Видео

Email us so we can help you out with this.

If you have a radio case, the retention lanyard goes over the channel selector knob if you choose to engage it. Many folks don't use it at all but it is there if you want it.

Email us for CS help, we'll need to determine what version you have and get you squared away

Release some of the retention via the side screws, email us if you have issues

@ thank you, I have done that before my original post. It was still to tight. I took the screws completely out and that made it better but not very secure

Same issue here. No way to get a flathead on the post on the mag pouch

The retention screw is on the face of the standard cuff case. If you need further email us and we can help.

We've not run across any Fox cans that do not fit the Mark 2 case, there's a possibility you have one from a batch that didn't meet the size standards.

Can't track any emails from you but the website lists the P5500 case as compatible with the XG-15 - so Yes, it is confirmed.

@zero9holsters166 Okay thank you. I was 99% certain that it did and have ordered it. Thanks again!

This video covers the most frequently asked questions - if you have a question not answered here feel free to ask and we can help you out - thanks.

Really? So not much interest huh? I don't want to have to ask questions. I want you to sell the product to me. .This is the first impression of this product for me and probably a few (¿thousand?) others. Basically, all you did was show the product to me. For example, you never mentioned what the product is made of. It could be compacted fecal matter covered with plasti dip. I would need to dig deeper or ask you a question to get the knowledge. Why bother wasting both of our time making a video that only answers the faq that cater to the people who already decided to return the product? They're already a lil jaded and may never see this video. I'm a fresh fish that you are letting get away because after I commented here, I went and found a product that fits my need and I didn't have to work to get the info. If you want me to go that route, why not send me all the stuff along with the info. I'll ask for whatever you left out and I will make your videos from here on out. For a nominal fee of course. I'm actually being serious if you're interested. I'll do demonstrations and competitor comparisons if you like. Lmk Good luck!

Impressive, what product do you make? We’ll check it out.

Hello, is it possible to get “mark9” to Lithuania?

Model 4033 Flashlight Case/Bezel Down 1

No, you'll want the molle-loks for that. We have a video here for those as well.

There is an APX6000 case on the mannequin in the background. The XL-200 case is what the tek-lok gets attached to in the video. Each radio case is made for specific models of radios.

@@zero9holsters166 ty very much wish yall had one for the Apache A100

It's a little bungie cord for radio retention. You hook it over one of the knobs on top of your radio. For my Kenwood, the strap is on the side where the on/off volume knob is, so I hook it over that. You probably know this, but I'll say it for anybody else who is curious why a radio case needs this extra feature... The radio cases are snug enough to hold my radio even if I shake it upside down. However, radios are heavy and if that wasn't a physics problem when it's time to demonstrate how you won the state wrestling championship back in high school, then it'll be your speaker/mic wire that decides to snag and try yanking it out.

@@david24442 thank you!

The Safariland vest on the table is blue

None of our cases have tops to open. You can use a phillips head to tighten the Bezel Down series and the included hex key to tighten the retention on the Bezel Up series. Nothing to "open" and no tools to put a light in.

We have something new coming 2Q 2024 for this - for now you can use a zip tie above the molle channel to act as a stopper in a pinch

Same here. The short molle loks are not sized with ANY molle gear I have. Way too much movement

@@Krispity311same, i’m trynna figure what the new 2q 2024 new attachments methods are? nothing new has came out

The features and materials of specific cases are addressed in other videos. Thanks for stopping through.

Yes there will, working on them now - aiming for late November 23 release.

The MCH (original) fits the Modlite Case we make - the MCH DUTY fits the new Bezel Down - 3 case. We don't have any videos but there is a pic on IG of the DUTY and its case.

if you purchase a Zero9™ product, it will allow you to do the same, instant gloves!!!

www.zero9holsters.com

You still like it today?

Yes! High quality and so I ended up ordering all my gear to replace my leather holsters. Highly recommend! Wow just noticed I made the original comment two years ago. So I actually moved some stuff around my my belt today and all of it is still in really good shape after two years.

@@victormontes3499 very cool. I didn’t even think about that lol

Some agencies don't approve WMLs. Are you with DPS?

No I am not with DPS but that is my dream job