Видео

​@@viktorjordanov3197 if you don't have the same configuration as in the video, you as a user will not be able to make those changes, I am in the same situation. Be careful, if you have an oversized pump, these settings will not help you, because they modify the maximum values, not the minimum ones.

@@viktorjordanov3197 no, you cant. I am in the same situation.

Намерихте ли решение​@@florin.batincu8098

??🤔

In the Android and ISO versions on 2024-12-30, the V1.22.0 version of GREE+ was released, and the error code troubleshooting instructions for network configuration failure were added.

Turn WPA3 OUT in the router

same setup, same problem, same error message. used to work for about two years and started with that error. Smart WIFI app works and Home Assistant does not. I'd be careful buying Chinese expansive products. It's always good in the first two years but no more than that.

Спасибо за внимание

When the AC fails to cool effectively, it will effectively display the fault code at that time.

SD08:sends information to WiFi module to check information. 1. Check whether the hot spot of wifi module is released; 2. Check whether the user's operation steps are correct. Suggestion: Use a mobile phone as a hotspot, because the APP only supports 2.4G spectrum, not the 5.0G spectrum of the router, and the mobile phone hotspot is 2.4G

The heat generated by the water pump is negligible and will not affect efficiency. However, if it is moved indoors, the water pump will generate noise, which will have a greater impact on people who are sensitive to noise, so please pay attention to this. In addition, if you need to upgrade the program, you need to contact the after-sales service of Gree headquarters through the local agent.

@@dexianchen4155 Hello, on the original controller I don't have these settings options, I contacted Gree Romania and they sent me a new updated controller, which has these options, but which cannot be paired with my heat pump, what do you advise me to do to solve the problem. In my case, the heat pump is oversized, I understood that a power reduction can be made from the position of the bridges at JUMPER 1, I have a 12kw monoblock pump and I would like to decrease the power, I tried with the controller's power limitation, but it didn't help, I'm interested in it modulating more towards minimum power. Thank you

@@florin.batincu8098 1. Provide the barcode and other information of the unit you are using, and we will see which wire controller can match your unit 2. What is your current demand for the unit? Do you want to reduce the unit power by using a jumper cap? You need to provide the unit information 3. In addition to reducing the unit demand, do you have other needs?

@@florin.batincu8098 do you have any further news? I sent you a message on your channel, the one with a red shirt and dark glasses

It is recommended to check whether the connected router is 5G spectrum. The WiFi module is suitable for 2.4 spectrum. It is recommended to adjust the router or mobile hotspot to try (the spectrum of mobile hotspot is 2.4G)

in every part of cycle?

This unit uses R134a refrigerant, the high pressure protection is about 44°C (1130KPa), the low pressure is 0°C (293KPa), and it is OK within this range

I'm really sorry, we don't know how to make videos, we just upload videos related to our company

@@norazaalihassan 1. The motor bearings are worn or corroded, causing abnormal noises 2. The motor bearings cannot be repaired because it is difficult to restore after disassembling the motor. Professional tools are required. It is recommended that the repairer replace the motor 3. The screw fasteners connecting the crossflow fan blades to the motor shaft may be loose, causing abnormal noises, or the crossflow fan blades may be damaged, causing the motor and the crossflow fan blades to be unbalanced, causing abnormal noises.

Same here shit

Worsen situation

Same for me. Stuck at 69%

I was able to overcome the situation. I followed the following steps. 1. Manually forgot my home wifi and ac hotspot wifi from my phone. 2. Restarted my phone. 3. Connected my phone to home wifi. 4. Uninstalled and reinstalled the Gree+ app. 5. Logged in to Gree+ app and tried to add my AC again 6. This time the app first asked me to select home wifi and input home wifi password before asking for AC hotspot password, so I selected home wifi and input my home wifi password. 7. Selected app hotspot and input the password 12345678 as the app suggested. 8. My app was successfully able to connect my AC to internet! I think forgetting the networks and reinstalling the app helped me. Cheers 🎉

​@@mm83904 thanks soooo mutch its working!!🎉

You can purchase this model controller through your local Gree agent.

HI! I have this command and some gree internal drives. Do I have to give the modbus addresses to the internal units? how do I do it? I don't have a wired control panel for internal units. They tell me that software is needed. Can you help me find it?