- Видео 2
- Просмотров 117 064
koffeegod
Добавлен 7 окт 2006
DIY PowerMax AE Power Rack Clone
This is a shop-built, DIY power rack that's a little different than what you're probably used to seeing. It's modeled after the PowerMax AE Power Rack which features an open walk-through design.
I looked at numerous rack designs but settled on this one because of it's improved stability. Instead of a typical 4'x4' footprint, this rack is 6'x4'. That means it also takes up more space in your room, so keep this in mind.
Despite being larger, this rack uses about the same amount of lumber as other DIY racks due to it's minimalist design, which helps keep the cost reasonable.
All in, I spent about $250 on materials, including paint. With a few tweaks, this rack can be built for less than $200...
I looked at numerous rack designs but settled on this one because of it's improved stability. Instead of a typical 4'x4' footprint, this rack is 6'x4'. That means it also takes up more space in your room, so keep this in mind.
Despite being larger, this rack uses about the same amount of lumber as other DIY racks due to it's minimalist design, which helps keep the cost reasonable.
All in, I spent about $250 on materials, including paint. With a few tweaks, this rack can be built for less than $200...
Просмотров: 115 806
Видео
Brandywine River Flood
Просмотров 1,3 тыс.10 лет назад
Brandywine River flooding after heavy rainstorm.
Just saw your other video too...Wilmington? Nice!
Just saw your other video too...Wilmington? Nice!
Nice build. I want to build one. I like your 3/4"plywood gussets. Very solid and stable. I'll have to make mine a little shorter for my basement but great design. Thanks for the info. Great video!
Yeah, that is a good design, thanks for showing that.
Best build so far... And I've seen alot! I'm totally nicking the J Cup idea, looks clean.
Hello, very nice rack, thank you for sharing. Can you explain why two front posts are so tall? It seems like they are not doing much except holding safe bars? Sorry if you already said about it, I didn't catch
is this good today?
i watch 3 days every power rack on youtube. because i will do one. and this is the best i think. the funny think, in my mind its 85% complet to my perfect rack
Check out afterglow's great videos. He made a better version of this power rack and uploaded step-by-step instructional videos. Here's a link to his channel: ruclips.net/channel/UCSOIgc8X58FoiBKqjl_9ydAvideos
Nice design. The 3/4 plywood bracing is a nice clean and strong solution.👍
Front Post Stability Question - Would this benefit from a horizontal brace between the front uprights if high enough to clear for entrance or an angle connector (rafter) between the front & middle uprights (similar to what you have between the back to middle upright)? Asking when I viewed the demo video from Afterglow it appears that the front posts wobble often. Your design & video are A+ but wanted to ask before making this to get your thoughts.
the load bearing those post take is very minimal. You could put in a horizontal brace but there isnt really any point. Also depends on your height and if you are wanting to overhead press inside the rack.
@@7mattga7 Thanks for the comment. I may skip the horizontal brace, and do a 'Rafter' type post instead so the side profile looks like an A. Good point about the overhead press.
Wow great job!
Wish I would have seen this sooner. Just built mine yesterday but it is not quite as good as this one. It'll do the nob though
What is the bracing that you used called? Or did you just make them?
I did my power rack with 4 × 4 from the Buff Dudes. Your bar holders are a good upgrade for my power rack. Thanks for sharing. Saludos from Puerto Rico.
what kind of wood do you use, or someone who knows please
I used Home Depot lumber. Not sure which country you're in but something like pine/cedar/birch should work for you.
I can see injuries happening with those bolts scraping your legs and ankles.
Very cool I’ve been telling people for ages that plywood gussets are the way to go when making wooden gym equipment.
Thanks 🙏
1:40 nice setup man What the maximum load you had on these cups? You said 1" bolt, is it the M24?
The most weight I've had on it was 400lbs (~180kg) which is all the weight I own. Side note: those 1" bolts have a tensile strength of around 20,000 lbs, which would make their shear strength something like 12,000 lbs...each. The 4x4 posts would fail looong before the bolts and 4x4 posts can support an axial load of something like 1,200 lbs per sq inch. In short, I think this setup could easily handle as much weight as anyone could reasonably lift. Yes, I believe 1" is equivalent to M24.
@@koffeegod Thanks. It definitely won`t shear, but it would bend at some point. I`m mounting mine on a steel post. I did some testing with an M10 bolt and it slightly bent at 75 kg and much more at 120 kg. the 180 kg is the total weight or just one side, then 360 kg in total?
Hey bro - I thought you might be interested in these upgrades I did to the power-rack recently.. I reckon you could add some of these to your rack too - The core plate & the incline brackets have probably been the best bits: ruclips.net/video/yOtvAcw-jhk/видео.html Hope life is good. 👍
Damn this is a beautiful gym . Love how you did the braces . bet a lot of the views are during covid 19 .
Is that a 7ft long bar?
Yes. It's from this super cheapo set: www.academy.com/shop/pdp/cap-barbell-300-lb-olympic-grip-weight-set
This is such a nice rack. Quality job mate :)
Hey man - I wanted to say a big thank you, as I adapted your design, and built my own outdoor version of this build - check it out here: ruclips.net/video/FHMTae6zAT8/видео.html Also, I solved the problem of where to put the dips bars - If you want to see how I did it, I also made a video walkthrough of all the steps to build this, if you want to have a look here: ruclips.net/video/Wqpg-N6JMfI/видео.html I gave you a shout out in the description for my videos... So thanks again, and hope you're enjoying your rack over in the US, as much as I am here in the UK. Cheers. :)
What are those braces on the bottoms and back of the rack? I've never seen those and I did construction for years before I got into EMS and Security work.
Are you talking about the black gussets?
I really want to build this ASAP just how you built this one!
Nicest looking DIY rack that I've seen thus far, but unfortunately outside of my time availability to build. :(
How’s it holding up a year later?
Except for some scuffs from the bar knurling, it's still in perfect condition. I've been meaning to add a flap of rubber behind the j-cups to prevent that, just haven't gotten around to it yet and it's really not too bad. Haven't even had to re-tighten any bolts yet, thankfully (though I did crank them down pretty tight to start).
after a year or so of using this rack is there anything you wish you would have done differently? Looks great
Looks good and seems solid. Gonna need to drill more holes if you ever intend to do any partials. Looks like you could add a pulley with just a bit of modification.
good idea I would have put a place on the back to store your weights
professional build quality, Im going to be doing some thing like this as soon as I can
How much have you added to your bench and squat (I’m assuming using this rack) if you don’t mind me asking
This is awesome. How portable is this though? Like if you were to relocate to another house.
Good question, as this has already happened. The sides separate as complete assemblies from the cross members and everything can be flat-packed and transported easily in the bed of a pickup. Took about 5 minutes to break down and 5 more to reassemble.
Great work
Awesome dude, is best looking I a have seen on RUclips, also it's design look superior, respecting others works you improve it, bravo.
Beauty. Great job!
THIS IS SICKKK
the plan in metric would be awesome :D ;)
Great Job. I like the plywood joints idea...
Nicely done ✅
Smart build !!!!
Beautiful job, but can I please suggest, buff them bolts down before you rip your ankles on them.
Congradulations. In 1956 I made my first power rack out of 2x4 's. I used a hand cranked auger to bore holes for the support rods and the bolts. It was bolted with 3/8 " bolts and I used metal plumbing pipe for the barbell support rod. It could hold more weight than I could lift. I scrounged the 2x4 's where ever I could find them and got the bolts at a hardware store. The all metal power racks are great but they can support more weight than many people can use. If you have the money get a metal power rack. If you don't have the money you can improvise and still get great results.
It's amazing how little changes after 64 years. Cheers to you, bro
It looks absolutely beautiful, must be a pleasure to use!
Awesome build. Been looking at designs and this one tops it.
Give us a parts list if you can please.
I just added an imgur gallery to the video description with detailed drawings, measurements, cut list, paint color codes, material recommendations, build recommendations, etc. imgur.com/a/Q6Kgyiw
That's real nice
That is sick! I give you £30,000 for it!
Where can I find the sketch ups at? That's is awesome
in the video description