Видео

Bon courage mon frère.....l'avenir sera meilleur 🎉

Имени Дамазди мана мен чикараман хакики Декон боламан кучадан келиб мен чикараман

Formidable et surtout beaucoup de courage 😊

Voici les codes pour ce tutoriel👉👉👉👉👉👉👉👉👉👉👉👉👉👉👉👉👉👉 👇👇👇 #include <SPI.h> #include <MFRC522.h> #include <LiquidCrystal.h> #define RST_PIN 9 // Configurable, see typical pin layout above #define SS_PIN 10 // Configurable, see typical pin layout above MFRC522 mfrc522(SS_PIN, RST_PIN); // Create MFRC522 instance byte accessUID[4] = {0xC1, 0x28, 0xB8, 0x89}; LiquidCrystal lcd(8,7,5,4,3,2); void setup() { lcd.begin(16,2); lcd.setCursor(0,0); lcd.clear(); Serial.begin(9600); // Initialize serial communications with the PC while (!Serial); // Do nothing if no serial port is opened (added for Arduinos based on ATMEGA32U4) SPI.begin(); // Init SPI bus mfrc522.PCD_Init(); // Init MFRC522 delay(4); // Optional delay. Some board do need more time after init to be ready, see Readme mfrc522.PCD_DumpVersionToSerial(); // Show details of PCD - MFRC522 Card Reader details Serial.println(F("Scan PICC to see UID, SAK, type, and data blocks...")); } void loop() { // Reset the loop if no new card present on the sensor/reader. This saves the entire process when idle. if ( ! mfrc522.PICC_IsNewCardPresent()) { return; } // Select one of the cards if ( ! mfrc522.PICC_ReadCardSerial()) { return; } // Dump debug info about the card; PICC_HaltA() is automatically called if(mfrc522.uid.uidByte[0] == accessUID[0] && mfrc522.uid.uidByte[1] == accessUID[1]&& mfrc522.uid.uidByte[2] == accessUID[2] && mfrc522.uid.uidByte[3] == accessUID[3]){ lcd.setCursor(0,0); lcd.print("Porte Ouverte"); delay(5500); lcd.clear(); }else{ lcd.setCursor(0,0); lcd.print("Porte Fermee"); delay(5500); lcd.clear(); } mfrc522.PICC_HaltA(); } je vous remercie😊 abonnez-vous👉👉👉 @amadouneoumar9570 ❤❤❤