Видео

@despencer9028 Thank you for watching.I did not, and I am glad yours came out nice

@quevicular LOL. I was for sure glad it was done. My wife was my camera operator, so I had to behave. Thank you for watching.

@@averagemaintenance3875 how many pulleys are there all together? Is there two idler pulleys and two pulleys on the tensioner pulley? I really couldn't find an answer to this anywhere. My friend has a vibration with noise and hope it's not the water pump but it's got enough miles on it that justify all the pulleys being replaced.

@quevicular To not misinform, you can check for yourself the diagram at 0:40 mark and see how many pulleys are there considering what tensioner is, colling compressor, alternator, and more. In my opinion, water pump and tensioners are most prone to go bad. But it's hard to tell with older cars. Good luck.

@@averagemaintenance3875 okay thank you very much for the video regardless.

@BigChrLife I can hear it in operation when close to it, but in my opinion it is a very quiet washer.

@reydelcastillo17 When hardwired, there is no need to charge it ever.

Good to know. Thank you.

Спасибо за просмотр и комментарий. Приятно знать разные варианты, если кому-то это понадобится.

Он этого не знал 😊

@@willywonka4186 Посмотрите оригинальное видео на отметке 5:30, когда работаете с передними тормозами. ruclips.net/video/cyfmITDAZlI/видео.htmlsi=7IbY7pj6_UEwteac

@jaceevans979 So far, yes,only on kitchen knifes.

@@camouflagejumpsuit Research is important to get what you want, but you are right there is less of the options nowadays. I am surprised about no returns options.

@@NancyThiede-qg5pq You are welcome. Thank you for watching.

@despencer9028 Thank you for watching, and I am glad my video helped you. It is good to save money, not going to the mechanic, and risking having mechanics do bad job by skipping something and/ or breaking something else.

@@nickgillispie340 I am glad it helped.

@@AmericanVet.4everJesusAmen It is cold smoke. Thank you for watching.

@averagemaintenance3875 thank you for clearing that up for me. What is the name of that firebox you used so I can look for it. Liked what you did.

@AmericanVet.4everJesusAmen Dyna Glo, purchased at Home Depot. See the link below. I had a much better price at time of purchase, though. Good luck building one, it is fun. www.homedepot.com/p/Dyna-Glo-Signature-Series-Table-Top-Charcoal-Grill-Side-Firebox-DGSS287CB-D/301579504

@@martykantz3440 I have never cold smoked chicken and would not be able to tell you that. Thank you for watching.

who tf doesn't rinse their dishes before putting them in the dishwasher?

@@johnernest5505 to quote many articles, Experts uniformly agree that rinsing dishes is a waste of water and makes the dishwasher less efficient. (Feel free to Google "should I rinse dishes before I put them in the dishwasher." Scraping food off is all that should be required. I've been using dishwashers since I was a kid, so for nearly 50 years, and this is the first dishwasher we've had this problem with. PS no need to swear.

I'm sorry to hear you had all those problems.My dishwasher is good so far. I think at least rinsing a big chunk of food should help to avoid cloging.

@@averagemaintenance3875 from lots of Google searches, this model has lots of problems with the pump clogging. I'm not new to dishwasher use. This is the first dishwasher that we've had this problem, with constant draining problems.

@hamedalrafai2043 You are welcome. My son figured this method out, and I wanted to share it on YT. Today's prices are ridiculous, and it is good to be able to do some things yourself.

@@robparker1625 You are welcome. I am pleased to know you could use my video to set it up.

Thank you for watching and commenting.

@@arthurjohnson3646 Thank you. I am glad you think so.

@averagemaintenance3875 just did my 2004 camry this week...really not difficult when a person knows how...

@arthurjohnson3646 2004!!!!. It is amazing that you still drive it. You really know what you are doing. Good job.

2004 Camry Se..Silver..Spoiler...200,000 miles...was 27K on sticker...bought in 2008 for 13,400.. with 49k miles... Also...2008..Scion XB...270K...same 2.4 liter engine as Camry...Also 2013 Scion Xb...268K...same engine... 11,000 completed Uber/lyft rides...thats really 22,000 trips... only Camry has been to an emergency mechanic 1 time... All other repairs and maintenance done by myself...200plus270kplus268k...738,000 miles...on 3 used Toyota products...and 4700 doordash deliveries...

@arthurjohnson3646 It is good that you can do your own maintenance and support your delivery business.

@@anthonyjacksonjr4812 Thank you for watching.

@@Niafunn I am glad you think so and I could help you. Thank you for watching.

It was very good while it was in my possession and for a little less than a year my son has it. He told me they love it and don't have any problems with it.

@@averagemaintenance3875 oh thank you so much. We were in 2 minds given all the bad reviews online.

@unitycatalog I understand. Reviews can be confusing and scary, depending on who likes what. My goal is reliability as number one, and everything else is good if the price is right. After I gifted this to my son , I purchased less of the options washer, but the same quality. So far I like new one and you could see it on my Chanel. I hope it helps you to make good decision. Good luck, and thank you for watching and commenting.

@@MrAllStarFame Bisons.

@@christianmeyer6731 Great.

I attached link to the video.

Thank you for watching.

I am glad to hear that. Thank you for watching.

@@HagisMurderhornet Tnank you.

@charlesh1735 At least it is manageable. Some cars have it worse. Like PCV on this Camry. Thank you for watching.

@@Brentonious Did you or do you own one?

@4321superkris Just make sure that belt is on all pulleys before working with tensioner. Whatever way is easier for you to go around. It is always good to have someone to help you to keep a belt in place before working on tensioner. Good luck.

@lylithmussington4959 Sorry that happened. To find replacement parts, try. www.repairclinic.com, or www.supplyhouse.com

@ritaritata3457 Try to turn it off for longer than one minute and then turn it back agai. Switch braker if hardwired. One more thing that comes to my mind is press the Cancel button and hold it for longer than 3 seconds. Try it even when other buttons if Cancel does not work.

👍

@pennilessjester211 My was a little cheeper.🙂

19.95 😅

@@FezCaliph All one payment.😄

@@gaylemamabutterfly You are welcome. Thank you for watching and commenting.

@@averagemaintenance3875 Hi again, thank you, thank you again. When I removed the filter thing, it was so disgusting and under it was full of gunk too. I used chopsticks to pick it out. Did a load and oh my goodness that smell is gone. Take care.

@@jaredanderson6623 You are welcome. I am glad to hear that. Easy and money saving.

@user-ci7tz1fb2v I am sorry to hear that you have all the issues with replacement. Looks like corrective action needs to be issued. 😄

@@Fix_it_yourself311 You are welcome. Same here. Can't function till I have a cup.☕️

@@topcat5992 I did not see any rust.

@@averagemaintenance3875 great, thank you for responding. Another reviewer spoke about rust on a new unit in 1 year. How long is the regular cycle?

@topcat5992 You welcome. It is washing at the moment, I will check it out when done and let you know.

@topcat5992 I watched the video, and at 3:08, you could see when I go through cycles. The normal cycle is 2 :53 long.

@@averagemaintenance3875 Appreciate the info! Wow 2:57 is too long isn't it which equals to $$$ water and electricity $$$?My 16 year old whirlpool finally gave up (started running all night) but it's usual cycle was around the 75 min mark. Newer dishwashers, I thought should be more efficient and sounds like the Maytags are no longer like the ones built to last atleast 15 yrs. Thanks again for responding.

Some water will always be there, but I believe that heated drying should get rid of it. Also, try to empty the bottom rack first to avoid water dripping on dishes.

⁠@@averagemaintenance3875Thank you so much for your response! The top one holds quite a bit of water (almost like a running faucet) so I was not sure if it was because there is a leveling issue or the arm has some problems. It’s good to know it’s normal to have some water there. Thanks again!

@hannah67368 That seems like a lot of water and it makes sense to check the level of dishwasher, If you did not already. An additional question I have is, does that happen with all the cycles?

@@averagemaintenance3875we didn’t check the level when it was installed. Yes it happens with all the cycles. Some of the times there seem to be more than the others. Thanks!

@hannah67368 it is easy to check the level with adjusting two front legs, after you take bottomfront cover off, I think you can do it yourself. Good luck.

@talongar7889 LOL, it looks like treadmill.

@@edward_dantonio Thank you. I will consider that.

@@averagemaintenance3875 it makes a large improvement but if you have cracks on the plastic liner above the sliding glass window, the water leak will continue.

@edward_dantonio I have a crack on the plastic liner, and the silicone I applied is working so far. Thank you.

@@averagemaintenance3875 thanks, I am going to tell my dealership to do this trick!

@edward_dantonio Thank you. If you remember, share what they say, with the rest of us.👍

@@korpcounter01 Agree.

Definitely.

@@smvallet As long as you have it fixed.

Was it a recall? My truck is doing the same and my headliner is wet. I also keep shorting out the rear bed light bulbs. I think it’s all from the bad seal???

@@dailygrinders89 It’s not a recall. Ram sent out a letter saying they were extending the warranty on the seals on the fin and back window lights. I called to see if they would also cover the window seal and they did.

@dailygrinders89 I heard you could go to the dealer and get it fixed, but different people have different stories. See comments on my video and check out other's videos .Do you homework and than decide what to do. Good luck.

@dailygrinder89 My dealer wanted to charge me $1200 plus labor to replace the window. Said there was no way to cover it. When I called Ram Warranty Services, they made the call to cover it and gave me a reference code to give to the dealer.

@gsd321123gh I am not sure after all this time, but I think it was P0422.

I gifted my 5105 to my son and wanted to buy same brand but a little bit simpler due to current prices . Both clean the same good. Old one was more technologically advanced. In my opinion one thing that is better with new one is noise. New one is a little bit more quieter.

Espero que mi video y los comentarios de diferentes personas puedan ayudarte a tomar una decisión sobre qué hacer.

Thank you. Good to know.

Thank you for your kind comment and for watching. It makes me feel good knowing my videos help someone else.