Видео

Yup,1S using 500mAh tattu packs and xt30 plug. weight is 50g dry. Here is the build thread for more info: intofpv.com/t-1s-toothpick-50g-dry-but-with-1203-11500kv-screamers

thank you mate! I use gyroflow to do the lens correction, I feel it is more like what you see in the goggles this way.

Hahaha just brought me back to my teenage years 😂

At first I thought you had just misspelled saliva, but then I realised, everything... lol Yeah video corruption on the sdcard, gotta use a better one on the goggles.

Thank you! Here are all the details in the build thread: intofpv.com/t-35mm-cf-frame-pusher-whoop

@ thx man 🙌🏼

Thanks Ryan, these low kV 1102s were a good proof of concept using 300mAh sticks. Next level would be high kV 1003s and the next class up of 1s lipo, like 500mAh packs.

ahh that's great news!

@@stuffbymatt583 I picked up two Lux cameras the day they were available. Been busy so haven’t managed to get my first build in the air yet, but hopefully will tomorrow.

​@elnacho_fpv cool! Just subbed to your channel so I can check it out.

@@alperenozgur it's the tmotor 13a 1s aio with.bl32 escs. It's a beast of a 1s aio!

@@stuffbymatt583 i dont get it. how its not frying with 30A ???

@@alperenozgur sorry 13a is per esc. What you're seeing in the osd is total current draw across all four escs. So that limit would be approx 52A (4x13a) for the total draw on all four motors.

@@stuffbymatt583 omg really? didnt knew that osd shows total 😲 thanks

Thank you. A combination of led ring and two narrow beam leds: intofpv.com/t-night-flyer-v3-utilising-the-avatar-hd-pro-camera?pid=217093#pid217093

@@stuffbymatt583 nice. Super light weight with a lot of throw for its size, and it fits perfectly. Great idea

Running the tmotor 13A 1S aio that has blheli32. The 32bit esc delivers more power to the motors than 8bit escs running bluejay/jesc/blheliS. The 1s pack is 1100mah ripped from a 6s pack. It's all about discharge rate. The hole electrical drive train is about dumping the current. Thus was the design goal. Current = torque. Using liion would work but prolly couldn't handle the current peak draw without major sag. Also weight would be a killer mate.

about 2:40mins, these 11000kv suck the current.

@@stuffbymatt583 Parallel batteries trick would give extra time I believe... but anyway it's risky and must be super careful😅

Hahaha thanks mate.

Here's the build thread :) intofpv.com/t-night-flyer-v3-utilising-the-avatar-hd-pro-camera

This is gopro 8. :)

Thankyou mate, yeah the 75g dry weight pulls it down well. 103g with 1050mah lipo.

1s 850mah, toothpick frame, 1202.5 rcinpower 11500kv, lite vtx with nano cam, avans 3" biblades, tmotor bl32 aio fc rated at 1s 13a. Ep2 rx. 58g dry. :)

it's about 40g, 3" biblades

avans 3"

The tmotor 13a aio has blackbox, i used gyroflow preset in BF configurator to configure it correctly. See build thread for more info: intofpv.com/t-1s-toothpick-walksnail-50g-build

@@stuffbymatt583 it was a good built. But i'm not confident if i can do it properly 😭 i will try a bnf

This is the walksnail 1s vtx with nano cam. This is the 1st gen version.

Yes i used blackbox data synced in gyroflow

Do you have any tutorial or guide on how to use black box gyro in gyroflow? Appreciate much.