Видео

Are glass doors needed? Made in China

Do you guys sell in the USA

How much is this door please? Also, I need contact in San Jose, Calif please?

Based in Texas? Nice for me in the USA!

Unfortunately this video has zero to do with installation.

Completely honest review, starting from the start, design looks impressive and the price is reasonable, but the quality is poor. The frame comes in 4 long bars (top, bottom,left and right) and they are held togather with 4 pieces of plastics. I got my friend to help me with the install. Once the frame was assembled as instructed, and while we were putting the frame in place the whole frame wobbled and one plastic broke from top right and the top bar fell on my friend's hand, and crushed the finger. His hand still doesnt functions how it should do(4 years since then). Installed the door few weeks later, but this time another plastic bit broke( on top of the master door which holds the weight of the door) and used epoxy to join it. Soon after install the master door started to lean away from the hinges and started hitting the weather strip at the bottom bar. The door is still there but I dont see it lasting very long. It has lasted 4 years coz we dint have a patio and we have just tiled the patio and probabbly we will need a new door. Would have posted pictures if there was an option. I fell really stupid for not going to the court for the damage this poor construction has caused to my friend. And i am a professional engineer and have installed door and windows in the past.

1:12 slays to the said!!

Where can I find this type of door?

these Are a nightmare to install the instructions are worthless, some holes are pre drilled some weren't, the recommended clearance was way off after weather stripping was installed, had to completely re install to be able to close the door latch, the top of the panels rely on plastic blocks that have the magnet inside, I would have made the blocks aluminum, the door latch itself is built into the door, but the thru holes I door for handle weren't in correct position to allow handle plate to mount to the door, thebholes had to be drilled bigger, and the screws that pull the handle plates together are 12mm too long, and tbe square key had to be cut down 12mm also, very frustrating install for $15k, my boss saw the bloke from the instruction videos at ibs and told him to get fucked

these Are a nightmare to install the instructions are worthless, some holes are pre drilled some weren't, the recommended clearance was way off after weather stripping was installed, had to completely re install to be able to close the door latch, the top of the panels rely on plastic blocks that have the magnet inside, I would have made the blocks aluminum, the door latch itself is built into the door, but the thru holes I door for handle weren't in correct position to allow handle plate to mount to the door, thebholes had to be drilled bigger, and the screws that pull the handle plates together are 12mm too long, and tbe square key had to be cut down 12mm also, very frustrating install for $15k, my boss saw the bloke from the instruction videos at ibs and told him to get fucked

these Are a nightmare to install the instructions are worthless, some holes are pre drilled some weren't, the recommended clearance was way off after weather stripping was installed, had to completely re install to be able to close the door latch, the top of the panels rely on plastic blocks that have the magnet inside, I would have made the blocks aluminum, the door latch itself is built into the door, but the thru holes I door for handle weren't in correct position to allow handle plate to mount to the door, thebholes had to be drilled bigger, and the screws that pull the handle plates together are 12mm too long, and tbe square key had to be cut down 12mm also, very frustrating install for $15k, my boss saw the bloke from the instruction videos at ibs and told him to get fucked

these Are a nightmare to install the instructions are worthless, some holes are pre drilled some weren't, the recommended clearance was way off after weather stripping was installed, had to completely re install to be able to close the door latch, the top of the panels rely on plastic blocks that have the magnet inside, I would have made the blocks aluminum, the door latch itself is built into the door, but the thru holes I door for handle weren't in correct position to allow handle plate to mount to the door, thebholes had to be drilled bigger, and the screws that pull the handle plates together are 12mm too long, and tbe square key had to be cut down 12mm also, very frustrating install for $15k, my boss saw the bloke from the instruction videos at ibs and told him to get fucked

Residential only ADA non compliant ruclips.net/video/x0QwmN_DCFk/видео.html

The best thing ever

Where can I find in Germany

Would you mind telling us where you got them from and how much? Do you get snow where you are?

Fuera tu ventanas ??

Hi tu bonita ventana ok está bien

THE DOGGIE IS LIKE, I JUST WANT TO COME IN FOR MY NAP.❤

How about the mosquito screens

Can you deliver in The Netherlands?

Please love it if can be opportune this company

Good day Am Mr Daniel Amehson a fabricator I like working with this company🎉🎉🎉🎉wow Am from Nigeria i have full passion for this Door and company producer

Are this door aveleble in the USA

Very nice doors how much is the price

are this available in Virginia woul like more information

How much price 5 meters

We had these doors installed 4 years ago and although I am generally pleased with them we now have a serious problem with one master door. The door it has dropped so we can’t open it at all. Although the doors came with a 10 year guarantee the company has gone out of business can anybody help me find someone who will be able to repair it. Many thanks

Whats the cost of a door like that? Plus install? Roughly. Thanks

Nice door

Are these double Pain

How do you screen the doorway? Mosquitoes are real

hllo Robert you intrduc very well fot bi-fold .i want to about this production. have you whatsapp numbet. may send paroduction catalogues for me. Thanks a lot

Can you have automation for this system and integration with smart devices like smart door lock , access device etc

That’s a lovely accent you have…New Jersey?

Sangat mewah pa bos..

I love how their locks always go bad and tracks get bent from the weight >:(

Hi Robert , I just got my door. I'm curious to know how you waterproof the door during the install? Did you use, peel on flashing?

The doors look aesthetically nice, but are they strong? And where is this?

can I get this doors in South Africa? pls help I wanna install it at my place?

am trying to get the bottom rollers for this type of door any suggestions would be appreciated

I’m in Hayward California do you have a contact here ?

I an interested this product Tex Spmomin@iCloud.com

Are these available in the US?

Hey where did you buy this one?

Gone bust!

Dako has cheap options for partio doors, I can suggest checking them out.

Bugs???

Sir How can I contact you

Nice