Видео

Lopez Mary Johnson Anna Miller Helen

Garcia Larry Taylor Kevin Anderson Lisa

So mine that I bought on eBay used would not connect to each other despite having the exact same settings. I’m using mission planner and mavlink telemetry by the way. I connected each separately via the USB FTDI adapter supplied for the ground side. I noticed that the firmware version was different. One was 3.16 and the other was 3.57. I tried flashing firmware using the SIK radio setup in mission planner but it didn’t work. So I went to the RFD website and downloaded their configurator. It was actually easy to download and I was able to flash both successfully although the first attempt failed at updating the older version. It kindly asked me if I wanted to try again and the second time it worked! I had to point it to the location of the firmware, on my hard drive as it cannot flash over the website. On the rfd website there was two different firmware file types for 3.57, one was under the category of version 1 hardware and the other was under version 2 hardware for RFD 900X . My radios both looked identical and looked new, however i found that the configurator would not even allow me to see the newer version of the firmware that I had just flashed for one of the radios, when I tried to flash the second one. But once I downloaded the older version of the exact same firmware version for older hardware, it saw it and was able to flash it successfully on the second try as mentioned above. Once I did this, both were reset to default settings and connected very easily. Make sure you use the right com port and baud rate for mavlink, 57600. Cheers!

Hall Ronald Jones Donald Young Jeffrey

Just what I was looking for, thanks for sharing 😂

Great video! I have a hard time understanding what amp i should use. Have 3s 5600a 70a how do i calculate it?

Hello, Great Video ! Can we control zoom and gimbal through telem2 pixhawk 2.4.8 ? My plan is to connect to raspberry pi and be able to control gimbal over missionplanner

1:36 does FTP mean fuckthepolice?

Useful video

How did you bypass Radio configuration? In the video it seems to be disabled and you are instead controlling it from the computer. I want to achieve the same thing.

how to make the camera's inital position to point downwards

connection failed.

Hi, i am used to modify directly ardupilot (and then doing my own build). What are the advantages of using lua scripting ? is there anything i can do with it that i can't do by editing the ardupilot code ? ty

i cant find MNT1_type can you help me for that

Can i write a code like if i want to give a goto command to drone for moving the one location to another?

In the beginning QGroundcontrol asks which for which firmware I am using the program. I could choose between PX4 Pro, Ardupilot (Default) and Mavlink Generic. You don't show that. Why is it asking that? What if I run different kind? I cannot find settings to change that.

Thanks for the video! Are you able to communicate/control the SIYI A8 mini fpv Camera via custom code?

Left my radio usb plugged in, clicked on firmware and it updated my radio, then I lost connection😂 I think usb hubs are a big issue for me on my MacBook and USB C ports.

Hello, Thanks. How do i map f310 buttons for camera trigger in Ardupilot for the A8 mini?

Thank you great vid

P r o m o S M 😀

How can i manuali link the air unir pls help

i did lost conexion how can i fix it? pls help!!

Why did you not get a close up of the wiring.

Good Video. Very well done. Thanks

i am getting failed to enter command mode i am using 3dr radio telemetry with 433MHz

Ivue. Good evening. nice drone~catch you later~ 🙃

I did the same steps but it failed

This video is quality. Best I've found on the topic. THANKS. Keep up the good work, you'll get rewarded for being such a good teacher on such important topics the future will heavily rely on.

Suppose you build an ornithopter that flies with more than one motor in a non-standard way. Can I use Ardupilot? Or should I use other software?

Thanks for the video and information. Have you tried to control de zoom? How was de live video transmission?

Thanks for the info. I have only in the AMP directory CTRL _ BAK & TERRAIN. What do I have to do to install a LED Lua script for example?

Which is better??? QGC OR mission planner?

Hi, is it possible to simulate without the connection on a drone to the Qgroundcontrol after planning like on Mission Planner? Thank you

hey! great video but do you know anything about the gimbal ACC calibration on the siyi assistant app? the camera i'm working with never sits still, it's constantly yawing left and right (very minutely) but still a bother

Hi, I have 2 RTK modules on my drone (I use it with the mission planner). Is it possible to use these sensors in Qground control?

Hey, nice job! I'm currently trying to connect a Pixy2 camera to a FMU, but it's not detected ( I checked with the i2cdetect command on QGC). I setup the cam with PixyMon, checked the wires, change camera, ... I have no idea anymore, I don't even find something on forums

can we connect crazyflie to QGroundControl?

Nice Video

Nice and simple. Would you have a video on how to configure the system to a fixed wing airplane?

great video, thank you. can you tell us which frame are you using?

Hello i have a problem with battery status of my quadcopter the battery status is: "OK" and doesn't tell me any specification, and because of that i can't calibrate my esc on qg ground control, if you have any idear for resolve my problem. Ty !!

Great video!

Epic music ;)

Fish for dinner!!