Видео

I'm interested in how much the price is for a 22 caliber

That shit leaks like crazy. You need teflon sealant tape and even washes between the parts.

It's for air Force guns more than anything imo

Like to see a backpack version of the small one

Got one otw for my huben GK1 and K1 in .253!! Gonna get one for my western rattler .357!! Be throwing lead

I have a great white tank , and it seems that this regulator will quick connect directly to the tank, without an extra hose. So, is it ok to snap the regulator right onto my tank quick disconnect? I dont see why this should be an issue, as long as I don't knock the tank over.

Where are the grouping tests

If a tank fails, does it explode or just develop a crack and quickly lose pressure?

What pcp are you shooting? I’d like to get out that far. Just starting into the pcp

Are there any breathable air compressors a single person can actually lift safely?

You saved me much time, money, and aggravation, friend. A like and sub is the least I can do. Newb to pcp here

We gave almost 7k for our compressor setup t the fire department. I just use it for free since I'm the only person that knows how to fill our SCBAs.

Nice vid. I would add that tethering shouldn't be done on any PCP for which there is a fill probe which is NOT permanently (or securely fixed) fixed to the air tank because there is always a danger of the fill probe coming out should it be bumped when under pressure. Should the line be dislodged, this of course will definitely lead to the loss of much air (dependent upon how quick one reacts to turning off the tank valve) and possible damaged incurred to the shooter from the escaping high pressure air or worse still the line coming completely detached and a high pressure line with fill probe whipping wildly about and causing physical injury. How do I know? I've seen it happen. No one was injured but there was quite a bit of adrenalin flowing through those veins of that shooter for the next 30 minutes.

Greetings guys! I kindly ask you to help me copy this mold...since I own a FX Maverick and now I have problems with bullets since there is a war in a neighboring country...I need drawings, dimensions...I want to try to copy. ..Sincerely

Apollo is hatans budget pellets

Looks like there is some sprue around the base of the slug when it comes out of the die, is this true and how is it removed?

I’m new to this but it’s confusing. My understanding scuba tanks are cheaper because they are heavier and they have a lower capacity? My PCP rifle has a 250 bars/500 cc bottle attached to it. I asked someone else about using a small scuba to keep in my backpack for portability and average scuba tank for my car and he said the maximum average of an air tank is 3000 psi so this will not fully refill your airgun as you will be short of a full refill and as you keep refilling it, you will get less and less air into your airgun. If I can get more than one fill from a scuba tank, why won’t it fill my PCP gun fully the first time and less and less the more times you refill your PCP Gun? I have enclosed what he wrote before. This is the part I don’t understand. Simply put, How many times can I refill my gun with a small portable scuba tank and how many refills with a normal sized scuba tank?

The size of the gauge needs to be increased at least 2x. It would drive me crazy trying to get a quick reading, much less dial in a pressure precisely.

Hello, good evening, I am from Mexico and I watch your videos and I would like to ask you where I buy your press to make hojibas or if you sell them and if you ship to Mexico or California, where can I buy the machine to make hojibas?

Excuse me, I have a question, where do I have to take my scba tank for a test?

Thank for the video Any links where to get those mold please 🙏

I put a male connector onto my fill probe for my hatsan bullmaster and for my m3 I also put a male on the back on the female connector,but when I stop filling and release the pressure I cannot disconnect from the guns as there is still pressure contained. Am I doing something wrong?

I just wanted to chime in and report for anybody on the fence about one of these; they are awesome. 100 cu in tank with a Scba valve fits snugly with a little room in length to spare.

Looks like it makes a good fidget spinner also

Hello, where can I buy such equipment for 7.62 mm 30 caliber bullets?

Cek harga cetakan sluq

Thank you for your time and info,,

Both great companies, great people to do business with. I love my Alkin Compressor, and i couldn't play the game without all the plumbing from Air Tanks Plus.

I need to 177 slug pallet dais

Born on date? Wrong. Its an "in service" date and "tanks" are NOT "rated" or "certified" OR properly "tested" via "hydro testing" of a "tank" that is manufactured as a GAS "tank". Oxygen tanks, propane tanks, anhydrous ammonia tanks are LIQUID TANKS and are "hydro tested" to VAPOR PRESSURE. Scuba tank "psi" is NOT "vapor pressure" and only IDIOTS use "air" in paintball "markers" as a "cheap alternative" to CO2.

How much?

We would like to see a smaller version to pump tanks up !

LOLOL I need one

i need your advice and probably to do buisness with you. i have a fire extinguisher from the 1990's that was filled once and then the pressure was dumped once. i emptied the powder and removed the valve and handle so there is only the tank remaining. it ia aprox18inches tall and aprox 6 to 7 inches diameter. the threaded opening is aprox 1.5inches across. (it is a fire extinguisher) need advice on what is going to be needed to convert it into a 4500 psi pcp filling tank magnet does not stick to tank but it is heavier than aluminum so i am guessing stainless steel. ap if you have a phone number we can talk and i can send a pic by text. and yes i would trust this tank with 4500psi. yup i have had this tank the whole time so i know it has not had any excessive wear or tear. and it is very strong feeling. thanks

]l0trry

Amigo necesito un molde de esos 6.35 para si me puede hacer favor véndemelo porque por acá no encuentro ese número de diablito y estoy muy lejos para ir a comprar

Apolo Premium Destroyer Copper Heavy 5.5mm i order 3 backs this bullet

I have the same press but to buy the lead from Corbin the shipping is almost the same cost of the lead.I found that RotoMetal sells the wire in 25lb. rolls 99.9% pure lead and if you buy enough the shipping is free. I cuts the price to make slug down considerable if you have no way to make the blanks. Pass it on to anyone that make slugs.

How can i find to buy the slug form

👍👌

How much the press swaging

These airgun slugs look great but accuracy is something left to be desired. I always wanted to purchase Master Caster to cast cores for my .224 swaged bullets and automate it. What kind of spread are you seeing in the core weight? The goal is to produce them within 0.1gr so I don't have to sort them.

How's the accuracy on these swaged slugs? What caliber and weight?

What airgun is that looks sweet

Thank you so much for this video. I have tried regular plumbers Teflon tape on my foster fittings and they always seem to leak. I just removed a fitting from a pony bottle that had been on there for years and was just beginning to leak. I found that the tape was black and I'm assuming now it was PTFE tape.

Nice!! Where did you get that shooting bench from?

Nice video Roger!! Where can I get a modified AirForce Condor? Are the mod parts available to the public or did you fabricate your own parts? I'm interested in the .22 or .25 cal. Thank you.

Nice broader 👍👍👍

Can you use this on a 100 cf 3442 psi steel tank as well

Ciao complimenti per il video ...dove posso trovare questa pressa online? Mi può dare un link?? Grazie