Видео

Flexco only recommends recessing the covers of the belt to allow for a low profile splice. Removing parts of the carcass of the belt weakens the belt since the carcass is what creates the strength of the belt.

Please reach out directly to your local distributor or sales representative for specific pricing information. Visit Flexco.com if you need further information.

Hello you can find out how to purchase the cordless belt cutter by visiting www.flexco.com/NA/EN/Flexco/Contact-Us.htm At this time we do not sell directly to customers, also feel free to reach out to your local distributor as well.

Three reasons- Safety, Safety, Safety!

Click on the contact us button on our website (www.Flexco.com) to get connected to your local sales representative or distributor

In the US this is the ordering number and item code information. If you are in a different region outside the US or Canada you can use this a reference and you should be all set- www.flexco.com/EN/Product/4423/BoltBreaker.htm

Hello, here is a link you can use to contact our team in India- flexco.in/IN/EN/Flexco/Contact-Us.htm

The best way to get in touch with us in your region is to visit Flexco.com and click on the "contact with Flexco" button on the right side of the page. From there you will see several ways to contact our India regional office.

That is called a silver ink marking pen (Item code 01350 in the US/Canada)

Yes but only in North America at the moment! Contact your local NA Flexco territory manager or distributor and they will be able to assist you!

This should be what you need in addition to the IOM (located on Flexco.com) ruclips.net/video/yegpHdVvlT4/видео.html

Can you clarify your question for us a little further? If possible please indicate the specific timecode your question relates to. Thank you!

@@FlexcoTube Is this setting for the conveyor belt to move on its way?

@@alibayezit9395 If we understand your question correctly this is a clamp to assist with maintenance on the belt. You will need to stop the belt before installing the TUG clamp on the belt.

It is recommended to place wood or hard surface underneath to prevent the bolt from backing out. If the bolt does back out you can hammer them back into location making sure the tabs realign. In addition, hand tightening the nuts so the plates contact the belt cover will help prevent the bolt from backing out.

We would respectfully disagree, especially with a wider belt. Even so the Power Belt Cutter cuts straighter and most importantly safer than using a utility knife.

#40198 HPRET1 Hinge Pin Retaining Collar has a range of 7/32-9/32” so the 8/32” (1/4”) pin will work with the HPRET1

It is a 90 degree Templet. They come in various sizes. There are specific sizes with corresponding item codes/ordering numbers on Flexco.com

You can not adjust the depth of the cut. It cuts the entire thickness of the belt.

Thank you for your inquiry. Please contact your local Flexco distributor directly for pricing/ordering information. A current list of distributors can be searched locally at www.flexco.com

Flexco hammers are awesome. I love mine <3

Thank you for your inquiry. Please contact your local Flexco distributor directly for pricing/ordering information. A current list of distributors can be located at www.flexco.com

Flexco does not sell directly to customers. Please contact your local Flexco distributor directly for pricing/ordering information. A current list of distributors can be located at www.flexco.com

Flexco does not sell directly to customers. Please contact your local Flexco distributor directly for pricing/ordering information. A current list of distributors can be located at www.flexco.com

Flexco does not sell directly to customers. Please contact your local Flexco distributor directly for pricing/ordering information. A current list of distributors can be located at www.flexco.com

Hello thank you for your inquiry. Without knowing the thickness of the material you are working with it is hard for us to give you a definitive answer. Our sell sheet and IOM documents can provide additional information. We would be happy to test a sample piece (12" X. 12" min.). Please send an email to info@flexco.com for further inquiries.

No, it is only intended for installation use with the Flexco SR Rivet Hinged Fastening System.

@@FlexcoTube but can it be done?

For safety reasons Flexco does not promote skiving a belt by hand. For better results and for your safety consider the FSK Belt skiver: www.flexco.com/EN/Product-Systems/Belt-Maintenance-Tools/FSKsupsup-Belt-Skiver.htm

@@FlexcoTube Well I am learning how to splice and thus, i am not interested in buying such a specialized product, my old man is a splicer with rema, and I always wear gloves whenever using knives, Could you please send a manual on the topic. Have a nice day.