Видео

and fill coolant level too

and the fuel filter, you should put it into the cap, and then screw it on.

and you don't need to prime it. its a self bleed design

wow, ok🤦🏻‍♂️🤣

not necessarily, they weren’t slippery at all and had no problem braking since 😄regards

just eBay, but wouldn’t necessarily recommend as it is painfully slow

that will be on the next service I’m afraid😀but all you have to do is: you got three fuel lines going into the fuel filter. you leave the one in the middle out and then press on the little piston on the top of the fuel filter to prime it. once you got fuel coming through the line you left out, you connect that line too and you’re done

Thank you for your comment. The reason why I did not use the bleed kit to prime the fuel filter is because the hose from the prime tool and the fuel line were not fitting with eachother😄I mainly put the cover back for the video, but I have test drove the car to make sure it’s all good

@@sCARs20 ah makes sense 😎

is there any rust on the piston? dont know what you mean by “oroud”

@@sCARs20 the face of the piston had some rust on it that I cleaned up. Shouldve read the piston 'the piston is slightly proud' sticks out 2mm or so from being flush

that 2mm shouldn’t really make a difference. what did you use to push the piston back?and is the rubber seal that covers the piston intact?

@@sCARs20 the seal is in good condition, but unlike when I did the front brakes and moved the piston, the rear one didn't move. I'm gonna have to have another look at that and double check otherwise there's definitely not enough inside the caliper for the pads and disc. Should there be much movement of the piston?

@@sCARs20 i tried to move the piston back but it wasnt budging.. i was going to get hold of a brake piston cube to see if it had any further back to go. im guessing i cant use a screwdriver to lever it back like i did the front brake piston?

Hi there, no not yet but according to other RUclips videos there is a method to wind the electric motors back😃

@sCARs20 check your owners manual pls. My avensis is also 2013 model but it didn't come with the owners manual.

there’s an online owners manual which is free but it won’t tell you how to wind the electronic handbrake motors, but I have seen it on RUclips for other types of Toyota which should work

hi there, yes I do, I’ve got it up for £9200 including a full valet or £9000 without😁

Hi there, I have drastically reduced the price if you’re still interested as I need to make room for a new project😀

there was no metal shavings in the oil🤞🏼🤞🏼and you can also tell how healthy your gearbox is by the oils colour-if the oil is dark🤯. my oil was fine, and to be fair I haven’t noticed a significant difference but at least my mind is at ease knowing that I have new oil in my gearbox😀 I paid £25 for liqui moli whereas the Toyota one would have been over £50 and I did undo the filler cap whilst the old oil was draining to help the old oil clear out. Regards and good luck!

@@sCARs20 thank you

if you’re looking for a s…t car that just drives over and over again, this is the best buy🤣

I agree, although I wouldn’t keep a canister of fuel just for that, so I thought I’d try something that should do it just fine, only that my better half got the buttons all mixed up🤣🤣

I did mine 3 years ago so thought after 3 years it was due again. I just put £5 worth of fuel in a can.. only problem I mentioned it to my stepdaughter her Kuga has never had one and it's 5 years old so guess what I've got hers to do. Only bit I find a pain is the fuel pips clips scared to bust them 😂😂 mines in for oil change and MOT in the morning. Oh recommend a stage one remap goes like stink 196bhp. Tows my caravan well 😜😜 more smiles per mile now

Deffo, I think it does pull nicely, only drove it briefly but quite please. And to my surprise it does a better mpg than my Avensis, which is hard to beat😳

Technically, there is no such thing as a mk2.5 this is a Mk2 facelift 😄

Yep but everyone calls them mark 2.5 😜

That's useful to know. Front discs already done last week, rear discs next.

You’re welcome 😁

there’s a way of doing it as described in the video, no need for a computer😀and you can hear the pistons retracting, then you’re ready to do the job

Thanks 👍I try my best😄

Thank you!😀

Greetings! Yes, the US do get different names for some cars compared to their EU twin😄

Yes @@sCARs20, Do Also I Haven't Seen The Ford Escapes with Manual Transmission Yet Though, I Only Seen with Automatics Right Now.

I would think that manual transmissions are a rare breed over there😀

Oh OK.😉 No Worries. Anyway@@sCARs20, I Since You're Working on Your Ford Kuga, I Post You A Link For You and It's For Ford Escapes and Kugas Too., It's From "Chrisfix" And I Think You're Gonna Like It. ruclips.net/video/brofphmC7GI/видео.htmlsi=jPoKT1wpi5_MKAZV

thanks for that!

I was thinking to change the box altogether, but I suppose that trying that first wouldn’t harm. Thanks a lot!

​@sCARs20 it's possible that it may be too late and it be worse than just changing fluid. Also forget to mention that I am across the pond and have a US spec Fiesta ST but I wouldn't be surprised if the same type issues are inherited in ford's international vehicles

I’ll first try to drain the oil, and take it from there as I’d first like to see whether the level is indeed lower. Regards

It might depend on the brand used, as the ones I used were quite abrasive and didn’t feel greasy😃

The discs i bought it specifically said there is no need to degrease discs.​@@sCARs20

that factory grease burns out fast

Some brands don't use grease, They have a coating that rubs off soon as you start braking.

Hi there, I believe you haven’t read my channel description, then you’d know why I’m doing it for😀

I agree, they are good cars, the 2 liter diesel is quite nippy, but the interior really shocked me with its boredom 🤣

Thanks for the info, you live and learn I suppose

@@sCARs20 Thank you for the video, please do more with this car! 😁. Good job and stay healthy!

@@dl.rautate To be fair, there’s nothing much more to do with, still waiting to be sold and I’m looking forward to the next project🚘🚗

Yes, that’s fair, I suppose it wouldn’t suit someone that only does driving around the city, and needs it for motorway also.

I will double check with the garage after new years whether I would be ok to MOT it, or whether I can only do it one month ahead😀I don’t mind MOTing it before sale😃

@@sCARs20 Just thinking with 12 months mot it will sell quicker, you can mot a car at any time it just starts the 12 month cycle from the day you mot it.

Brill, thanks for the info, I will deffo sort that out, same as I did with my two previous projects😃