Видео

Yes, we recommend the WetSounds MC-20 www.utvstereo.com/products/wet-sounds-ws-mc20?_pos=1&_sid=f5fc7cc3d&_ss=r&variant=39282127667298

Hey, Give us a call at 480.616.2299 and one of our guys can help you out!

It will charge both batteries as long as there isn't an isolator involved.

No, you can only run a 925 in the stock location

They are IP67 rated

@@UTVStereo Thanks

Esta es nuestra versión anterior. Ya está aquí nuestra nueva versión, puedes comprar solo un lado o combinarlos. www.utvstereo.com/collections/can-am-defender-subwoofer-enclosures-utv-stereo

They are by a company called SC Wake scwake.com/

You could use our RCA OUT harness - www.utvstereo.com/products/polaris-pro-series-rzr-ride-command-front-rear-rca-output-speaker-wire-remote?_pos=1&_psq=rca&_ss=e&_v=1.0

Did you check out the instructions or the install video? Steps 7-10 show you how to attach the 90 degree mount

@@UTVStereo did you guys have to cut an Allen wrench down to tighten the top one mounting to the enclosure cause it gets tight when you get that small fender piece in there

you can just toss them

These do come with our Pro Series RideCommand Stage Kits, but if you want just the harnesses then you need to purchase separately. The Bass knob includes the Sub out so I would recommend going with Bass Knob. www.utvstereo.com/collections/pro-series-rzr-utv-stereo-amplifiers/products/polaris-pro-series-rzr-ride-command-front-rear-rca-output-speaker-wire-remote www.utvstereo.com/collections/pro-series-rzr-utv-stereo-amplifiers/products/rocker-switch-bass-knob-utvs-rkr-bass-knob

@UTVStereo thanks for the reply, but no. In the video, he was talking about a harness, 5 channel amp, and sub. He specifically talks about keeping the stock speakers but driving them with more power and also installing the sub. That should be a kit. But anyway, I've since ordered one of your "12 subs with 1k watt amp so it's too late for mine.

It only fits the Pro XP, Turbo R and Pro R models.

@@UTVStereoIs there any that could fit that model? For the rear under seats

Yes you can use this Gauge mount and the Center or Firewall Mount

Yes, we have the dash enclosure and then a rear seat enclosure. I'd recommend our 1200W Kit and you can run two Elite 10" Subs. If you wanna go crazy, you could go with 2 of our Elite Amps and run a 12" in the front and a 10" in the rear.

Here is a link to the kit with the ability to add the rear seat upgrade - www.utvstereo.com/collections/rzr-pro-series-subwoofer-kits/products/rzr-pro-series-1200w-subwoofer-kit-subwoofer-kit-utvs-pro-sub-1200-1?variant=40880174137442

sure is! Here you go! www.utvstereo.com/collections/polaris-pro-series-rzr-utv-stereo-speakers/products/polaris-pro-series-rzr-rear-speaker-bar?variant=40297768714338

it is 8AWG wire

They are 8AWG and about 6" roughly.

They don't come with any audio stock. It is all aftermarket.

Yep!

No they are designed for 6.5" only

We do not recommend epicenter to any of our kits. It is not water resistant.

You get cleaner, higher quality sound and more control out of a head unit

We are located in Mesa, AZ. Here is the link to the product - www.utvstereo.com/collections/can-am-defender-subwoofers-utv-stereo/products/copy-of-can-am-defender-dual-10-subwoofer-enclosure-utvs-def-venc-undrst

@SoCal_ check them out on our site, we have several options available. www.utvstereo.com/collections/can-am-x3-stage-kits-utv-stereo

The PMX 3 is Sirius XM ready, and lets you add a back up camera.

@@UTVStereothanks

www.utvstereo.com/collections/maverick-r-amplifiers-utv-stereo

I would recommend sticking with the Low Pro Enclosures for the X3, while these may technically fit, there is no way to secure it to the vehicle other than just the two seat bracket locations.

@UTVStereo Thanks for the response. Just trying to find enclosures with more cu. ft. I have modeled a few of the enclosures on the market in Fusion 360 to get actual cu. ft.

No they cannot be mounted in the lower position and we are not working on any enclosures for that.

Yes, you would just need your own hardware

The enclosure is not, the subwoofers are IP65 dustproof and water-resistant

@@UTVStereoso this enclosure can’t get wet? I was close to buying but if this is the case what’s the point of it if it’s meant to go on a off road machine lol

Do they sell those enclosures ? I only see the single ones. I wanna run 4 10’s as well. And where did you run the 2nd battery?

Hi Chris, that seems a bit extreme...normally there is a slight pull. I would maybe take it back to the Dealer and have them reprogram the steering for the new stereo system.

@@UTVStereo seems the bigger the magnet on the speaker the more it pulls wheel and I had some PRV 400 in there. As soon as I started the x3 the wheel would quickly move right till it hit the stops. I even tried extensive magnetic shielding to no avail. Sounded really good sitting still though. Tried recalibrating but they can only go but so far. Unfortunately I ripped out the speaker's and changed the dash panels back to original and it solved the steering problem.. I'd still like to have that set up though

Hi Santiago, if you try to charge off the jump post, it will only charge the primary battery. The jump post is only intended to jump the vehicle. If you want to charge both batteries, I recommend our Dual-Bank Battery Charger/Maintainer

@@UTVStereo Thanks. Was just looking for a way to charge them with out having to removed the seat being that is very uncomfortable to get done with the seats on.

Yes it will!

It is a rare occasion, but it is something simple that your dealer can recalibrate if it does be come a problem.

They are aluminum

look at the video those are thin sheets of plastic second .26 really highlights that @@UTVStereo

Hi Bryan, There is a Tab on the OEM Amp Plug, you would just need to push down on the tab and then pull the plug out. As for the Subwoofer, make sure none of the pins are bent, but it should fit snug.

What’s the cost on this exact kit?