- Видео 10
- Просмотров 233 102
Buckle Up Studios
Добавлен 9 ноя 2011
Make Your Own Giant & Affordable FAT HEAD CUTOUTS – An Easy DIY Guide!
In this video I'll show you a DIY tutorial on how to make Big Head Cardboard cutouts! 🎉 Whether you're supporting your favorite team, planning a party or just looking for a fun & quirky project, these oversized heads are the perfect way to draw attention and make a statement.
This step-by-step video will walk you through the process of making your own larger than life cutout at home without any expensive tools or specialty printers.
Share your completed heads in the comments - I'd love to hear how they turn out! 🎉✨
🖌️ Materials Needed:
Here's the link to order your print: amzn.to/49g3mqH (click 'Glossy/Matte paper' in the sidebar)
Other things you need for the project
- 20x30 Foam Board: amzn....
This step-by-step video will walk you through the process of making your own larger than life cutout at home without any expensive tools or specialty printers.
Share your completed heads in the comments - I'd love to hear how they turn out! 🎉✨
🖌️ Materials Needed:
Here's the link to order your print: amzn.to/49g3mqH (click 'Glossy/Matte paper' in the sidebar)
Other things you need for the project
- 20x30 Foam Board: amzn....
Просмотров: 9 584
Видео
HOW TO REPLACE the Front Wiper Blades on a 2013-2016 Mazda CX-5 - SUPER EASY
Просмотров 22 тыс.Год назад
How to replace the front wiper blades on a 2013, 2014, 2015, 2016 Mazda CX-5. It's very easy, you can do it yourself in less than a minute. The dealership quoted me $55 to do this. Here's a link to the front wiper blades that I bought: amzn.to/3Hw48Ua The above link is an Amazon affiliate link.
HOW TO REPLACE the Rear Wiper Blade on a 2013-2023 Mazda CX-5 - SUPER EASY
Просмотров 29 тыс.Год назад
How to replace the rear wiper blade on a 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 Mazda CX-5. It's very easy, you can do it yourself in less than a minute. The dealership quoted me $35 to do this. Here's a link to the rear wiper blade that I bought: amzn.to/3AJIN5O The above link is an Amazon affiliate link.
HOW TO REPAIR A BENT CANOPY - Easy and cheap to do yourself
Просмотров 17 тыс.2 года назад
Have a bent canopy frame? Use a flat steel bar to fix the truss bars and make it even stronger than it was before. Don't pay a ton of money for canopy replacement parts or buy a new pop up canopy. It's very easy to do it yourself! Materials Needed: Steel Flat Bar: amzn.to/3S4OfaK Drill Bit For Steel: amzn.to/3cRw6gl Center Punch: amzn.to/3YM4qgP Tools I used: Hacksaw: amzn.to/3ScDlQb Dremel: am...
HOW TO REPLACE Engine Air Filter on a 2013-2019 Mazda CX5 - SUPER EASY
Просмотров 8 тыс.2 года назад
How to replace the engine air filter on a 2013, 2014, 2015, 2016, 2017, 2018, 2019 Mazda CX-5. It's very easy, you can do it yourself in less than a few minutes. The dealership quoted me $65 to do this. Here's a link to the cabin air filter I bought: amzn.to/3Mqe5lE The above link is an Amazon affiliate link.
HOW TO REPLACE Cabin Air Filter on a 2013-2020 Mazda CX5 - SUPER EASY
Просмотров 7 тыс.2 года назад
How to replace the cabin air filter on a 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020 Mazda CX-5. It's very easy, you can do it yourself in less than a few minutes. The dealership quoted me $65 to do this. Here's a link to the cabin air filter I bought: amzn.to/3NYA0kU The above link is an Amazon affiliate link.
HOW TO REPLACE Engine Air Filter on a 2016-2020 Kia Sorento - SUPER EASY
Просмотров 9 тыс.2 года назад
How to replace the engine air filter on a 2016, 2017, 2018, 2019, 2020 Kia Sorento. It's very easy, you can do it yourself in less than two minutes. The dealership quoted me $65 to do this. Here's a link to the engine air filter I bought: amzn.to/49EWm5B The above link is an Amazon affiliate link.
HOW TO REPLACE Cabin Air Filter on a 2016-2020 Kia Sorento - SUPER EASY
Просмотров 9 тыс.2 года назад
How to replace the cabin air filter on a 2016, 2017, 2018, 2019, 2020 Kia Sorento. It's very easy, you can do it yourself in less than a few minutes. The dealership quoted me $65 to do this. Here's a link to the cabin air filter I bought: amzn.to/3OJxQaX The above link is an Amazon affiliate link.
PAINTING A RUSTY REFRIGERATOR | From Rusty to Brand New with Rust-Oleum Appliance Epoxy
Просмотров 52 тыс.2 года назад
How to refinish/paint an old rusty refrigerator. This is a step-by-step guide to show you how to make your old refrigerator look brand new. I'm really happy with how everything turned out. It's really easy, you can do it yourself in an afternoon. Everything you need for the project: STEP 1: Remove Handles & Plugs -Screwdriver STEP 2: Clean & Sand - Degreaser Cleaning or Dishsoap - 150 Grit Sand...
HOW TO REPLACE Spark Plugs on a 2013-2017 Mazda CX-5 - SUPER EASY
Просмотров 70 тыс.4 года назад
How to replace spark plugs on a 2013, 2014, 2015, 2016, 2017 Mazda CX-5. It's very easy, you can do it yourself in less than 15 minutes. What you need for the job: - NGK Laser Iridium Spark Plugs (need to buy 4 total): amzn.to/3P5y51j - 9/16-Inch Spark Plug Socket: amzn.to/2SeLJ4e - 8mm Socket - Socket Wrench - Socket Wrench Extension Here's a link to a starter Socket Wrench set with 8mm socket...
I have seen videos and comments that you must use a torque wrench to put spark plugs back on otherwise you can damage the engine. Please comment
Thanks! I probably should have used a torque wrench, but I didn't have one. It's a good idea to use one. The torque specs are: Cast Iron: 10.8-18 lb. ft. Aluminum: 10.8-14.5 lb. ft.
This is a great video. Few pointers since I had to do 3 cars. (1) 6" or more socket extension is a must (2) Have handy a breaker bar. For 1 car needed it since 1 spark plug had seized. (3) A socket wrench of course. For these items and the spark plug socket I found the best price at Harbor Freight. At least 50% cheaper overall I found than AZ or Loews or HD. Its not that this is required to be done for a living thus for such 1 off cases their quality is good enough.
Great pointers! The 6" extension and breaker bar are definitely helpful, and Harbor Freight is a solid choice for affordable tools, especially for one-off jobs. Thanks for sharing your experience!
Dealership quoted me $160 😂😂😂
Insane! 🤑
longtime outdoor crafter here our canopy broke at the middle joint i cut a small piece and put a bolt on either side of the brake to hold the new center pivot in place . most damage occur in high winds we have found that 5 gallon buckets of water work great as weights, some no slip mat glued on the bottom help - doggy augurs work the best IF you can use them- ALWAYS weight or stake down!! we once saw a canopy Sucked up AFTER a storm went by 200 ft in the air flipped upside down and dropped on a car NOT a good day for anyone there. also if you are at a show many times you can pick up a damaged canopy in the dumpsters after the show for parts, im kind of a hoarder in that way:) good luck all have fun
Thanks for the tips! The bucket weights and doggy augurs are great ideas. I can't imagine seeing a canopy fly like that-wild! I'll keep those suggestions in mind. Thanks again!
I am in need of tightening the area that moves between the canopy rails, mine have too much play and makes the top bars bow, looks like rubber washers but nylon might be better for squeezing?
@@BuckleUpWeb we have also used the little boat ratchets- 5/16 cord to form an X in the sides to keep the canopy from twisting and racking
@@brentkasl6510 check at the hardware stores-- lowes , home depot ect. you might find some thin steel but originals were nylon i believe so they slip against each other
@@frrapp2366 That's a great idea too!
Thanks for the $65 savings! 1 minute of work… exactly as you described 👏
Great, glad I could help!!😃
what is the calibration in the spark plug calibration? what is the torque for the spark plug? is copper grease needed? also I did not see you using dielectric grease,
Thank you for the tutorial and link.
Glad I could help!😃
Where is the link
There's a link in the description under the video 👍
nice job!!!
Thank you!
I tried it myself and it went perfectly. I had trouble taking the air filter cover off but after that it went perfect, thanks
Great, glad to hear it! So much cheaper and easier than paying somebody else to do it!
Thanks, You just saved me around $500 from going to the dealership, but, why do they charge so much? For something this simple to do?? Just did it in 15 minutes today 😂
Good question! Glad I could help!
Wow. Well, now, don't I feel stupid. Thanks so much! Glad I came in and looked this up before I broke something.
Haha, yeah it's definitely not intuitive! Glad I could help!
You forgot to mention the gap! If plugs have been dropped or roughly handed, they can be out of spec. Wrong gap can weaken the internal explosion. Food for thought.
The spark plugs I bought come pre-gapped, but you're right, it's best to check them first!
I'm thinking I'll seal openings with plastic sheeting as I tape/mask off the inside edge. That way I can refinish doors outside. Audio is very low up all the way.
That's a great idea, it will certainly make it easier than painting the doors much easier! Good luck!
Thanks
You're welcome!
Easy and simple demonstration
Thank, glad I could help!
thanks for video. Just saved me $500, which is what the dealership was charging me for the easy job.
Great! Glad to hear I could help!
Same to me
what a rip off dealers are
@@ZenPepperClub Especially for easy things like this!
Outstanding Video.. That's also a great business opportunity in reinforcing people's canopy tents! :)
Thanks so much!
Roughly how much did it cost you?
I'd say roughly $50
Thanks so much!
No problem!
You saved me $200
Great! Happy to hear it!
Do you know what’s the number of the cylinders? Going from left to right? One resource said it’s 3-2-1-4 But I fixed but and it’s still giving me problem! Btw great video! I never done it before but I did it
I'm not sure the order of the cylinders - the wires should go on the same way they came off. Did you mix up the wires?
Thanks so much for this!!! I couldn't for the life of me figure out why I couldn't get enough angle to get the blade on!
Glad I could help! I had so much trouble the first time too!
Once i pulled that back cover off, the blade still wouldn’t lift all the way for me on my 2022. I accidentally broke a bit of the back part of the blade trying to figure out why it wouldn’t lift. Although i have an ugly piece now showing, i can now slide in a new blade with ease. 😒
Just did this job in 30 minutes, thanks for the great video!
Great, so glad to hear I could help!
Do you need to disconnect the battery to do this? Also how often the coils need to be replaced? I have 80000 miles on my mazda.
this would be my question too
They wanted to charge me $128 to do this thank you bro
So crazy! Glad I could help save you a bunch of money!
Hi! What do you consider a high quality photo and how do I make sure I do that?
You want to make sure you have a clear shot of the person you'd like to use, hopefully using a camera with as high of a resolution as possible. A professional photograph would be ideal, but those are not as easy to get so a clear photo of the person with your phone would be the next best option
hmmm...I had to unlock a plastic lever on top before I was able to slide mine out. And my new blade apparatus was different than my old one. lol
Looks like this eill be an easy job. I may also have to reolace the valve cover gasket too. I noticed a little bit of oil maybe seeping out from thr back. Hopefully thats not a tough job.
The spark plugs will be easy! Hopefully the rest goes easy too!
Baaaarrr! Your voice makes my skin crawl.
Amazing! Super clear and straightforward. One question: how tight should the spark plugs be put back in? Is there any specified torque spec for them or is it good to just tighten it 'enough'?
Thanks! I probably should have used a torque wrench, but I didn't have one. It's not a bad idea to use one if you have one. The torque specs are: Cast Iron: 10.8-18 lb. ft. Aluminum: 10.8-14.5 lb. ft.
@@BuckleUpWeb Thank you for finding these for me!
Doing this on my wife's car later today with your video as a guide! This is so much infinitely easier than on my 2015 Subaru Outback. Might take 15 minutes compared to several hours. Thanks for the video!
Oh yeah, this will be much easier than the Outback! The CX-5 spark plugs are so easy to get to. Good luck!
I believe you left out one important step and specification what is the spark plug gap I thought I would find it in the description link. I though I listened and watched the whole video. Maybe I missed it.
@@kennascales The spark plugs I bought came pre-gapped - but yes, very good point, if the spark plugs don't come pre-gapped you definitely want to make sure you gap them.
@@BuckleUpWeb you know even if they come pre-gap doesn't mean they're were set correctly or they hadn't been dropped you just don't know. I think it is important to always check and set if not within range. I appreciate you responding. I curious why you didn't share what the recommended gap is. I guess that's why I'm here Lol. Gap for 2016 CX5 is. . 041 - 051 also found . 044 hope this helps someone like me.
@@kennascales Thanks for sharing that. That's a good point - it is probably best to always double check to make sure the gaps are accurate. Thanks again!
Do you have a video on how to do the cutout face the process?
I show some of the cutout process starting at around 5:40 in the video but I don't have a full video of just the cutting process unfortunately.
Thank you!
You're welcome!
How bad does the epoxy smell? Is there a strong smell to it?
There is a smell while it dries but after it dries there is no smell. It's probably best if you can paint it outside, however that wasn't possible for me.
Thank you!
You're welcome!!
I'm likely going to be buying a 2015 Mazda CX-5 later today. Replacing a crappy old Mercury Mariner. I bought plugs to replace on the Mariner last fall, then learned that you have to disassemble like the entire top of the engine bay guts, lots of parts and wires and tubes and covers, etc. Super complicated just to gain access to the 3 spark plugs facing the firewall. It was insane. I never even bothered. I'll gift the plugs to whoever I sell it to. Ford engineers were lunatics on that one.
Good luck on the CX-5! I've been very happy with mine. Easy spark plugs is a big plus!
You never gapped them
The spark plugs I used came pre-gapped, so no need to gap them yourself if you use the same ones I did.
I was wondering can you buy replacement parts for your pop up ?
I called the company and I can buy replacement parts but they're ridiculously expensive!
@@BuckleUpWeb ok thank you
You forgot to cap it ! Other then that! Great idea!
what about the mazda cx 30? i took the cap off and it still wont go up
Sorry, I'm not sure about the cx30 - I would guess it would be similar to the cx5, but I'm not sure why the blade wouldn't come off once the cap is off
I'm having difficulty also on my 2021 cx30
Nice video
Thanks!!
So which brand of deep socket 9/16" is good for replace park plug.do u have any suggestions sir.Thank
Yep! There's a link in the description to the socket I used!
I'm trying to to find the 9/16" socket to change .Actually I have 1 set of Stanley tool.When I took 1 socket 9/16" from this set to put the the new park plug.But that socket is sort not enough space to hold park plug .
How about some anti-seize on the threads, other wise great video.
Thanks! I checked on NGK's website (the manufacturer of the spark plugs I used in the video) and they said not to put anti-seize on the spark plugs. I'm not sure if it would really hurt but I didn't put any on
Do you need to gap the spark plugs still? We did a long time ago, I haven't had to do this in a while lol
The spark plugs I used came pre-gapped, so no need to gap them yourself if you use the same ones I did. Check with the manufacturer if you end up using a different spark plug brand!
This video is good. Process is simple.
Great! happy to hear it helped!
Just what I needed. A quick, straight to the point video. Thank you!
Great, glad it helped!
I was about to force the wiper up, but I’m glad you made this video. Massive thank you.
Haha, I almost forced it to the first time!
THANK YOU 🙏🏾, just did it and took me maybe 20 minutes cause I was watching video doing it lol but got it done .z subscribed
Great! You saved yourself a bunch of money!