Видео

Did you consider attaching the new water tube to the old and just pull it through?

where did you get the portable laser power meter

Had to like for the "iiiiidentical" from MCV.

Hello, excellent. Please, the diameter of the hole of your laser head is 2 mm? Because it is not the same for connecting devices and it affects the secondary pressure.

Excellent video. I'm about to add the same compressor to my 100W laser. The difference in scorch is worth the effort to me. Your vid reinforces this to me. One suggestion. Turn your phone sideways and you'll get an easier to view video.

So you just have to replace the tube, power supply, and move some hose to fit? That’s pretty easy!!😊

I am just now looking at upgrading my air assist and ran across your video. Did you just hook the California air up bypassing the OEM air assist? Or did you put in a solenoid and wire everything to the controller as well?

Have you ever thought about using CO2 gas at 3psi in place of air?

Great VIdeo, and how you show everyone the setup. The only thing I say is missing is a shut off valve so the air doesnt keep pushing out when you are done. I added mine at the connector to the compressor.

nice magnets, where you get them from?

That is a hyundai compressor rebranded.

Would be great if you added the affiliate links to the magnates, and air compressor. :) Great video!

Hello, very well clarified in detail, are there any videos or explanations on how I can complete the air compressor on my Omtech 80 watt please?

ciao se hai ancora il compressore quello colore oro me lo venderesti mi dici anche il modello .Grazie

Did you have to do anything when switching out your power supply ? Anything settings wise on lightburn.

i currently also have a 60 Watt omtech and when I need to replace the tube plan to upgrade to 100 Watt or maybe 80 Watt as you did. I appreciate this video immensely. You mentioned yo have a box - I will call it the laser tube extension shroud. where did you get it. I don't see it as an accessory on the omtech web site.

Thanks for the great info!

Can you add the 3d print tube mount somewhere so I can go with a friend and print?

Am saving to buy an OMTech 55-60w 1624. This upgrade confirms my decision to buy & upgrade as needed. Thanks!

Informative video thanks

do you have an idea of the PSI on the upgraded air assist?

how much did it improve performance? I'm thinking about upgrading mine it has a hard time cutting 1/4" plywood now

Hello there. Thanks for the vid. At 2:49 where can I find one of these. I'd like to use my air compressor to see if it makes any difference ....

The cheapo pump that came with my laser died within 3 days, but I had a little airbrush compressor that worked pretty well, but I am still getting more scorching than you are with 15 or 30 psi. I wonder if I should get a tank for the compressor to fill so I can get a greater airflow?

Can I ask why you 60w tube isn’t cutting most of them out

Thanks dude. I wanted to keep my stock aquarium pump but i will be getting an California one.

Curious how the haileah small vs the largest compared on cuts? Also, Curious is one of these reduce the soot on the edges?

good video, bad layout. bit of advice though. First, the compressor has a regulator, so unless yours is broken, there's no need for a 2nd one at the head. Second, if you're going to run a moisture trap like that, place it closest to the tool, not the source. The air hasn't had a chance to condense as much at the head as it's still quite hot. You'll find it serves a far better purpose closest to the tool. With that said, those California Air Tools compressors rock. I used one for years for airbrushing and it's very quiet. You can hold a conversation easily while it is running. I just finished setting up a 60w co2 laser and ran a regulator/trap on the side of the machine and am feeding it off my 80g monster compressor. This helps me get an idea of some settings for the psi to run at for sure. Thanks much!

Ah yes indubitably good vid i show to my kids they love it

learn how to frame the camera.

Thanks Sir for sharing this, absolutely helpful for a beginner like me. I’m waiting for my omt 60w laser to arrive and already thinking about upgrading it. I was wondering if you would be interested in sharing a tutorial on how to connect a compressor to the machine? Thank you for your time anyway!

thanks for this. I'm considering upgrading my air assist. Nice to get a comparative view of psi.

Laser tube extension box? Anybody sell this?

Where you get the laser power test device?

How much did you spend?

Wow! did not think that that much air is that positive and makes so much differance.

Gracias

Awesome video. I have a quiet Harbor freight compressor which I will now definitely find a way to connect to my laser.

Thanks for your information, it's very helpful. I'd like to ask, what happens if you run the compressor approximately for an hour. Is the compressor capable of filling itself during that 1 hour cut, can it provide air without stopping? Or do you need better compressor with a larger air volume. Thanks in advance..

Im super new to laser cutting but it seems like there should have been a little more power for the cutting. Also with that long skinny coil hose if you have 30psi at the regulator before the hose you will have considerable pressure drop at the laser. Id be guessing closer to 20psi.

Thanks for the comparison, I'm receiving my machine shortly so I will definitely be upgrading to a standalone compressor 😀 Just a little heads up if you don't mind, please video in landscape mode, makes a much nicer viewing…

Nice comparison! Is that the 60W machine? How do you like it? Looking at getting the 55W. At 30ish psi how much is that compressor running? Have heard they do not hold up if running close to continuous.