![EL PIPIRIPAO](/img/default-banner.jpg)
- Видео 11
- Просмотров 19 053
EL PIPIRIPAO
Добавлен 3 сен 2012
Yea
DALLAS COWBOYS VINTAGE WATCH WITH CUSTOM OLD FOOTBALL LEATHER STITCHLESS STRAP.
Hello, this is my 1973 vintage Dallas cowboys watch made by Lafayette watch com. Swiss made. Visioned my watch would look nice with a strap made out of old football leather and boy was I right. This is not a how to do video. I'm no leather maker. Just doing this as a hobby. Decided to video and share how I made mine. There is defiantly room for improvement. I hope you enjoy.
Просмотров: 98
Видео
1940'S L&R MASTER WATCH CLEANING MACHINE RESTORATION
Просмотров 3,7 тыс.Год назад
I decided to do this restoration because I have a passion for vintage watches. Been restoring watches for a year now and I really needed a watch cleaning machine. Eventually found one cheap enough on ebay and of course in dear need of restoration. So decided to tackle the project. hope you enjoy! DANGER Do not attempt to restore if you don't have knowledge or feel unsafe to work with electrical...
NICKEL ELECTROPLATING CITIZEN MILITARY WATCH CASE AND CROWN
Просмотров 1,1 тыс.2 года назад
THIS IS MY FIRST ATTEMPT TO NICKLE PLATE A WATCH CASE. CAME OUT NICELY.
Storm water sediment runoff. Pharr , Tx.
Просмотров 423 года назад
This video is to inform EPA about possible wildlife contamination due to agriculture land and sediment that can clog up storm water inlets. Ultimately agency enforcing a sediment filtration system.
PHARR TX FLOODINGS VERACRUZ DRIVE "HURRICANE HANA"
Просмотров 5514 года назад
THIS VIDEO WAS CREATED TO SHOW AND INFORM OUR CITY ABOUT OUR TROUBLES, THIS IS A RECURRING EVENT THAT IMPACTS OUR HOMES. HANA HURRICANE STREET AFTERMATH.
How to make a raised bed garden project
Просмотров 324 года назад
So my wife wants to start growing vegetables. Nothing better than youtube university. I was watching diy videos and ended up going for it. I decided to follow James video of how to do raised beds. So here is what I did thanks to him. I hope you enjoy. If interested in deep detail of how to make a raised bed check out James channel wich is at the end of the video. Thank you
CUSTOMER REVIEW Atv Honda ES bolt-on Hand OR Foot shifter.250,350,450,500 Electric shift
Просмотров 1,7 тыс.5 лет назад
Bought this shifter due to ES problems for a 2003 trx350fe. I decided to do this video because I couldn't see no other video from a customer review. After making my purchase I started to read all the negative comments from original videos about the ES bolt on shifters of past purchases that others never received their product. I was nervous about my purchased not arriving but thank fully I did ...
Pro debut Luis Castro "luisito" 14sec k/0
Просмотров 2,8 тыс.11 лет назад
Luis Castro first pro fight and next up coming boxing star
El quinquis huapango con la harmonica
Просмотров 5 тыс.11 лет назад
Aquí el quinquis echándole buena melodía con su armónica nueva
Do you have a link for hardware and wiring?
@@jalol190 Unfortunately I don't have .
@@el22chris where did you purchase them?
@@jalol190 Most I bought from Amazon and some from eBay.
Do you know the size of the wire?
@@jalol190 14 gauge. If you need more info about the hardware refer to "watch as i learn" channel that i show in the video. He there shows more info as to what to buy.
Good job 👏
@@williamking6019 Thank you!
Do you have the basket?
Show muito bom mesmo para bem
Thank you
Sorry can’t stand ai voice. I’ll skip
😅
Hi! Thank you very much for this wonderful video. May I know how did you manage to remove the rotor from the motor housing? I can’t pull it out. It seems attached to the bearing inside?
Hello Joel, thanks 👍. I also ran through that same wall 😂. It might not be the proper way to do so but I was left with no option though it worked for me. I grabbed the housing and the shaft tightly, then I slightly wiggled the shaft while pulling all by hand and carefully. You don't want to break the housing bearing slot. Indeed it's attached to a bearing which in my case the bearing came out attached with the shaft. It was tough but managed to feel it wiggle out a bit then it started to come out smoothly with some extra slight wiggle. I hope you find this useful.
@@el22christhank you much!
@@joelcarvajal let me know if you got it out successfully and if you did it differently. Thanks.
Jijiji.
have to build my own watch cleaning machine , as much as i am in love with vintage cleaning machines the prices even for total junk is so so so over inflated it's not even funny ,, Great Video btw clean with pride !!!!
Right on!
I have a question I with these machines. Are they ok to use for cleaning jewellery as well? With the correct chemicals I couldn’t see why it couldn’t be used for that too.
I know that jewelry works very well with an ultrasonic cleaner and also watch parts. When it comes between ultrasonic cleaning and watch cleaning machines, I've heard the cleaning machine works even better than the ultrasonic for watch parts. I can't say the same for jewelry but I assume it also does a good job.
@@el22chris see that’s my question as I’m restoring a watch cleaning machine I just thought about it and now pounded the question. Don’t get me wrong when I’m done I can find out that way but wondered if anyone knew.
I just bought a barn find and plan to do something similar. Great work!
Sweet.
Great job, congratulations. Could you tell me how many rpm the engine runs? Thank you
Take pictures before disassembly. Many pictures.
Wd40 was originally created as a water proofer for electrical components.
Good to know, that's probably why it worked without issues.
Great video! I really enjoyed watching you work. I also liked how you personalized your machine by changing the color, very nice touch! Thanks so much for the shout out! It’s much appreciated.
Thanks alot for letting me participate and work on your project. It was very interesting in finding out what the machine is used for I had no idea when you brought me the piece. Thanks alot🙏
😂 Thank you too!
Curious about how you wired the 3-way switch to reverse the motor. My L&R Master (seemingly the same model as yours) just arrived yesterday and I would like to have that option as well. Fantastic job on the restoration, my friend.
Thanks! There are 3 connectors on the 3 way switch. The connector in the middle is connected with the hot powered line that comes from the light bulb. The other two connectors (black and white wires doesn't really matter one wire will spin left or right) will be connected to any of the two that comes from the motor head. Just as a reference, your machine may have different wire colors than mine and if that's the case, the third wire (mine is green) that comes from the motor head will connect to the speed knob connector. I hope that explains and helps you.
Bendiciones muy bien saludos 👍👍😘🙏
Igualmente, saludos
Can you please explain the heated electro cleaning part?
Having the same issues what's the fix new turbocharger?
Nice work! You have a cool setup!
Thanks for the visit
This is pretty common, this is what catch cans are for.
COOL !!!
thxs
That’s amazing brother!!!
thanks bro
Dios te bendiga hoy y siempre un nuevo comienzo saludos 👍👍👏👏
igualmente Dios la bendiga siempre!
Awesome comander 👏👏👏
Con un ventanazo se avento
Only the choosen one who can fix this problem... Nice job mi amigo
It’s happens just put Oil catch can and you are ok
Wow
Glad I didn't spend 70 bucks for one on ebay ...
se la rifo compa
Freddy Mercury
si le gana al mnem en hablar
Gracias Cristóbal por alzar la voz y representarnos👍
that is whrn my dougter was born
i cant belive you made a youtube chanle
awwwwww
papi te amo
I bought same thing and it was trash didn’t even send the right thing 😂I’m now putting foot shift parts in my es to convert it
no me gusta como cantas mejorale
so what was the outcome? mine shut down yesturday and oil was pouring out of the air filter, no weird noises out of the engine or turbo, it did start up again but would shut down after a minute or so, (maybe low on oil shuts it down)
TIred of your ES model not shifting again. We manufacture bolt on hand and foot shifters for these models. These shifters are available for order at Hondaesshifter.com. Our new number is (601) 678-9101 or (601) 513-6554. Happy Riding
Sopla le quiquis❗️
Did this get resolved ?
@el22chris any recent news on your x3? Bought mine 3 weeks ago and it's doing the same thing. Dealer tried a "bag test" and couldnt locate the leak. Said it must have been a fluke. I took it out yesterday and of course same thing happened again. They said they had never heard of it.
If anyone else has same issue, mine turned out to be the camshaft had a defect. Not sure how it made if from the camshaft to the air intake but the dealer said thats what it is and they BRP has sent a new one. So I will end up without my machine for 3 weeks total.
Hey man. Any luck. My maverick has been in almost six weeks now??
K la bajee pokito es para los dos lados el aire c escucha bien pero más bien para los dos kadis
Did u ever find out what the issue causing this was?? Mine is also doing it. Oil levels are and air filter is drained in oil.
Dude my unit has been in the shop almost three months now. They have not yet found the problem. Dealer is waiting on canam trouble shooting steps. All of the past trouble shooting has failed to stop leaking. I'll update whenever they find the issue.
el22chris I’m out of the warranty period but I did get the 4 year extension on it. I also explained that if my engine was running on low oil that future engine failure should also be covered by them.
@@eleazarsantana2575 yes it covered and they went ahead and did fix the issue. It was a seal problem . Can't remember what gasket it was but as soon as I get the info again I'll post.
so i guess this only happens wen u flip a utv and it says if your turbo is spinning to just leave it running till it burns the oil