Видео

Hello, I have a 12v3000 inverter. When I input 12volt, I get 230volt output. When I connect a load to the output, I experience a power cut. What could be the reason for this? I would be glad if you can help me. Good work.

thank you

Hi, i'm not a technician, but i'm currently dealing with an Aspire E5-575G with the same drmos shorted. I guess it is an hopeless job, since in my case (and probably in yours too) the drmos shorted at the output and fried the cpu with no less than 19V (or 15V on battery i guess), but i will give it a try anyway. Thank you for sharing the info, it's the only video about this particular component on youtube. One more sub for you and greetings from Italy. :)

I have the exact same Xbox

my egl keeps crushing and restarting at windows startup repair

My master knob doesn’t work. I can only control volumes from gain knobs. How can I fix it? Thank u

lol no

My advice to you is to buy a better microphone instead of this junk...

Li ion rechargeable for $2 is still better than normal battery for same because i can recharge it. Yes it has self discharge around 1,5 month

Witam! Swietna cena. Dzieki za recke. Czyli jak dobrze rozumiem, gdy wylaczysz OCP i OVP mozesz robic voltage injection? Czy tak? Chodzi mi oto, ze jak mam zwarcie, to czy moge sprawdzic kamera albo alkoholem gdzie dokladnie ono wystepuje. Dzieki z gory za Twoj czas!

Hello, I have a jbl boom box 2 but after a power failure it won't turn on, what do you think it is?

Hello, I have the same speaker model, after a power failure it doesn't start, what do you think it is?

New to your channel 😊

Can i use that as fish stunner for invacive eel

Hey i have a partybox 200, when i plug it in, power light turns on for about 3 seconds and then shuts off, no power after that until i unplug the power cable and plug it back it, then will do the same thing again.. any recommendations? Thank you!

FUI THANKS the switching power supply replaced with and old 19v laptop power supply worked 👍

What capacity has that capacitor? Do u remember?

Where are you located ?

Good luck!

I had MacBook Pro 2009, Treid to install Ubuntu use refus many times but does not work. Why?

Where can I get a new😂driver from please

Where do you plug the power cord into the tv

Hi, can you advise? I have a Toshiba 65U6863DB. Left side of the screen is darker but you can still see picture. Will back light need replacement or main board or power board?

The 18v lug is output, not input. Output lugs on the outside, the input lug is near the central capacitor.

I have the same problem same model tv the red light on the bottom blinks twice before it restarts again if I open the tv with my dad I might need your help 😂

U should be a Muslim, I don't know why I am telling you that but something told me to say it

That made it kind ez

comprend rien son pas bon ni fort...désolé

Boss man, get a decent camera going and youll be set!

I dont suppose you have the schematics still, Im trying to diagnose a fault with the rear camera trigger input on this exact model

I have a EGL Windows 10 Laptop, since resetting I have lost the audio drivers, any idea how to reinstate them? I have looked forever on the internet

If the cap had a dead short or if you touched the probes together , the meter will read good cap with low esr, my does, and it refuses to go back to the OL screen display. I think think it may have something to do with the firmware.

What is the screw driver size

I have the ToolTop version of this thermal imager, exact same spec just different colour. Super useful and really well made to Ui-T build standards I would say. Mine cost under £120 when on sale offer a few weeks back.

Hola quise buscar el documento donde tienes las mediciones de la placa pero los link que tienes no muestra nada !!

Can't hear you

Thanks

❤

I have the same device on my car and it stops after 10 minutes, even if the engine is running. Do you know what the cause would be?

Any chance I can bypass the standby and force it to keep it on? Thanks

Hello…having an issue with my Partybox 100, works perfectly when plugged in but instantly switches off when unplugged battery gauge shows full but can’t turn on without it being plugged….any solution on this?

Hi there, I recently bought the thermal imager. However, whenever I connect it to my PC, the software installer is detected as a virus, and my PC deletes the installer program. Now I've lost access to the software. Could you kindly share the software with me?

Helo I recently come across your RUclips channel and was impressed by the quality of your content. How ever after conducing a comprehensive. Noticed there is room for improvement for RUclips channel forgetting more visitors and subscribers # Your Thumbnail needs to be more eye-catchy. # Your video title . meta description needs to be improved. # Your need to use more relevant tags and keywords. If you want i can do a free work about for your better understanding . King Regards.

I have one of these on the bench right now and the problem is definitely on that little switch mode standby supply. The diagnostic method you have used is completely wrong. The on board fuse is open, but not because there is any primary-side short. You can read a short on the secondary side, and I'm pretty sure that the problem is one of the two secondary-side Schottky rectifier diodes. I ran out of time today to check further, but tomorrow, I will pull it to check it out of circuit

Hey i have a question my boombox just stopped working one day no light no anything no charging so i bought a replacement battery and charged fully i did notice that when the last light i think is the 5th one never came solid it always stayed blinking so i unplugged the charger and it said it was full ok i started playing the boombox when it was by 2 lights it turned off and i went to charge and a single red light was flashing but it wont charge it just stays 1 red light flashing any ideas ?🙏

good work. keep it up

Hi there, one question about your microscope cammera, is that the same model that you made reveiw video 2 years ago? You purchased it in 2021 so I am wondering if it still makes a good use? Thanks

I've closed this booking, my postman have confirmed that the TV is still working OK. So, let's hope it will stay this way. :)

Can't beat Aliexpress for the cheapo tools. I get my tweezers there for jobs where I don't want to 'risk' my Engineer ones, they are pretty much disposable for the price.

For what it is, it seemed to work OK to me. Is it the best? No. But it is a fraction of the price.