Видео

This is an excellent channel, I wish I could have forced my hand not to click subscribe, but it did sadly. Would you be at all interested in reviewing the Video 2 Mac capture device? It aims to do the seemingly impossible and capture analogue video to newer Macs through OBS affordably. I have no idea if it does this well, but the device seems to be the only one beside the Elcrappo which looks after us Mac users. I'd be fascinated to see your take, and may even consider unsubscribing in a fit of gratitude...

Thanks a lot for the recommendation !! I had bought an Elgato one but I decided to end it back to Amazon... and ordered this japanese one... Problem is I don't know to capture Pal VHS using OBS... could you record an small (or not) video explaining how to? I'd appreciate it a lot !! Thanks for your work !!

solid gold humour, cheers for that. For me the best option looks to be SVHS -> Videonics MX-1 -> Retrotink... theres gotta be TBC in there for those old tapes...

I subscribed instantly. After watching for a bit, I feel that might have been a mistake.

When it comes to setting the levels/proc amp, try using Virtualdub2... enable capture mode, select your device, then select video/histogram. Now select video/cropping, and crop any black borders and save. Black borders will give false readings for the histogram. Now select video/levels... move Brightness until the left side of the histogram is close to the left edge, but with no red bars. Now adjust Contrast until close to right edge, but again, no red bars. Watch as much of the video until you're sure you don't creep into the red. There's guides on "Virtualdub capturing" that explain it better. If you continue to capture with Virtualdub, are sure to set cropping back to 0's. Personally, I use AmaRecTV to capture... Virtuadub gives me sync issues in Windiws 10. Also, I'm curious about the USB3 model... it has component video input... I'd like to try connecting my SVHS player to my DMR-ES16 player/recorder through svideo, but output to the Startech using the DMR-ES16's component out connections, then capture direct to RGB. Curious how the quality would compare to standard YUV captures through svideo.

my regal dude, how are you running a clean line out of the composite on the blackmagic & capturing back in at the same time? I can't get resolve to send anything out of the composite, which is insane. I can run a clean feed to my bodgy hdmi to av converter, but not from the BM4K

The software for Elgato installs incompatible drivers which means you have to turn Memory core isloation off. It's a pain in the ass to uninstall Elgato drivers to get memory core turned back on.

Another Tour de Force as always. Leather, Barge Cement, and Scissors (oh and common but hard to get material).

Will Elgato work with apple silicon Macs?

Wow, this is the most mythical of channel pulls...seriously brilliant video. I am subscribed forever!

Thank you Christopher Hitchens disembodied voice from beyond the grave. This video was very informative.

Reasonably: How to glue? GPT4: seek professional mental help 😂💀

Hello Reasonable Human, have you perchance ever had a look at the Hauppauge USB2Live dongle? It would be interesting to see how it compares to this StarTech one.

I am triggered. It's Aluminium as all us Yankees know. This too is a football, see: ⚽

How about Pinnacle Dazzle DVC 100? It still works on modern computers, and it still popular.

I'm still holding out for an Illudium Q-36 Explosive Space Modulator. I have a search saved on eBay - fingers crossed!

As a huge DU fan appreciated the Shock-G

Thank you for the exceptional tutorial, I am going to replace the battery on the Ludlum 2401-P Geiger Counter too when I get one, just to eventually acquire it and find out that I had been living all my life in a highly radioactive area, and be reminded daily of my most probable imminent death by a broken mode switch in said device that causes it to constantly beep its gradually ear-piercing sounds into my ear canals.

2.50 sonic soundtrack

Technologyconnections came to a similar conclusion that converting to HDMI and then capturing the digital signal produces a superior result. He didnt even use a fancy upscaler.

So rarely is there actual entertainment in the reviews of this niche weirdo hardware, this was awesome, thank you... BUT

I capture my analog video in the most exquisite way, by running the the signal into a blackmagic analog to sdi into a blackmagic video assist into prores 422hq and then printed on 16mm Kodak Vision 3 500T 7219 film via an arrilaser and then scanning it back on a lasergraphic 6.5k HDR, truly the best quality.

I want one. No, no, no, I want two. For stereotronix.

Weirdest review ever, love it

This has got me thinking,... 🤔 Maybe it's time I _did_ buy some that there Barge Cement ⛽, as long as I wear a P100 respirator I should be fine. And I can watch Nemesis whilst gluing all the leather bits together. 👍Sounds like plan. And no chance on the subscriber count going down. I'm sharing this with all my 50 yr. old GenX friends yo!

This was SO GOOD. I too, love certain episodes that the majority seems to dislike. Example: DS9's "Move along Home"=REAL Star Trek. I know EVEN the actors didn't like that one, but I did. I'm SO glad I found you. Subscribed.

What the hell have I stumbled onto, here? More, please.

i Like the tone, it reminds me of the unreliable narrator element in Douglas Adams writing. A little heavy on the splash graphics and audio though. many thanks. by the way, i subscribed just so i could unsubscribe as directed... just doing my part.,

This was brilliant. You have earned MY click...this time.

The guy who played “Brone” in this episode is Canadian and had a prominent role on the most Canadian of Canadian TV staples “Road to Avonlea.” But you labeled this most Canadian of Canadians an American and that messes with my brain

I liked this episode too. And FYI, there is an episode of the (unfortunately Canadian) 90s Outer Limits TV series called “Hearts and Minds” from around the same time that has a similar plot. It’s a darker tone with some decent twists and turns. It’s worth checking out

Majel Barrett will always be Mrs. Star Trek to me.

I got really into Trek in 2006 when G4TV picked up TOS...It took maybe 3 episodes one Saturday and I was hooked. I had always watched TNG with the family as a wee-lad, and watched the TNG movies as they came out. But I hadn't watched DS9 until a little over a year ago...and HOLY SHIT. Bro TELL me Ben Sisko isn't a MADD Ladd😆💯🖖

You tire of trawling amongst an ocean of dross on RUclips. And then you find this channel. I love it. But, I really don't know quite why.

I say, it was about time you released another video as just the other day I was perusing the RUclips for some reasonable entertainment when I nearly lost my footing over the enigmatic void that is your presence.

Once, he was reasonably British. Now, he is reasonably mad.

and to think I stumbled upon the greatest channel on RUclips because I just wanted to digitize some tapes...

Dear lord the production is outstanding. Well done, old chap.

and unfortunately horribly digitized videos will still be a thing forever, people are always happy with crappy pixelated transfers.

Step away from the glue! You have no idea what you’re doing! Very entertaining and informative.👍👍

I am reasonably certain an astute gentlemen such as yourself had no issue witnessing this momentous event unfold with your own bitter gaze, although I suppose it would be remiss not to confirm it. You have indeed finally successfully accrued 1000 subscribers. It is common on this video sharing platform that this epic milestone is celebrated in a special video, and I encourage you to do the same. However, I would never intrude upon another fine sir's business matters; I leave such choice to you.

Genius video

I’m guessing you got a North American model, possibly from Canada.

Does any of this use a Time Base Corrector?

Recently discovered zelikovitz water based adhesive. Wonder how it will stack up.

Great video! now if you had the gv-usb2 in the mix also it would have been the perfect video

Thanks for including the bounce clip to keep our attention

I've got one of these (though without the component option). I, can't say I know how to actually use it appropriately either, but you can actually use it to compare different TBCs with the different Jitter measurements. Jitter is off the charts without a line TBC. The other feature I plan to use is playing a color bar VHS tape through different VCRs and seeing which VCRs reproduce it most closely to what the VM700T is expecting and that can be compared to the pattern generator that created the test tape.

Tek's self tests that it completes before it starts up are really important. The tests are there because you have to rely on it's measurements it's taking, this is actually really important if you were using a machine like this to develop and/or test products. It also can stop further damage to the machine if something is wrong, hence all the relay switching. It was also a way for you to know what's wrong and what to replace and/or service. Tek gear was designed to be completely serviceable by the owner. IDK about new gear, I only really know about 80's and 90's Tek stuff. Don't be afraid to run the extended diagnostics, It's not going to destroy anything, it will only tell you if something is already dead. It contains even more glorious 80's/90's ka-chunk and clicking relays. Back then, Tek stuff was built with extremely high end components for the time so it's no wonder why gear like this is still working. I would be willing to wager that they will continue to work for many many years. Yeah equipment like that would cost as much as a new car. A VM700T with no options was around 22,000 usd (late 90's - 2000ish) when it was being sold. (oops should have kept watching) Oh yeah, Tek and other test equipment manufactures also had touch CRTs back in the early 80's, my Tek 11401 and Tek DSA602A have touch CRTs. They used IR leds if memory serves me correct. Also test gear needs time to warm up, idk about the VM700 series stuff, but my entire 80's-90's Tek lab (12 or more machines) all need around 20 or more mins before a measurement can be reliably used, obviously the machines work before this warmup, but yeah generally you'd boot your test gear in the morning and let them warm up before you got started working after lunch lol. I think the reason it's "animating" is not really that it's an actual animation but rather a consequence of the machine directly controlling the CRT beam. You wouldn't happen to have the VMREMGR - Video Measurement Remote Graphics software, or the VMT - VM700T Remote Control Software would you? (I think 3.5" floppies but might be on CDs) If you do, can you please upload it to the internet archive? There's a large group of people archiving all the older Tek software and PROMs. We are trying to keep these machines working, bring even more machines back from the dead, and allow people to use the machines to their full potential. Tek actually encourages people to do this archival, which is really cool and not like many companies. Cool stuff, thanks for the trip down memory lane and thanks for keeping this beast out of the dump.

Damn this thing would belong in neon Genesis Evangelion if it were yellow/orange