Neudorfer Farm
Neudorfer Farm
  • Видео 49
  • Просмотров 34 322
55 gallon drum diesel storage tank with drum pump
Drum I got for free from a local heavy equipment shop. They throw them away; good to save from going to the landfill.
Drum Pump: www.amazon.com/dp/B0CDP1TH89?ref=ppx_yo2ov_dt_b_product_details&th=1
1" ID x 1-1/4" OD: www.amazon.com/dp/B0CJ2FR8NS?ref=ppx_yo2ov_dt_b_product_details&th=1
hose nipple with 1" barb end x 3/4" MIP: www.homedepot.com/p/Everbilt-1-in-Barb-x-3-4-in-MIP-Nylon-Adapter-Fitting-800319/300862725?source=shoppingads&locale=en-US&pla&mtc=SHOPPING-BF-CDP-GGL-D26P-026_001_PIPE_FITTING-NA-NA-NA-PMAX-NA-NA-NA-NA-NBR-NA-NA-NEW-PMax_BHU24&cm_mmc=SHOPPING-BF-CDP-GGL-D26P-026_001_PIPE_FITTING-NA-NA-NA-PMAX-NA-NA-NA-NA-NBR-NA-NA-NEW-PMax_BHU24-71700000097492030--&gad_source=1&gbraid=...
Просмотров: 361

Видео

Welding on brush hog...again
Просмотров 842День назад
Welding a crack in my brush hog. I don't have electricity at the farm yet so I use my generator and a small 90 amp mig welder from harbor freight.
Brush Hogging with subcompact tractor and 5 foot brush hog
Просмотров 8 тыс.14 дней назад
Top link is a spare S.306: us.sparex.com/top-link-cat-1-1-ball-and-ball-1-1-8-min-length-16-1-32-306.html Massey furgeson GC1723E tractor
Top dressing gravel driveway with limestone fines and 2A
Просмотров 40814 дней назад
My attempt to tighten up the loose gravel on my driveway. Also filling in some low spots.
Building a Pond Part 6 - finishing touches!
Просмотров 36528 дней назад
Open to any recommendations to improve the design or construction before it fills up. Thank you all for watching the 6 part series!
Welding a crack in my brush hog
Просмотров 174Месяц назад
Welding a crack in my brush hog
How to fix a flat spot in a flat free tire
Просмотров 167Месяц назад
How to fix a flat spot in a flat free tire
Installing new wheel bearings in Haul Master 13 inch Harbor Freight Wheels
Просмотров 188Месяц назад
wheel/tire: www.harborfreight.com/13-5-32-inch-x-3-7-16-inch-flatfree-tire-67469.html Bronze Spacers 5/8" to 1/2" I bought on eBay and the listing is no longer active but search this: (Lot of 4) Bronze Bearings Bushings .500 ID .6265 OD 1/2X5/8,1/2X7/8 New replacement Bearings: www.amazon.com/dp/B01MR04W5K?ref=ppx_yo2ov_dt_b_product_details&th=1
Millennium Treestands Q200 Buck Hut Shooting House
Просмотров 279Месяц назад
millennium-outdoors.com/product/q200-buck-hut-shooting-house/
Pitcher Pump Repair
Просмотров 139Месяц назад
I bought this pump from Rural King for around $40. I think they are a bit more now. Fleet Farm was the lowest price that I saw this evening while looking them up before posting this. From what I read before buying one of these is that they are not designed for a lot of elevation draw but mine is over 25' from the water to the pump and no issues. Just a little hard to move the lever due to more ...
Building a Pond Part 5 - grading dam, spreading top soil, seed and straw
Просмотров 337Месяц назад
Steady progress on the pond!
Broken hand rake - let's make it better
Просмотров 484Месяц назад
After over 10 years, my rake finally broke. I weld it back together and add a grading blade to the top.
Building a Pond Part 4 - Installing french drains, cultivating and seeding
Просмотров 712Месяц назад
Building a Pond Part 4 - Installing french drains, cultivating and seeding
Installing Sump Pump Piping and Drain Pit - Subcompact Tractor
Просмотров 301Месяц назад
Installing Sump Pump Piping and Drain Pit - Subcompact Tractor
Building a Pond Part 3 - Removing trees from dam, duck box and planting seed
Просмотров 171Месяц назад
Building a Pond Part 3 - Removing trees from dam, duck box and planting seed
Building a Pond Part 1 - Site Prep and Excavation
Просмотров 396Месяц назад
Building a Pond Part 1 - Site Prep and Excavation
Building a Pond Part 2 - Outflow Erosion Control
Просмотров 2032 месяца назад
Building a Pond Part 2 - Outflow Erosion Control
Total Archery Challenge at Seven Springs, PA 2024
Просмотров 952 месяца назад
Total Archery Challenge at Seven Springs, PA 2024
Installing a residential driveway with subcompact tractors
Просмотров 3492 месяца назад
Installing a residential driveway with subcompact tractors
Installing a new roof and adding a lean to
Просмотров 1652 месяца назад
Installing a new roof and adding a lean to
Trailer Restoration for on the Farm
Просмотров 8212 месяца назад
Trailer Restoration for on the Farm
Cover Pro Car Canopy Update - Wind damage
Просмотров 3672 месяца назад
Cover Pro Car Canopy Update - Wind damage
Planting Garden and Finally Testing our Irrigation!
Просмотров 762 месяца назад
Planting Garden and Finally Testing our Irrigation!
Landscape Maintenance - Trimming
Просмотров 3382 месяца назад
Landscape Maintenance - Trimming
Travel to India with business class on British Airways
Просмотров 562 месяца назад
Travel to India with business class on British Airways
How to plant tree seedlings for future transplanting
Просмотров 3173 месяца назад
How to plant tree seedlings for future transplanting
Prepping our garden with 48" tractor tiller, 11" electric Greenworks tiller and hand rake
Просмотров 6053 месяца назад
Prepping our garden with 48" tractor tiller, 11" electric Greenworks tiller and hand rake
How to Change Oil in a Rotary Tiller - Titan Implement 48" Tiller
Просмотров 1043 месяца назад
How to Change Oil in a Rotary Tiller - Titan Implement 48" Tiller
Finish Mower Restoration, Caster Repair, Gearbox Oil Change and Assembly - WAC GM-RD60 Part 3
Просмотров 1,1 тыс.3 месяца назад
Finish Mower Restoration, Caster Repair, Gearbox Oil Change and Assembly - WAC GM-RD60 Part 3
How to Fix a Paw Patrol Broken Umbrella
Просмотров 323 месяца назад
How to Fix a Paw Patrol Broken Umbrella

Комментарии

  • @stevesperbeck576
    @stevesperbeck576 8 часов назад

    Why all of the backing up ???

  • @hubertrobinson8825
    @hubertrobinson8825 7 дней назад

    A little more juice wouldve get the job done but i am not complaining i cant see it from where i sleep. Good job you did what you needed to do to stop it from getting worse try thightening the loose bolts even the nut on the main shaft maybe adding another flat washer if posible then you get the wobble when it hits anything and you will even get a clean cut too

  • @ruedaricardo
    @ruedaricardo 9 дней назад

    2KVA for 90 amps is too little. My 150 amp inverter needs a 10KVA generator.

  • @brad7670
    @brad7670 11 дней назад

    Looks great! The GC's are amazing little tractors. People are shocked at work I've done with mine.

  • @kenday4158
    @kenday4158 12 дней назад

    Where is your ROPS?

  • @darrenmccomic7325
    @darrenmccomic7325 13 дней назад

    Drill a hole in the back of deck to let the water out

    • @NeudorferFarm
      @NeudorferFarm 12 дней назад

      I thought about doing that but then the water will get on the underside of the deck where the paint gets worn off and increase the corrosion rate. I will take your advice and try to drill a horizontal hole through the flat plate that frames that section; as close to the deck as possible. Just not sure I can get the drill close enough due to the chuck. I’ll make a short if I can make this work. Thank you

    • @georgehughes8698
      @georgehughes8698 10 дней назад

      ​@NeudorferFarm buy a longer drill bit it will allow you to get closer to the deck at a slight angle, or a snake drill might help you get tighter to the deck. get

  • @darrenmccomic7325
    @darrenmccomic7325 13 дней назад

    You can take a torch to lower the therd arm and get more lift.

  • @LivingCommonSense
    @LivingCommonSense 13 дней назад

    Good video, can the music, I'd rather hear the tractor run

    • @NeudorferFarm
      @NeudorferFarm 12 дней назад

      Thanks for the advice, I agree with you. The only problem is when the speed of the video is increased, the tractor sound gets distorted. At normal speed, this video would have been over an hour of footage, so I sped it up and added music since the normal audio is no good at high speed. Any idea how to solve other than posting long videos?

    • @LivingCommonSense
      @LivingCommonSense 12 дней назад

      @@NeudorferFarm Get a couple of cameras, preferably the same brand/model. Set the 1st camera up on a tripod to grab the whole scene; use the second to get different angles, get closer or onboard the tractor/mower shots. While editing, use the 1st camera and its sound track. Lay the 2nd cam footage over the top and mute its sound. Then alternate between the two, taking the most interesting "shots" from both. If you have help, you could mix in a drone shot from time to time but its not necessary. Play it all at regular speed and it will sound right. Cut out boring parts if it gets too long. The shots taken on the tractor will sound the same because it will still be the sound from the 1st camera. It doesn't have to be the same model of camera but the video will stay sync'd better if it is. Different "cheap" cameras will likely become unsync'd as the video moves along and you'll have to resync them.

    • @NeudorferFarm
      @NeudorferFarm 12 дней назад

      @@LivingCommonSense awesome ideas thank you

  • @carloskawasaki656
    @carloskawasaki656 13 дней назад

    Thank you for shaing, i learn a lot 👍👍👍👍

  • @jeffreylocke8808
    @jeffreylocke8808 14 дней назад

    Ingenious adaptation of that brush hog!!!

  • @nathanielpreble5108
    @nathanielpreble5108 15 дней назад

    This is like polishing a turd? “Redneck” garages need to have a curved roof with just enough height to store whatever you’re going to place inside it. Extra headroom and corners are a recipe for failure. Don’t waste your money on this type of temporary shelter. Especially in a snowy climate.

  • @user-tf6zl2ov8l
    @user-tf6zl2ov8l 15 дней назад

    If spinning out kicks up the Geo tech fabric it means it's to too shallow instead of 4 go with 8

  • @jacksplumbingvideos7147
    @jacksplumbingvideos7147 26 дней назад

    I always prefer air filled tires, they are softer and reparible when they get damaged.

  • @Deyth89
    @Deyth89 Месяц назад

    Nice work guys!

  • @DiscountSasquatch
    @DiscountSasquatch Месяц назад

    Just stumbled across your channel, and love the fix! (But, please get a portable vice hah)

  • @RichardFranks-tn2zn
    @RichardFranks-tn2zn Месяц назад

    ❤loved the pond build

  • @RichardFranks-tn2zn
    @RichardFranks-tn2zn Месяц назад

    I am the hundredth subscriber Franks from New Zealand Christchurch ,Sumner

  • @workinghardusa
    @workinghardusa Месяц назад

    Cool video, well done!

  • @ryanbarr4910
    @ryanbarr4910 Месяц назад

    You may also want to ensure you have enough freeboard above the spillway to account for wind & wave action or a heavy rainstorm event. The water color is beautiful.

  • @ryanbarr4910
    @ryanbarr4910 Месяц назад

    I’d take the walnut out, if it was me. I’d also bring that swale farther up hill or make a terrace up hill. Either way I’d make it much larger, I’d put it on contour, and give it a large, level spillway away from the dam. If your spring seepage is slow, a contour swale up hill would charge the ground water flow. I’d make the emergency spillway substantial in size just in case. Did the primary spillway have an anti seep collars around it?

  • @imagineengine
    @imagineengine 2 месяца назад

    I'm afraid your building method of raising the walls off the ground may not be the best idea. That looks like it is going to cause problems when you get high winds because when they can get underneath the walls that could cause a severe amount of lifting which could prove disastrous to your canopy. Sorry to say this but it just looks like a bad idea. You want to block out the wind especially under the walls.

    • @NeudorferFarm
      @NeudorferFarm 2 месяца назад

      Thanks for the advice and it makes sense

  • @kimgardner4464
    @kimgardner4464 2 месяца назад

    I had one of those tents and, guess what, had the exact same problem. Mine ended up going through three major repairs until the last storm just blew the heck out of it. They are great - if you consider them a temporary structure.

  • @kimgardner4464
    @kimgardner4464 2 месяца назад

    Glad to see you kept someone's hard work from 1983 still on the road in 2024! Good production and music in your video.

  • @OoavastoO
    @OoavastoO 2 месяца назад

    Good and simple reinforcement job. That will definitely beef stability up. If you don’t mind, I have 1 idea/suggestion: If you’re looking for a little added insurance of the wood not wearing through the tarp fabric over time, I’d put either glue-on or peel-and-stick foam sill gasket on the tarp side of the wood. (I think it’s usually pink and about 3 1/2 “ in width) It’s dirt cheap, comes in good sized rolls, it’s thin (3/16”) so no added bulk and easy to work with (cut to size, shape). It also has the bonus of being waterproof and can protect the wood from condensation where the wood contacts the tarp fabric. Just an idea.

    • @NeudorferFarm
      @NeudorferFarm 2 месяца назад

      Thats a good idea, thank you for the advice!

  • @barney1941
    @barney1941 2 месяца назад

    they make a UM series that is much thicker and not much more $ the UM72 was $2500 they make a UH which has 1/2'' end plates

  • @daicatvlog
    @daicatvlog 2 месяца назад

    Thank you for sharing the great clip. Hope the channel grows more and more

  • @piushorning4869
    @piushorning4869 3 месяца назад

    why do you have a child on the tractor, not very safe practice

  • @countryboy3218
    @countryboy3218 3 месяца назад

    I have a 1973 International Cub Cadet 149 with a tiller on it and I love it, the seed bed is perfectly tilled and flat when tilled with it, it tills 5 inch deep too.

  • @dillpickle7633
    @dillpickle7633 3 месяца назад

    You're a great dad! I wish you and your kids great health :)

  • @user-xt5oe2gm5v
    @user-xt5oe2gm5v 3 месяца назад

    FBI. Holland. Ronald. Restoration as a magic spell.

  • @caseyellis4480
    @caseyellis4480 3 месяца назад

    Great Dad! Awesome!

  • @IOSALive
    @IOSALive 3 месяца назад

    Neudorfer Farm, I can't get enough of your content, so I subscribed!

  • @CHEAPROLLIN
    @CHEAPROLLIN 4 месяца назад

    Nice I have an advance 12x20

  • @frankwrogg2515
    @frankwrogg2515 4 месяца назад

    If you get winds like i do 50+ mph you will be surprised that they survive it.

    • @NeudorferFarm
      @NeudorferFarm 4 месяца назад

      I hope we don't get 50mph haha. Good to know that they can withstand it, thank you

  • @zackn7067
    @zackn7067 4 месяца назад

    "That ain't goin nowhere"

  • @nongdantexas4478
    @nongdantexas4478 4 месяца назад

    I flew to PA last week seeing couple customers. Looking down from the airplane, PA was so beautiful with so many farm houses up and down hills surrounded by trees. You did really well with the tractor, I love doing tractor works. I wish you and family the best.!

  • @aaronburford5701
    @aaronburford5701 4 месяца назад

    Viewed, Liked, Subscribed! Love the tilling work! Great content!

  • @emileyneu
    @emileyneu 4 месяца назад

    Thanks for fixing our saw - love you ❤