Видео

Green

👍👍👍👍👍👍👍✌️

Well done 🙌

Nice! What would be the average amperage to tig weld this?

Fronius is one of the best welders I ha e used, I can't remember the model I think it was 4000 something, it was a synergic mig/mag, mma, tig water cooled. The biggest advantage of this welder was 500Hz setting allowing perfect setting and amazing arc.

I learned a lot !

This is by far the best oxy-propane cutting video I’ve found so far, I also found your website earlier whilst doing a google search. So many other videos are just giving bad advice from people who are used to acetylene rather than propane. Also, despite English not being your first language, you are very easy to understand. I recently bought a miniature cutting head for my small oxy-propane torch, but it had no instructions, not even a guide to the correct gas pressures. I managed to find some pressure guidance, but this video has helped me with the rest of the information I needed to know. Thanks very much for taking the time to explain all this so thoroughly.

Дакую буду пробувати!!!

great video!

Thanks for you effort in producing some in depth explanations. I learned a lot. This is the only in depth explanation of oxy propane cutting that I have found.

It’s great to see a craftsman enjoying his work?? Keep the vids coming assume thanks .

Є декілька питань. ))))) яка кераміка і чи є там газова лінза. А якщо з присадки є тільки 4043 1.6 діаметр

Так ліпше коли відкалібровані

I must say an absolutely wonderful video, Filled with great information , I've been welding for a number of years and it's always nice to see other people's techniques and learn from them. Very, very informative video I will definitely be watching others of yours. Thanks for the information and your time be safe and take care. I've been welding for a number of years and it's always nice to see other people's techniques and learn from them. Very, very informative video I will definitely be watching others of yours. Thanks for the information and your time be safe and take care.

Nothing fancy that’s a really nice weld

Якщо вам треба просто заточити швиденько свердло, то це відео не про те))

I've had this experience twice owning a BMW 328 and 335 it seems that every time I get new tires I tell the tire shop be careful but it always seems to start leaking air after tire change.

Nice job ! Can you share manuals/technical datas with me please ? I’m also disassembling my 2.5 bjk from a 2006 Crafter Thanks 👍

+

Молодец никого не слушай правильно робыш. Я теж власнык Кравтера дизель 2.0 2016 года мае 450000 км масло не бере не дымит пока ежу

Цікаво)🇺🇦✋

Has anyone tried a repair with a spoolgun or mig

Ótimo video muito bom gostaria de um do uso da tocha de aquecimento usada neste video para aquecimento da peça do trator quero comprar uma da HARRIS .

Great video, thank you!

Im Germany are you

Цікаво

great technique ,, what rods do you use ?

Excellent, detailed presentation. Thank you.

once something is broken , it's broken . if you break a bone , it may heal but it's never as good as it was before it broke and never will be . a repair is hit or miss that's why it's called a repair , not a fix . it's only a fix if it lasts . if it doesn't last you simply have to keep repairing it til it can't be repaired anymore .

one thing he says about drilling a hole at the end of a crack IS NOT necessary. . . . ITS VERY NECESSARY. Cracks travel so you grind out beyond the crack about an inch or slightly more to the drilled hole then weld it all up . And remember it's not the weld that fails , it's the material around the weld . Welding may seal a crack or mend two pieces together but the material in general in the welded area is weakened . Expansion and contraction is a b*tch and it happens to ALL metals .

Я думаю, що все залежить від заточки свердла, марки металу (ст.3, чи 45, чи 40х), це все чорний метал ☝️, ну і звісно від режиму різання.

Sprinters rust from inside out

I have one and seem to have all the problems you mentioned. Plus now mine doesn't always switch from grinding mode to weld mode and i get flashed. When it was newer and worked better i did like it for production welding, where i was set up to just weld for hours and not have to remove my helmet. But now because it doesn't always switch from grinding to welding mode i tend to just use it for when iam using the cutting torch.

Good honest review.

Excellent review, and the format is very well done.

Is there such thing as soldering a wheel crack?

very best teacher Bravos

Can I send u my rim?

I've been doing this for 20 years now you are the only person I've seen that does this roughly the same way I do the only thing I do different than you is I don't use the cutoff wheel to cut the v in and I don't the back first I bur the front out then weld it open root but yeah I do not stop drill I think that is a waste of time I keyhole the end of the crack and weld it out from there

How much do you charge to fix a crack like this u are doing now

Класне відео. Гарно дякую за інформацію тимбільше українською. Продовжуйте

Did a lot of paint bind to the floor of your garage?

very informative thank you

Im sure the designers know very well how bad the design is, its probably deliberate. I don't think vehicle manufacturers want them to last to long.

The main reason spokes are on the outer edge of the wheel is because the closer you can move the steering knuckles to the center of the wheel (which means the brakes also move outward), the better the suspension can perform. This is especially true when talking about torque steer in a front wheel drive (the steering pulling one direction or the other under hard acceleration).

I actually liked the first better but the green is probably the most realistic...

Great video! Good camera worm and the voice over is spot on. Thanks from across rhe pod!

This has to be one of the most therapeutic films I have watched. Brings back a lot of memories, from when I used to restore cars. I loved working on rusty motors! Great series of films!

nice vid , keep up the good work

Як з Вами зв'язатися?