheels is fun when you’re starting off
Thank you for the video, but I am new. I can't tell which one is the Kawasaki and which one is the Kawasaki. Again, thank you for the video; I am new.
@@Jayjewelerofficial Good answer, but the Ninja 500 also needs an ECU tune for full power. You can add like 10 ponies to that bitty with a full exhaust, velocity stacks, and an ECU flash.
@@josh_ari Ninja 500R following ZX4RR....
Definitely yes. I have one. Love it!!!!!
This looks like the Titanium slip-on from Akrapovic. What people do not understand is that if you choose to install an exhaust that is certified and complies with regulations for street legal use it cannot be any louder than the stock one. It will make a better sound you will only be able to appreciate in person, not through a mike. You can go with a non-certiifed exhaust that is louder or check if you can remove the baffle on this one to get more noise, but then you may have to retune your ecu as well.
Sato makes the sickest sound of all pipes on the RC. It has a lower tone with an echo in the pop. Sato high sides just look sooo good too. I had two brothers on my TLR and I was always envious. I split traffic up the 605 behind one of these man did that sound sweet.
why does a 400cc sound so rubbish
no muffler sounds the best
Stock Muffler 00:16 Akrapovic: 01:02 The Akrapovic Titanium sounds like the saccomoto exhaust with the baffle in, sounds great!
Queremos ver la moto estúpido
Don't you lose HP and back pressure without the baffle?
that's....not how it works....
Actually, it sometimes is how it works.@@tabryis
Please share the link to buy full titanium exhaust.
Linda moto pero que sonido más feo
idk akrapovic is so overrated, I'd much rather have a mivv exhaust for half of the price while sounding much better
Finally! I have the exact same bike & exhaust and I wanna do this!
Sounds good! Can you still hear the cool intake sounds?
Nothing happens 🤣😂😅 Sorry but sound check FAILED 😁
LoL the Leo Vince slip on sounds much better, that new exhaust sounded stock
Parabéns pelo vídeo...Abraço do Canal D Ninja do Brasil!!
sounds great!
Nothing changed 😂😂
Except the exhaust lol
If you look straight into the muffler from behind, you will see through the gap where the bolt is that holds the baffle in place. You will just need to make your best estimation and mark the location. I used painters tape and a black sharpie to mark the spot. From there I used a step drill bit, to drill the hole. Once you’ve drilled through, you will see a hex bolt, I forget the size but will check and get back with the size. Once the bolt is off, I used a long nose to pull the baffle out. I used a rubber grommet I got from O’Reilly’s to plug the hole.
How did you remove the dB killer so cleanly?
ruclips.net/video/0TWHb5cH7I0/видео.html
How to remove the baffle?
How do you take the baffle out?
ruclips.net/video/0TWHb5cH7I0/видео.html
The ninja 400 sounds shit, regardless of what you put on it. if you want a nice sounding bike you need an inline 4, ZX6R, R6, or something similar. i have a ninja 650 with full akrapovic system, it sounds ok for a parallel twin, but in comparison a zx6r sounds awesome with just a slip on.
ZX6R, R6,...in city...overheat, 1st gear only , wrist back legit pain, under 7k rpmno acceleration
Which sport bike is advice to buy
how much hp you want? sportbike or naked bike?
Without baffle wins ..
ruclips.net/video/4LRQUKzvZPM/видео.html Speed video Kawasaki
This sound Trump bike
your country is shit
yikesssss. same sound.
same sound,less weight, looks good👍
Very cool bike. Here's my 400 ruclips.net/video/o2KfaBQegRw/видео.html how much does that акрюабык weigh?
1.3kg less than stock
Go Without baffle
sounds the same with the new exhaust. lol
That’s what Iv been saying!!! I put a delkevic slip-on on my z400 and it’s such a deep note I love it
@@owenmonast9582 Personally to me the Akra sounds a lot better than the stock lol. I bought my 400 with the Akrapovic Carbon slip-on installed already from the dealer. But a part of me do wish it was deeper.
Bought one at the 600 mile service....the size reduction alone is worth it.
Db killer is on
@@SeamTressGaming yes and other exhausts sound way better even with the db killer, while also being 1/2 of the price
To be honest, they both sound amazing. If you ever do another vid on these, would love to see where exactly you drilled to get to the baffle screw.
ruclips.net/video/0TWHb5cH7I0/видео.html
Beautiful exhaust. So torn between this and the carbon that has the removable baffle. Such a shame that Akro didn't make it easy to remove the insert on this one. It's my understanding you have to drill a hole on the side to get to the screw. If you ever decide to remove it, definitely make a vid! Impossible to find a vid that shows the removal process for this model.