Видео

I couldn't get them to map. The HDMI cable should trigger your device & tv on. Mine does & then it gets messed up sometimes & will turn only the device off/on. But the Firestick remote is far better.

That's what happened to me. I was happy with it the first couple of times & then I wasn't happy with it. You're welcome. I'm glad it's of help.

.177 Daisy Quick Silver 7.5 to 7.9gr depending on the pellet.

IDK stupid if you ask me& is why I made a video on how to remove the dumb logos. But it's a good gun knockwood. Just shot 500 cheapo pellets threw. Just be sure to take it apart & clean all the screws from the ridiculous amount of oil on them & then add a drop of blue loctite. My main M6 1.0 bolt fell out & I didn't know. Ended stripping & bending the M4 .70 screw on top. If you get one.

The remover only removes the logo. The logo whatever it is stamped/painted with is very much on there. In daylight I was still able to see it so I used a toothbrush & did it again. There is no trace of the logo & the black plastic isn't discolored or melted. Don't let the remover on after brushing. Make sure to wipe it off asap.

It looked good on my camera screen. If it hadn't I would of corrected it. You can always download the video & brighten it up. You're welcome

It’s great, I was just giving you a hard time. I had given up on fixing mine, but got it working thanks to this.

@@TheFotogeek Not a problem. I get discussed with so many videos that come out dark but yea I loved this keyboard. They don't make em like this anymore.

are you kidding me 😑

Paint not only will not match but it will come off.

@@TheCleaner6969I see, but what is this object anyway? airsoft?

Color matching

@@James13234 It's a high powered pellet gun. Removing the logo is merely for looks for me. I don't like company logos that are printed all over. I prefer the look of a real rifle or as close to real as I can get. Ammo is too much these days & I want to save mine in case things start up.

I'm not sure on that one. I would call Ryobi & ask to speak to service. Hopefully they'll put you through & not just tell you to take it to a service center. I wish I could be of more help.

you were very helpful i will figure it out. Thank you

@@ratfinkron5793 Your welcome, & thank you. I always try my best to help others.

Yes it can be done. The one in my video is stainless. They don't want to do it because stainless is very strong & it takes time & they probably don't have a strong enough vice & tools. Depending on how heavy & tight the links are, it will take some force & possible have to be filed & polished.

It was real lawn and garden bullshit. The drive belt was a made man and shanep5121 wasn't. He had to sit still and change it

@@avocadotoast9489 awesome

You're welcome

If the phone is Android it should for all phones

Sometimes you need to twist the transistor so all legs are touching

@@TheCleaner6969 Sometimes I can get a split second reading doing that. I have a DT-830B m.m. Identical to the Cent-Tech without this problem. Mouser has replacement sockets if I feel ambitious!

@@TheBlackbelair Honestly it's probably cheaper just to buy a new one. The HB socket isn't the best.

I'm close to Jersey lol I'm glad it caught your ants but the main thing you want is them to take it back to the colony & kill the queen. I tried the bottle outside in a dry mix but the ants didn't want it.

@@TheCleaner6969 yea that’s true

You're welcome

This guitar isn't worth buying anything for. I just went to Lowe's or Home Depot & bought a small can of ebony stain.

You're welcome. I'm glad you found it of help.

I think they made several versions trying to correct the horrible design.

@@TheCleaner6969 Correction, my lt1045 has only one adjusting nut not two. My bad.

Here is the video explaining that. Since that video I was told that front pulley does come off. ruclips.net/video/muoLq039yQw/видео.html

Here is what it sounded like before I did anything. On my tiktok channel if you search I believe I played a little piece of the lesson along with the song. YT flags everything & tiktok is starting to follow. ruclips.net/video/rNkj_04S2Oo/видео.html The tone & sound were pretty much the same. I did this because is was unplayable.

You're very welcome.

You're very welcome

You're most welcome!

Sure as long as it has a 1/4" TRS in/out you can go into the front end of the amp.

@@TheCleaner6969 Thanks !!!

@@sabantuy1 You're welcome!

I like them a lot. They are just as good imo.

@@TheCleaner6969 Thanks most appreciated 👍🏼

@@benligil You're welcome!

Hi I'm glad I was of help. It's a great amp. I don't understand the hate some gear gets. This amp sound big, it's loud & has great tones. You're welcome & keep tickling those strings! \\m//

Before you use what I did make sure you match the bit to the screw by holding it to the light. The body or the bit should only cover the body of the screw (Not the screw threads) I used a #53 bit.

You're welcome

I could not find a exact replacement but comparing my Ibanez & Squier they were very close so I put the Graph-Tech PT-5000-L0 on. The Original Ibanez Nut Measurements for my Gio is 1.663 x .120 x .174 ( The .174 which is low. I couldn't get a 0.015 feeler gauge under high e) My neck radius is (9.5 radius). I'm not sure of the string spacing. I would buy just a cheap guitar kit off Amazon so you have radius gauges. I have a video up how to make nut files out of feel gauges. The Ibanez models I did were: GRX70QATBB (Righty) GRX70QALTBB (Lefty) If you're getting fret buzz you need to make sure you check the nut height at 1st fret. By just placing the feeler gauge under the strings. It should not lift the string & you should feel slight drag. If you see light that means your nut slot is high. You can buy feel gauges at auto part stores. Nut slot height should be between (.018 to .024) I like to stay a little on the high side personally. I hope this helps.

It's worth noting Ibanez did change neck radius as Sweetwater gave me the wrong info as did Graph-Tech for mine.

@@TheCleaner6969 Thank you, yea I had no idea where to buy those measuring tools so that’s very helpful knowing now that I can buy them at an auto parts store so then I can actually get accurate measurements to see what’s going on and what I need to fix.

@@TheCleaner6969 yea that’s what I’ve been using to try to find out the exact measurements from my stock Ibanez nut piece to this Graph-Tech but I just bought. I didn’t glue the nut in I just slide it in and left it like that. But it seems like the original right handed nut goes down at a rounded angle and the left handed graph-tech nut seems to be flatter than the original nut. Also when I was trying to see if my strings were touching the frets up at the 1st fret, I noticed a tiny bit of light coming through the new nut I put in..like the nut doesn’t fully fill in the nut space. At first I was thinking that maybe because I didn’t glue the nut in that it was making the nut shake/vibrate and making my open strings buzz and hardly any note that you can hear. But I tried holding down the nut tightly as I strummed the open strings but no difference in the buzzing so I don’t think it’s that that’s causing the issue. I was wondering if maybe if I raise my strings a little with a truss rod adjustment, if that could help with the buzzing on the open strings? But from like the 2nd or 3rd fret down the guitar feels and sounds perfect and I can actually bend my strings a full step and not feel like the strings are going to break or pop out like my cheaper off brand guitars it’s just those open frets that’s my issue

@@DblakeDeathMetal89 You're welcome. If you have a Harbor Freight you can get the feeler gauges there for under $5.00. I seen people do it by eye & ear by fret the 3rd fret & tapping but I much rather measurements when dealing with thousands of an inch.

I'm sorry you have that problem

I first tried starting at the highest position but it never stayed on. I also tried bending mine I couldn't get it to stay on.

@@TheCleaner6969 maybe i just got lucky ... for once .

@@billsmith1770 That's always a welcome thing! I'm glad you did. You saved $ & a lot of time.

I'm not sure I don't run this system anymore.

You're welcome! I'm really glad you found it helpful.

I'm glad to hear that & you are most welcome :)

Very close

Thank you! I'm glad it was helpful. It does add some sustain.

You're welcome