- Видео 41
- Просмотров 524 256
pikey416
Добавлен 8 мар 2007
65 Mustang 347ci Holley Sniper EFI Fuel Pressure Test
All Holley brand new components, baffled tank, fuel pump and hanger, fuel lines, filter and fittings, Hyperspark ignition and Hyperspark distributor and coil, Sniper throttle body etc.
I've been having fuel pressure related issues on both Holley Sniper Systems I have installed this year. This car shows no sign or symptom of a fuel pressure issue running or driving.
I have a 69 Corvette that I am trying to finish currently that I have had all sorts of fuel pressure issues. Same setup front to back as the Mustang.
First the original fuel pump struggled to make pressure and locked up after 20 minutes. Then Holley sent the wrong application fuel pump to replace the original one that failed und...
I've been having fuel pressure related issues on both Holley Sniper Systems I have installed this year. This car shows no sign or symptom of a fuel pressure issue running or driving.
I have a 69 Corvette that I am trying to finish currently that I have had all sorts of fuel pressure issues. Same setup front to back as the Mustang.
First the original fuel pump struggled to make pressure and locked up after 20 minutes. Then Holley sent the wrong application fuel pump to replace the original one that failed und...
Просмотров: 528
Видео
Gsxr at Autoplus Raceway "Small straight line"
Просмотров 2639 лет назад
Gsxr at Autoplus Raceway "Small straight line"
Finklemire's Turbo Drag Bike in 09'
Просмотров 1869 лет назад
Turbo Drag Bike @ Gainesville Raceway 2009
Spiderman Top Fuel Drag bike @ SGMP 4-12-14
Просмотров 1,2 тыс.10 лет назад
Spiderman Top Fuel Drag bike @ SGMP 4-12-14
Seat Time @ Auto Plus Raceway Gainesville Fl
Просмотров 42910 лет назад
Seat Time @ Auto Plus Raceway Gainesville Fl
Grudge Bowl 2 Valdosta Motorcycle Drag Racing...
Просмотров 67 тыс.11 лет назад
Grudge Bowl 2 Valdosta Motorcycle Drag Racing...
Grudge Fest 10-13-12 Motorcycle Drag Racing
Просмотров 13 тыс.11 лет назад
Grudge Fest 10-13-12 Motorcycle Drag Racing
07/08 Gsxr 1K Motorcycle Clutch Replace/Install/Inspection DIY Brocks Clutch Mod
Просмотров 95 тыс.12 лет назад
07/08 Gsxr 1K Motorcycle Clutch Replace/Install/Inspection DIY Brocks Clutch Mod
Sky Diving, Drag Racing, Road Racing, Bike Racing All in One
Просмотров 31612 лет назад
Sky Diving, Drag Racing, Road Racing, Bike Racing All in One
M-Cup Motorcycle Drag Racing @ SGMP 4-14-12
Просмотров 20 тыс.12 лет назад
M-Cup Motorcycle Drag Racing @ SGMP 4-14-12
Motorcycle Drag Racing SGMP "Grudge Bowl I"
Просмотров 7 тыс.12 лет назад
Motorcycle Drag Racing SGMP "Grudge Bowl I"
Behavioral Addiction on a Suzuki Gsxr
Просмотров 86112 лет назад
Behavioral Addiction on a Suzuki Gsxr
"Liter Therapy" Suzuki Gsxr 1000 Drag Racing
Просмотров 1 тыс.13 лет назад
"Liter Therapy" Suzuki Gsxr 1000 Drag Racing
So when u order the brocks cushion plate I'd jus order one for a 04 gsxr 1000 right..I'm new and have similar problem..
I would recommend calling Brocks Performance. Installed this Cush Mod for drag racing. I will say that after this modification bike has performed well.
240p? Only reason Im letting this slide is it was filmed 11 years ago. Or more than likely filmed in 1432 and uploaded 11 years ago. Also, i noticed you forgot to put the CKP sensor back on the bolt. lol never mind you caught it.
What are you talking about? 240P?
Best 2007 GSXR 1000 clutch installation video on RUclips. Thank you so much, please keep making these videos!
What’s was the problem because I have that same issue
I had a bad fuel pressure gauge. I tried another gauge and the fuel pressure read correctly.
TPS is out of spec.
I replaced the TPS and reset parameters it acted the same way. I called it as bad computer after testing other sensors and functions. He couldn't find an ECU for whatever reason so I will never know.
Lol how much HP ? Uhhhh I’d say, Enough 🤭🤫
I learned so much from this great video! Thank you for making it. Any idea is the process is much different on the 02/K2 engine? I have one in my track car and even though it only weighs 460kg (just over 1000lbs) it's very difficult to get off the line and stalls very easily when trying to pull away. Do I need to upgrade the springs, the plates or the whole lot? Does anyone know please! Thank you!
This is a cheaper alternative solution!..... So they say! www.gixxer.com/threads/k1-k4-clutch-fix-cushion.140539/
ruclips.net/video/kTeeO7V1hW8/видео.html
Can anyone identify what this is? Mine is doing the same thing. Is it my clutch plates?
This video was helpful. I own the exact same bike in the video. Same color, same year. I found one that was nearly brand new. It is in a preserved show room condition. I love it. I am going through basic servicing, and inspection on it.
What did you do to remedy this? What was the issue??
I had a bad fuel pressure gauge. I tried another gauge and the fuel pressure read correctly.
Excellent bike and music. What was the final whp?
Hey I have a k9 GSXR 1000. My clutch be slipping while I race because I’ll be dragging it hard. If I replace the clutch would it help it stop slipping. First it did it in 1st and 2nd gear. Now it’s slipping in all my gears when I try taking off fast.
you should buy a torque wrench!
hello, is this the pressure of stock fuel regulator ? it's 46 ? 48 ? thanks
Do they sell this nitrous system as a whole kit
Thanks for you explanation, I'm in Brazil, how can I buy that yellow peace that you are changed ?
Conseguiu a peça? Também quero fazer na minha 2009.
Its ugly but I respect your vision!
How much nitrous can a stock 750 motor hold with a nitrous controller and pull some timing
Thank you for posting this!!
Man it's good to see something other than 1000,1300 and 1400's running hard do a interview on that bike.
On my k4 1000 my clutch grumbles and snatchas wot will it be
BAD ASS 👍
Do u the same for gsxr 750 2007
hi mate thanx for nice explanation. I owe 1000k1 do u know if i have to use them 2spring washers on my clutch ? my service manual not shoving any washers just drive and driven plates but heynes manual does....not sure what is correct...thanx
Get a factory service manual for your year and model. All that info should be in there with illustrations. Haynes is not a reliable source of info imo
So the Brock's clutch kit mod helps prevent bogging ? Is that what u mean by bucking or as in the bike lifting
great video. very well explained. thank you. keep it up u are good at explaining it very well. thanks again and keep the rubber on the road. 👊
that bike is unique i love it love the tune Wat is it
so how much power to the wheel with nos ?
That bike is HOTT!!!
hey buddy I have same bike did my clutches for the 1st time my self last week I put brocks thicker steel or Cushing steel not sure wats it called but it's the one that came with the brocks kit. next was the flat washer then the one that is cone shape I put it in so cone was facing in? you did it the opposite way but that is the way I took it out of the bike just wondering if I did it wrong wondering if you can help
Great video! extremely helpful! it gives me the confidence to do this myself.
i didnt understand about the orientation knotch were would i see that again
Were can I buy it from WITHOUT THE HEAVY DUTY SPRINGS!
nice
ut oh
wow ....that's sick....love it
good video. ive seen a lot of other videos and some will cheap out and silicone the clutch cover back on...
Your Honda wouldn't stand a chance. .
beautiful.. work of art.. kawboi for life
Thanks for the great video! I'm hoping you can help me with a problem I'm having with my 05 gsxr1000 track bike. I discovered it had only one cam reaction wave washer in so i put in one more, but it still engages the slipper clutch with the slightest release of the clutch at a stop. I'm planning on adding the 3rd wave washer and hope it fixes it. If I don't want any slipper clutch engagement can I leave out the adjustment pins like you did? The tighter those pins are screwed IN the more it will engage on decel, right? Thanks! Ps. Great response to that shmuck Paul Fisher.
Did yo fix it ? Please let me know . I went to brocks page clutch mod section , and download pdf instructions for gsxr 1000 2005 you supose to have only one wave spring wachers and eliminate the lift nuts . Again please let me know
+jonathan cappiello Hi Jonathan, Thanks for the note, The manual I have for my bike has 3 wave washers in the diagram. I added it, torqued the springs a bit tighter than spec and it still fucking does this weird thing when I release the clutch. It's as if the back torque limiter is engaging right away. I can get it to act right if I release the clutch super slow. It's horrible for launches though. I don't know what the hell to do. Could the back torque limiter be worn and causing this problem. I'd love to get a really nice slipper clutch but man they are really expensive. what do you think?
+Nick Kaplan i have my gixxer with original back torque limiter and remove all three clutch lifter adjusting pin screws. It feel better, but I just bought from ebay brock clutch mod .
@@CappielloFPV hi I was thinking about doing the same thing myself to my k6. I was going to get the Brock's Performance mod. But I was thinking about just doing the same thing as you did by just removing the 3 pin things. Well as far as I can see and work out once that 3 pins are removed you no longer have a slipper clutch. I was just wondering how you found the bike after that does it, does it still do that funny thing after you pull off some time's?? Or do you think it would still be worth getting the clutch mod thing. It was just to help me from doing the 3 pin removal then having to take the clutch apart again to fit the mod, Cappiello.
Wat was or is they best gear setup ? Stock bike 67" long ???
2007gsxr 1000
I have a Gsxr 1000 2006. I did everything you did but for some reason when I start it up and put the bike in first gear, the bike doesn't go anywhere. When I take my hand off the clutch in first gear the bike keeps running like it's in neutral and doesn't shut off like it normally would. I ran through the clutch at least 4 times and the same thing keep happening. Any suggestion on what it could be?
+Rob Stephens have you fixed this? My bike won't move either but I didn't replace the clutch yet.
Yeah I just took it to the shop. Had t towed to them. They fixed it.
+Rob Stephens yes but what was the problem? I'm sure they told you? And how much was it to fix?
+INFINITYCL they said that I didn't soak the plates long enough so they didn't grip. They also said that the pressure plate didn't lock it properly. Which I know it was because I did it like 4 times. It cost me 175 for them to fix it.
+Rob Stephens another question I'm trying to take my fairing off but it's a special took I need for the lower fairing part was yours like that too?
Dude please help ASAP what is happening in the short clip of the "problem" ????? Got a GSXR 1000 and it's doing this really bad when I launch. My 750 didn't do this. Is my clutch bad? Text me a reply please would appreciate it a lot 216 280 2513
did you watch the video at all? haha this video is the answer to your question. smh
Haha i did, but it was a lot worse than shown in the video. turned out i was completely missing a few parts inside the clutch. bike is sold anyways dont care now.
What's song called
Thank you for this video! It helped me a lot!!! It definitely saved me from making some mistakes
Very good video!
Walter Sproutz
Great runs !
Thanks brother this video saved me lots of money and time I really appreciate it