Видео

still got your lathe then des you got the sandblaster still aswell

each bullet shrink the boat and an illegal t falls out and sharks come

I think it's crazy that here in the USA you can legally grow cannabis in some areas if you're over 21, but there is no legal age for growing tobacco. It is totally unregulated and legal. A 6 year old could hypothetically grow their own tobacco, but can't grow weed. They shouldn't do either, but its an odd legal loophole. Anyways, I plan on growing some tobacco soon. About how long do they take from seed to harvest?

have border force and the rnli getting in the way of your shots

nice you finaly working on it dez i have some good imput mate ol need some white cliffes on english or english flag lo spikey mines lol border force and the rnli getting in the way of your shots ...survivors swimming tot he shore higher points cos smaller

its doing well mate i have seeds that i have grown owver tha last few yr so climatised well, hiw did yours outside go cure it and smoke it btw nicoteen isnt disolvd in water mate its really hard to extract :) dez moisten it a bit w cabage leef in the bag with it and use grinder to grind it not too fine thats what i did

Have too many migrants in the boat, the boat sinks. Maybe the RNLI will rescue them, random chance.

Looking back I wish I had cleaned the comm grooves out.

When will we see something similar for +2a/b and +3?

lol for the last few days when I leave for work at around 2am there have been hedgehogs, sometimes babies with adults, sometimes just adults but always 2 or 3 minimum outside by my front door steps but sometimes 6 or more and I wondered why, I have just worked it out as I just did not think of it until now. The weather has been so hot that the wheelie bin is full of maggots, they must have been climbing out and going all over the floor, bless the hedgehogs as they must be loving it lol

here is the video of the tester working on a Subaru Impreza Alternator I repaired. Fast Forward to 1 hour 12 minutes. ruclips.net/video/DakbQyfLEko/видео.html

Only use a 12 volt supply to the test kit. Don`t use the car battery since it can go over 12 when testing.

It works. I`ve tested it on an alternator and it even worked on a low frequency. Went from 12.4 volts to 15.5 volts when I adjusted to duty cycle knob.

This is how to make a Smart Alternator Tester Square Wave Generator for about £20. ruclips.net/video/y0A5s5m1_AY/видео.html

A few words here in the comments to help the RUclips algorithms 😜

Have a look at map() function to get 1023 to 100

Lovely job Sir.

int f = 0; int d = 0; float dd = 0; float ff = 0; int l = 0; void setup() { } void loop() { int f = analogRead(A0); int d = analogRead(A1); dd=d; ff=f; dd=(ff/1023)*dd; // WAVE GENERATOR for (int i = 0; i <= f; i++) { if(i >= dd){l=0;} if(i <= dd){l=1;} if(i >= dd){digitalWrite(9, HIGH);} if(i <= dd){digitalWrite(9, LOW);} delayMicroseconds(25); } }

Got a video of a bearing change on this alternator coming up in a few days.

I just repaired the one on my 1963 Massey Ferguson 35x (the original I'm fairly sure) and having opened it up I was amazed it had been working up to that point. However, after giving it a good clean up it now works fine. The contacts have eroded to about half their original thickness so may not last another 60 years.

all working now then mate where you getting the speccies from i know one you had years ago but have you got more than one now double sided sticky tape blue peter special mate :)

Did you get the service manual i gave John

Hi, it's Alan the owner of steering computer,for it to work power has to go from computer to control which you sent back to me,also at other end the power out motor goes to small hydraulic pump only has power when control is used,I did send service manual to John,did you get it?that tells you all the volts across board,the manual is not for that machine but they are the same,but the 10 has more power, please get in touch if I can help,I am in the process of buying another one,but it's second hand and you always get problems

I was pointing at the wrong chips in the video. IC15 is 1, IC16 is 2, IC17 is 4, IC18 is 8, IC19 is 16, IC 20 is 32, IC 21 is 64, IC22 is 128.

that's so cool dude! If I may know what components must be purchased to make the machine ?

thats so cool!! i loved this video and sat through the entire thing, thanks for this and keep doing awesome stuff!

#include <Servo.h> int step=0; int a=90; int b=70; int c=75; int jaw=1; int de=15; // ROBOT SPEED. LOWER IS FASTER. int ang=0; Servo sa; Servo sb; Servo sc; Servo sd; void setup() { sa.attach(9); sb.attach(10); sc.attach(11); sd.attach(12); } void loop() { start: if(step == 0){ step=step+1; goto home; } if(step == 1){ step=step+1; ang=20; goto pick1; } if(step == 2){ step=step+1; goto lift; } if(step == 3){ step=step+1; ang=120; goto drop; } if(step == 4){ step=step+1; goto home; } if(step == 5){ step=step+1; ang=40; goto pick1; } if(step == 6){ step=step+1; goto lift; } if(step == 7){ step=step+1; ang=140; goto drop; } if(step == 8){ step=step+1; goto home; } if(step == 9){ step=step+1; ang=60; goto pick1; } if(step == 10){ step=step+1; goto lift; } if(step == 11){ step=step+1; ang=160; goto drop; } if(step == 12){ step=step+1; goto home; } delay(10000); step=0; goto start; pick1: if(jaw == 1){ sd.write(120); // OPEN JAWS delay(1000); sd.write(95); // TURN JAWS OFF jaw=0; } if(a <= ang-1){a=a+1;} if(a >= ang+1){a=a-1;} if(a != ang){ sa.write(a); delay(de); } if(a == ang){ if(b <= 44){b=b+1;} if(b >= 46){b=b-1;} if(c <= 74){c=c+1;} if(c >= 76){c=c-1;} sb.write(b); sc.write(c); delay(de); if(b == 45 && c == 75){ sd.write(80); delay(1000); jaw=1; goto start; } } goto pick1; drop: if(a <= ang-1){a=a+1;} if(a >= ang+1){a=a-1;} if(a != ang){ sa.write(a); delay(de); } if(a == ang){ if(b <= 44){b=b+1;} if(b >= 46){b=b-1;} if(c <= 74){c=c+1;} if(c >= 76){c=c-1;} sb.write(b); sc.write(c); delay(de); if(b == 45 && c == 75){ sd.write(120); delay(1000); jaw=0; goto start; } } goto drop; home: if(jaw == 1){ sd.write(120); // OPEN JAWS delay(1000); sd.write(95); // TURN JAWS OFF jaw=0; } if(b <= 89){b=b+1;} if(b >= 91){b=b-1;} if(c <= 89){c=c+1;} if(c >= 91){c=c-1;} sb.write(b); sc.write(c); delay(de); if(b == 90 && c == 90){ goto start; } goto home; lift: sd.write(70); if(b <= 89){b=b+1;} if(b >= 91){b=b-1;} if(c <= 89){c=c+1;} if(c >= 91){c=c-1;} sb.write(b); sc.write(c); delay(de); if(b == 90 && c == 90){ goto start; } goto lift; }

I don't know specifically what they are called but I like solenoids that are in like boot shaped housings. They look far easier to repair than these types.

des rem little phill i see him last night he said to say hi

hahaha il just do this before i stop and this then that hahaha im the same you think i will stop now but your brain keeps working on the problem great video m8

i rem denny and you doing that about 40 yrs ago on my amiga at my place that takes me back lol

It works better now I`ve got the gravity equation right. I forgot to times the distance by itself. LET F=GC*((MA(N)*MA(M))/(C*C))

9 ON ERROR GOTO 165 10 DIM X(50) 20 DIM Y(50) 30 DIM XX(50) 40 DIM YY(50) 41 DIM XD(50) 42 DIM YD(50) 43 DIM XXD(50) 44 DIM YYD(50) 45 DIM MAD(50) 50 LET F=1 60 LET GC=1 70 DIM MA(50) 80 LET P=2 REM AMMOUNT OF PLANETS 90 LET A=0 100 LET B=0 110 COLOUR 1,15 120 COLOUR 2,0 130 GCOL 1 140 COLOUR 130 150 GCOL 130 160 COLOUR 1 165 CLS 170 *REFRESHON 171 CLS: INPUT TAB(10,10);"NUMBER OF PLANETS/STARS";P 172 CLS 173 PRINT TAB(5,2);"PLANET NUMBER X Y X SPEED Y SPEED MASS GRAVITY CONSTANT" 174 PRINT TAB(5,3);"============= ===== ===== ======= ======= ==== ================" 175 PRINT TAB(53,4);GC 176 FOR N=0 TO P-1 177 PRINT TAB(5,4+N);N+1 178 PRINT TAB(20,4+N);XD(N) 179 PRINT TAB(26,4+N);YD(N) 180 PRINT TAB(32,4+N);XXD(N) 182 PRINT TAB(40,4+N);YYD(N) 183 PRINT TAB(48,4+N);MAD(N) 184 NEXT N 185 PRINT TAB(5,5+P);"ENTER 0 TO RUN OR 99 TO CHANGE GAVITY CONSTANT" 186 INPUT TAB(5,6+P);"ADJUST PLANET NUMBER";PL: IF PL=0 THEN CLS: GOTO 300 187 IF PL=99 THEN INPUT TAB(5,7+P);"INPUT GRAVITY CONSTANT = ";GC:GOTO 172 194 INPUT TAB(5,7+P);"X = ";XD(PL-1) 195 INPUT TAB(5,8+P);"Y = ";YD(PL-1) 196 INPUT TAB(5,9+P);"X SPEED = ";XXD(PL-1) 197 INPUT TAB(5,10+P);"Y SPEED = ";YYD(PL-1) 198 INPUT TAB(5,11+P);"MASS = ";MAD(PL-1) 199 CLS: GOTO 173 300 FOR N=0 TO P-1 310 LET X(N)=XD(N) 311 LET Y(N)=YD(N) 312 LET XX(N)=XXD(N) 313 LET YY(N)=YYD(N) 314 LET MA(N)=MAD(N) 315 NEXT N 320 FOR N=0 TO P-1 321 FOR M=0 TO P-1 322 IF N=M THEN GOTO 330 325 IF X(N)=X(M) THEN LET X(N)=X(N)+0.0001: LET X(M)=X(M)-0.0001 326 IF Y(N)=Y(M) THEN LET Y(N)=Y(N)+0.0001:LET Y(M)=Y(M)-0.0001 330 NEXT M 331 NEXT N 380 REM *REFRESHON# 390 FOR N=0 TO P-1 REM DRAW THE PLANETS 395 LET SIZE=8+(MA(N)) 400 CIRCLEFILL X(N),Y(N),SIZE 410 NEXT N 420 FOR N=0 TO P-1 REM MOVE THE PLANETS 430 LET X(N)=X(N)+XX(N) 440 LET Y(N)=Y(N)+YY(N) 450 NEXT N 460 FOR N=0 TO P-1 REM CALCULATE DISTANCE BETWEEN PLANETS AND CALCULATE GRAVITY FORCE 470 FOR M=0 TO P-1 480 IF N=M THEN GOTO 690 490 IF X(N)>X(M) THEN LET A=X(N)-X(M) REM WORK OUT TRIANGLE "A" SIDE 500 IF X(N)<X(M) THEN LET A=X(M)-X(N) 510 IF Y(N)>Y(M) THEN LET B=Y(N)-Y(M) REM WORK OUT TRIANGLE "B" SIDE 520 IF Y(N)<Y(M) THEN LET B=Y(M)-Y(N) 530 LET C=(A*A)+(B*B) REM WORK OUT TRIANGLE "C" SIDE 540 LET C=SQR(C) 550 LET AN=DEG(ATN(B/A)) REM WORK OUT THE ANGLE 560 LET CO=(ACS(A/C)) REM WORK OUT THE COSINE 570 LET SI=(ASN(B/C)) REM WORK OUT THE SINE 580 IF X(N)>X(M) AND Y(N)>Y(M) THEN LET CO=CO+PI: LET SI=SI+PI REM ADJUST THE ANGLE 180 DEGREES 590 IF X(N)<X(M) AND Y(N)>Y(M) THEN LET SI=SI+PI 600 IF X(N)>X(M) AND Y(N)<Y(M) THEN LET CO=CO+PI 630 LET F=GC*((MA(N)*MA(M))/(C*C)) REM GRAVITY FORCE EQAUTION 640 LET F=F*(MA(M)/MA(N)) REM ADJUST FORCE FOR WIEGHT 660 LET XX(N)=XX(N)+(F*(COS(CO))) REM APPLY FORCE TO X AXIS 670 LET YY(N)=YY(N)+(F*(SIN(SI))) REM APPLY FORCE TO Y AXIS 690 NEXT M 700 NEXT N 710 IF INKEY(-99) THEN GOTO 170 730 *REFRESH 750 *REFRESHOFF 780 CLS 790 GOTO 390

was that ezzy hes not got a boat now has he lmao des

that machine brings back some memories

Oi oi found it spelled ya name wrong first time lol

should ask ronnie mate if stuck mate he has thall the machines etc to test shit lol

Nice bud. But how do you get the bike their without spawning in it ; ]

Why if bench test ford ranger starter, it not stay ingage if i keep small wire on pin. It uningage with start small wire on start point. It must only uningage only when i take of start thin wire, am i right or wrong? Rrrrrealy hope someone can help me. Thanks guys.

add wallls up and down and gravity and you have a basic version of flappy birds lol

int x[20]; int y[20]; int a[20]; int score=0; int highscore=0; int rockcount=0; #define key1 2 //connect wire 1 to pin 2 #define key2 3 //connect wire 2 to pin 3 #define key3 4 //connect wire 3 to pin 4 #define key4 5 //connect wire 4 to pin 5 int key=0; int shipx=3; #include <Wire.h> #include <LCD-I2C.h> LCD_I2C lcd(0x27, 20, 4); // Default address of most PCF8574 modules, change according byte shipChar[] = { B11000, B11100, B11110, B11111, B11111, B11110, B11100, B11000 }; byte rockChar[] = { B01110, B10111, B11101, B11111, B11111, B10111, B11101, B01110 }; void setup() { for (int i = 0; i <= 19; i++) { x[i]=19; y[i]=random(4); a[i]=0; } pinMode(key1, INPUT_PULLUP);// set pin as input pinMode(key2, INPUT_PULLUP);// set pin as input pinMode(key3, INPUT_PULLUP);// set pin as input pinMode(key4, INPUT_PULLUP);// set pin as input lcd.begin(); lcd.createChar(0, shipChar); lcd.createChar(1, rockChar); lcd.display(); lcd.backlight(); delay(2000); } void loop() { begin: score=0; for (int i = 0; i <= 19; i++) { x[i]=19; y[i]=random(4); a[i]=0; } rockcount=0; start: int ran=random(20); if(ran <= 1){ a[rockcount]=1; rockcount=rockcount+1; } key=0; int key1S = digitalRead(key1);// read if key1 is pressed int key2S = digitalRead(key2);// read if key1 is pressed int key3S = digitalRead(key3);// read if key1 is pressed int key4S = digitalRead(key4);// read if key1 is pressed if(!key1S){ key=1; } if(!key2S){ key=2; } if(!key3S){ key=3; } if(!key4S){ key=4; } if(shipx <=2 && key == 3){ lcd.setCursor(0,shipx); lcd.print(" "); shipx=shipx+1; } if(shipx >=1 && key == 4){ lcd.setCursor(0,shipx); lcd.print(" "); shipx=shipx-1; } for (int n = 0; n <= 19; n++) { if(a[n] == 1){ lcd.setCursor(x[n],y[n]); lcd.print(" "); if(x[n] == -1){x[n]=19;y[n]=random(4);} x[n]=x[n]-1; lcd.setCursor(x[n],y[n]); lcd.write(1); if(x[n] == 0 && y[n] == shipx){ lcd.clear(); goto boom; } } } lcd.setCursor(0,shipx); lcd.write(0); delay(250); score=score+1; goto start; boom: if(score >= highscore){highscore=score;} lcd.setCursor(5,0); lcd.print("GAME OVER"); lcd.setCursor(5,1); lcd.print("SCORE"); lcd.setCursor(11,1); lcd.print(score); lcd.setCursor(0,2); lcd.print("HIGH SCORE"); lcd.setCursor(11,2); lcd.print(highscore); key1S = digitalRead(key1);// read if key1 is pressed if(!key1S){ lcd.clear(); goto begin; } delay(1); goto boom; }

you found a game to play then des

Thanks for this video. I'm just reconditioning one of these and when I knocked out the old bearing it came out with all the washers and stuff in one go and i had no idea what order they wnt back in. So your video has saved the day. My fibre washer had disintigrated and left just a few bits so didn't know it was a fibre washer until seeing this. I can ony find drawings of older versions of the C40 dynamo which are very different in the bearing area. Cheers.

If you use OBS studio on your desktop it will help record your screen so you don't have to keep moving your camera! great video

Thanks for this😄

const int analogInPin = A0; // Analog input pin that the potentiometer is attached to int sensorValue = 0; // value read from the pot #include <LCD-I2C.h> LCD_I2C lcd(0x27, 20, 4); // Default address of most PCF8574 modules, change according void setup() { // If you are using more I2C devices using the Wire library use lcd.begin(false) // this stop the library(LCD-I2C) from calling Wire.begin() lcd.begin(); lcd.display(); lcd.backlight(); pinMode(8, OUTPUT); digitalWrite(8, HIGH); } void loop() { // read the analog in value: sensorValue = analogRead(analogInPin); if(sensorValue >= 200){ lcd.setCursor(0,1); lcd.print("RAINING!!!!!!!!!!"); delay(5000); digitalWrite(8, LOW); delay(1000); digitalWrite(8, HIGH); delay(5000); } if(sensorValue <= 199){ lcd.setCursor(0,1); lcd.print(" "); } lcd.setCursor(0,0); lcd.print(sensorValue); lcd.print(" "); delay(500); }

you making a water plants if plants not wet lol- , what happens if it keeps raining woud trhe air keep blowing anver 5 secs mate ?

It works. Just had a storm.

my camr des is 1300d same connection

you made it then dea dez also add sound detectorin so can photo shahing glass etc my camera is same connection s yours i have the 1300d