Видео

A pan head screw through back wall of cabinets on either side into the sidewalls of wine rack

Great idea! I never have but that should work.

yes I did

it should be close, something that is sold as a 36" should be slightly under like 28 7/16" which may come with some trimming.

Well I'm glad that your wife shared my video with you, that's awesome! Hmmm, I would follow the companies instructions, I guess? I have not had issues with mine except I need to refinish it its been 5 years since I built it.

@@jaredmyers3227read it again. That is if the grain of the 2 pieces are perpendicular, not parallel.

oh, that's interesting, good to know

Yes they are standard sizes. Standard wall oven sizes typically run 24, 27 or 30 inches wide. The units themselves will be slightly smaller in order to fit inside. For example, a wall oven that requires a 30-inch width cutout may measure around 28 ½ inches wide. I hope that helps.

Hey, thanks I appreciate it. Still trying to get better at it. Be patient with me, I will get better at it.

I used this Ryobi amzn.to/3Lp2Vzm and I used these biscuits amzn.to/3S8RhMK

Just a warning, this sink needs cleaned often to stay white, but you probably already know that. Just under 8" between back of sink and tile on the wall. I think the sink came with a cardboard template, why I didn't use it, I couldn't tell you. lol

Glad it was helpful!

Right it seems like they would have said something in directions or something but I guess they just think we will have 3 inch deep countertops so it wont have drop into the cabinet box, lol. Yes, cooktop is from IKEA. The counter depth helps but I still had to cut it. Good luck with your kitchen, I hope it goes well.

Thanks so much! Where were you when I was leveling out island...I could have used your help. ;) Yeah, you are right that would have been way easier. Thanks, I will keep that in mind for next time.

@@jaredmyers3227 haha you wouldnt need me, just a decent laser! It is a good investment!! Especially if ya don't have much help and you diy solo.

I like that, that's a good idea.

Oh yeah that would work really well, good idea! Thanks for watching I really appreciate the compliment. Nice, two! Thanks, the island was a ton of planning, work and a lot of fun to build.

Just shy of 30"

@@jaredmyers3227what is width of your cabinet?

Dimensions of the cabinets all together is 48"x85" and the butcher block top is 62.5" x 92" Hey, thanks so much I appreciate the complement! More are coming

well it looks like they changed the design a little bit from when I did mine but these look very similar www.ikea.com/us/en/p/sektion-leg-10265518/

Thanks so much for saying that. Yes they are "helpful" lol

Glad it was helpful! Thanks for watching.

Yes here is what i used amzn.to/3RsJDwF

@@jaredmyers3227 thank you

Glad it was helpful! Thanks for watching

You probably could but you have to make sure you attach to studs, which might be problematic based on cabinet mounting points. When you mount standard wood cabinets the back wall is usually a solid piece of wood so you can put screws anywhere but with IKEA cabinets the back wall is a press board so you can not use it mount cabinet, the screws would pull through the pressed board or the rest of the cabinet would fall off the wall and the back would still be attached to the wall.

You are welcome and thanks for watching. Yes, its a fun place to shop too

Thanks so much. Yes, awesome idea! just don't put an oven in it like I did, lol.

perhaps that would work

You are welcome, I hope you Ikea builds will be a bit less stressful now. Thanks for watching!

I was thinking about "franke garbage disposal WDJ75"

hmmm, why would they say they don't recommend or didn't mention it. Seems silly to make a kitchen sink and not expect people to put a garbage disposal in it. So far I have had no problems with it and haven't heard of anyone having issues with it. I would suggest doing a bit more research just to make sure you feel comfortable with your decision to go with one or not go with one.

Thanks!!!

Thanks! Good luck on your future kitchen!

@@jaredmyers3227 looking forward for your next project !

Oh, no. Im no contractor but Im glad it helped. Thanks I appreciate the compliment!

You can but I would be concerned about how useable they will be when they are up high. You wont be able to see into them.

@@jaredmyers3227 ah thank you. My oven is going under the bench

@@jaredmyers3227 I think you call bench Aahh counter tops

yep, it hurts

Thanks, what did I do that is dangerous?

@@jaredmyers3227 The small member crosscut not using anything but your hands is extremely subject to binding as the board is in the process of being cut. Carpenter and use saws daily for over 30 years. I’ve watched guys pinch into a blade and have material fly violently. Take care.

Thanks! The three butcher blocks 615, zip bolts 30, sealer 120, tools, safety equipment and random consumables around 300. Rough total before covid is just under 1100. That was maybe a 1/7 the cost granite, quartz or stone.

lol, yes they are so helpful, he loves to steal the cardboard as well. Do you assemble IKEA items for your clients?

@@jaredmyers3227 yes, I'm a Tasker from Task Rabbit. Was checking out your video trying to find a solution for the fillers around the panel matched refridgerator in a full Ikea kitchen install I'm doing. Plus other renovations.

@@richardwhitaker4148 Nice, I thought about trying Task Rabbit but havent yet. I think I know what you are talking about, and my fridge just fit but I would have added filler to sides to fridge and doors would open better. I think getting end face panels and cutting them down to fill the gaps may be the best, but what are you thinking?

Thank you so much for the helpful tips and insights on Ikea kitchens! Your advice on measuring dimensions thoroughly and being creative is definitely going to come in handy for anyone considering a kitchen remodel.

Mick Moo, love the name, that is so unique. How did you come up with the name? Thanks for watching!

man that stinks, they have a list of things of family rewards on there websites. couple good ones free coffee on fridays to mondays, if you break something in transit of putting it together they replace it and a few other things but no discounts make me sad. Thanks for letting us know about that!

I did not put any protection on block. My thought was if this is safe to mount on a laminate counter (that has pressed wood and glue) than it will be safe with butcher block. Plus the heating elements are pretty far from the edges and the appliance has a metal box around everyghing. There is also a gap between metal box and butcher block. The appliance rests on the butcher block around the edge and screws into the cabinet below. Keep following me I am working my way through my whole kitchen build and show all the steps. I just started getting to the Island in episode 12. Thanks for question!

I'm so sorry for your loss. Losing a beloved pet is never easy.

Did you check out the ikea website, they have colors and wood grain but I get what you are saying. Depends on the style you are going. I call it simple and clean, you call it boring and white, lol. Depends on the aesthetic you are going for. Which is taste based as well as what looks good in the style home you have. I wish you luck in your kitchen and I hope you find what you love!

Yesss, drawers all the way! No more crawling on the floor to reach the back of the cabinet. And let's not forget how satisfying it is to slide a drawer open and see all your kitchen gadgets neatly organized.

I agree!

Absolutely, the push open actuators I used on island doors are another item you spec out with the Ikea kitchen Designer in the store. The knife storage is from Ikea in the kitchen section with all the silverware organizing trays. They are rubber fingers that stick up and you place the knife in them.

great question, nothing was load bearing, so I did not have to compensate

Amazing pricing for the appliances!!!

this was like 4 years ago so I assume the prices have been affected by inflation since I purchused

this drawer went under the oven for baking sheets and such

Thanks so much! 😊

Thanks so much! Best of luck on you Island

Wow, thanks! I am working to get the whole kitchen install up so the whole process is less mysterious and more approachable for everyone. I am really glad you found it helpful.