Видео

I was searching around to see if anyone would talk about the gearing. I just bought one with 4.10's and I'll be in overdrive at 75 running 2800 rpm's on the stock tire size 245 LOL. I will probably put some bigger tires on it and see what happens. What size tire can you fit on this with minimal rubbing on stock ride height?

Appreciate the tips. I will be in the market in the near future, will keep your tips in mind.

What are you doing for a ebrake

What truss kit are you using for the 9"

Hows this setup? In building the exact setup but i have the drums

I would also consider a 3rd garage door, so u can just drive through without all the backing up.

Hey where are you? I can use a 2nd row bench! Do you still have it?

Thanks for the video bro!

What’s the lift/suspension setup?

I mow a steep hill with mine and as long as its dry it climbs easily

I used to have a f935 for over 20 years but a couple years ago we upgraded to a 997 zero turn and sold the f935 but just recently I picked up a f910 for 250$ with deck and whole bagging system alll intact but it definitely doesn’t have the same power as the f935 but still is so much easier to go under trees then a zero turn

The yukon xl 2500 is my dream car. Im saving up to buy one next year! Great video.

That looks terrifying.

I got a FREE John Deere F620 WOW it is outstanding. I just had to replace a few safety switches. I have owned BIG John Deere tractors for decades but this is my first small mower. I must say over the years my John Deeres have stood the test of Time. I have a 4x4 2040 and a 2030 and an old model 40 ( I run an old baler with it) But never had one of their small mowers its fantastic !!!!

We use to do it on 31s back in the 80s lol.

Broom finish is much safer than a polished. I agree, a light broom finish is best.

Got mine (F935)76" swept spindle for free. The worst mower ever made, everything was so under engineered. Fixed mine with non JD parts, now one of the best mowers, I'll never sell it. Ps mine came with differential lock lever on front of trans axle, simple foot linkage to make functional . Also second hydraulic spool under right fender. I'm working to make light duty front loader. Good luck 🤞

Knocker rocker?

mine eats belts...how about you

Just ordered after watching your video but it came with zero bolts or anything for mounting on frame . Any idea where I can get the hardware ?

I have a 30x30 from the same company. They're just a couple miles from my house. I opted for their roof insulated. Front 10x10 rollup and 7x6 back. The slab was finished polished concrete. I etched it and sealed clear. I also want a lean to. Overall that did a great job with the building. I'm running my own electricity.

Hey Im a Quirky guy too. Ive got an old sweetheart F935 with a 72-inch cut as well. I would like to find a steering cylinder for mine if you know of a parts source. I was told the original one can be serviced and rebuilt. That remains to be seen. We both agree that the unit is not trouble free but it is a certified badass.

I have a f 725 got in 2022 $700. Best mower I ever had..

I have an old jd f725 gas engine mower that I absolutely love I paid $400. For it and used it for 7 years then the engine finally died. It’s a liquid cooled Kawasaki twin cylinder gas. I’m wondering if I can replace it with an air cooled one. I love the front mounted deck because I have so many trees and bushes to mow around and it eliminates most all weed whacking and it’s so well balanced with the axel in the middle it can hold a steep grade sideways without acting like you’re driving a shopping cart, lol.

I have an old jd f725 gas engine mower that I absolutely love I paid $400. For it and used it for 7 years then the engine finally died. It’s a liquid cooled Kawasaki twin cylinder gas. I’m wondering if I can replace it with an air cooled one. I love the front mounted deck because I have so many trees and bushes to mow around and it eliminates most all weed whacking and it’s so well balanced with the axel in the middle it can hold a steep grade sideways without acting like you’re driving a shopping cart, lol.

I did this on my Cj7 and it took a lot longer than I thought it would. Trimming the hood to the proper clearance took a while. The entire time I’m thinking (I hope I don’t jack this up).

You can just get bigger tires!!

Where you been man?

I had an 89 with 3rd row seating, rear air, and brushed aluminum. Now I have an 85 with brushed aluminum, no stamped rear seat mounts, and no rear air

After having them for awhile, what is your long term thoughts on them? - I have a LJ with the same hood/fender setup that I did a LS swap on. Had to remove the hood catch as well. I purchased the same hood pin setup .

great video, i enjoyed the hell out of it

Very nice video and mower👍👍 I really want to get a johndeere like this my farm. Can you tell me please how much costed yours? I am from europe and they are pretty rare, i found a johndeere f525 for 1550 euros

Looks like you made a great memory with your daughter!

I’m with ya on switching out my bench to Captains for the second row and pull out the 3rd seat. I’m on the search for the seats now. Thank you.. Kev

Totally dug your video. 👌🏾

Love the new green and white license plate!

Pretty rusty... I approve of this purchase!

30 X 40 X 14 vertical You’re spot on. (6) windows Two front two on each side leaving back wall for a mezzanine thus the fourteen ft. height. Double bubble insulat. After market 9 light entry door. (Lowes) 12’ X 12’ hoist type door. $23k Alan’s Installed last fall. *This is not advised however, this is building number two and I excavated myself using a builders level installed cap block pier’s on 5’ centre’s compacted levelled crush/run base prior to having buildings set. Also note I purchased a plated compactor from Harbor Freight $600 and compacted to my heart’s content. I found this cheaper than rent due to being able to trade off to my concrete contractor for some of the labor. With both buildings setting on 3.5” solid cap block I had poured a 5.5” thick 4000 PSI slab steel reinforced using hog fencing from Tractor Supply. This is heavy actually cheaper and puts regular concrete wire to shame. An extra pour of 6 additional inches base where a lift will live. We love the outcome and Alan’s was good to work with. WARNING! Any modifications to the metal structure voids the warranty. In other words I now have no warranty according to the individual representing the builder because I choose to be responsible for installing my own entry door. So be because the builder doors are simply trash. I know I did install the factory door on my first metal building. Good luck to everyone and as far as I’m concerned these buildings are the best bang for the buck if done right. My buildings passed all local requirements upon their completion. Do your own due diligence. Good luck out there… Jerry

Bleesings

When the tornadoes rip ot out you can do it right

Commercial steel doors

Love the individual seats for the kiddos but you still have room for a few extra passengers in the 3rd row!

It’s a metal building.

That blue is mint

Wow, lucky man. Long way from home.

Super cool! Didnt bring your rig?

HAHA

And here I thought you'd need it on 40s...😂

Beautiful tow rig!! Very capable for what you need it for. Congratulations.