devicessetup
devicessetup
  • Видео 238
  • Просмотров 1 214 721

Видео

How to reconnect Blink Mini Camera to new WiFi Router | Replaced/Changed old WiFi Router |
Просмотров 242 часа назад
If you recently changed your router then you will have to reconnect your blink mini camera again to the new router's ssid. For that open the blink app and go to more options on your blink camera and then go to device settings. Next go to general settings then go to change wifi. After this you will need to reset your blink camera using a paper clip. Next tap on discover device option and join th...
AOSU Doorbell Camera Firmware Update Guide Via Aosu App | Devicessetup
Просмотров 334 часа назад
Learn how to update Aosu video doorbell camera firmware update in just 1 minute. To start with first make sure your Aosu doorbell is all setup and wprking. Next open the Aosu app and go to the three dots and then scroll down to firmware option. Itbis recommended to keep your aosu doorbell firmware up to date. As this will ensure your devicevhave latest security features and is loaded with lates...
How to connect Netgear WiFi Extender to new router | Video guide works for all Netgear models |
Просмотров 4157 часов назад
If you recently changed your router and now your netgear extender shows offline and says no internet then first you will need to reset the netgear wifi extender and then set it up again. To reset the extender put a paper clip inside the reset hole of the extender for around 10 seconds while it is plugged in to the wall. After 10 secs release the pin and let the extender reboot. Then try the set...
How to reconnect YI Security Camera to New WiFi Router | Devicessetup
Просмотров 177 часов назад
If you recently changed your router and your YI security camera shows offline then you will need to reconnect it back again to new wifi ssid. So first simply reset the camera and then add the camera back again using its app to the new wifi network. Lights status on YI security camera :- ruclips.net/video/W8ifz8Tj1sU/видео.htmlsi=rg_MH2k-wjNKXGVW #yicam #newrouter #wifi
A flashing yellow light and flashing blue light on YI Pro 2k Security Camera? What does it means?
Просмотров 2712 часов назад
If you see a flashing yellow/blue light on your YI pro 2k camera then it means that your yi pro 2k security camera is searching for a wifi network and trying to connect to your wifi network respectively. A slow fkashing yellow light means that the firmware update process is taking place. Topic covered in the video:- flashing yellow light meaning on yi pro security camera. flashing blue light on...
192.168.0.254 Router Login Step By Step Tutorial | Can't Access 192.168.0.254 Router Login Page |
Просмотров 10014 часов назад
To login into your router using 192.168.0.254 ip address first make sure your router is connected with ethernet cable to the modem. Then connect your phone or computer with routers network and then on the same device open a browser and into the url or address bar type 192.168.0.254 to access your routers login page. How to find routers IP Address :- ruclips.net/video/gBXtRtP4Mi4/видео.htmlsi=mK...
Orbi Router Admin/Login Password Reset Guide | Recover Netgear Orbi Mesh WiFi System Admin Password
Просмотров 4616 часов назад
If you want to reset or recover the netgear orbi router admin or login password then as per your mesh system age you will have to follow the recovery steps. For example if you have old orbi system then you can simply click on cancel button once you are on orbilogin.com page. Whereas if you have new orbi mesh system then try three or more wrong combinations of usernames and password on orbilogin...
How to Extract Zip Files on Computer (Windows/Mac) | Unzip Files on Pc |
Просмотров 1619 часов назад
To extract files on mac system just double click on the zipped file and to extract files on windows computer right click on the zipped file and then tap on extract all option to unzip your files. How to update apps on ios:- ruclips.net/video/-THdQXq9g28/видео.html How to update apps on android:- ruclips.net/video/SJzcEGI6FT0/видео.html How to update amazon alexa:- ruclips.net/video/uue5geKWAc8/...
How to Setup Ethernet Backhaul on any Orbi Mesh WiFi System | Works For All Netgear Orbi Models |
Просмотров 37021 час назад
If you want better speeds from your orbi mesh wifi system then setup ut in ethernet backhaul format. This will improve your internet speed much better than what you were getting in wireless backhaul. You can also add ethernet switch in this setup in case you want more devices to get connected to the orbi system So, this video guide works for all netgear orbi mesh wifi systems. How to connect et...
How to connect Ethernet Switch to Netgear Orbi Mesh System | Video Works for all Orbi Mesh Systems |
Просмотров 56День назад
To connect ethernet switch to netgear orbi mesh wifi system first setup your orbi router unit. Also make sure you connect your orbi router unit wtih ethernet cable to the modem. Then plug one end of the ethernet cable into the lan port of the oebi router unit and the other end into any of the port on the ethernet switch. How to remove old orbi satellite unit from network:- ruclips.net/video/i-e...
How to Remove Old Orbi Satellite unit from network | Removing inactive Orbi System via browser |
Просмотров 209День назад
If you would like to remove netgear orbi wifi mesh satellite from network map then first you will need to login into your orbi web management page and then go to attached devices. There you will see all the satellites units so tap the one that you want to remove. Also make sure to keep the unit that you want to remove unplugged from power while you are trying to remove it. Also this video guide...
LED Light Status And Their Meaning on Orbi WiFi 7 Mesh 970 Series System
Просмотров 23День назад
Learn what pulsing white light, magenta light, and no light on orbi wifi 7 mesh system means. There are two lights on this orbi unit first is on the front and second on the back. In this video we will learn what different lights on it means. How to setup Orbi WiFi 7 Mesh system :- ruclips.net/video/8i4TuKy3qzk/видео.htmlsi=BwuIMjf7e0p-Hd8H How to reset orbi wifi 7 mesh system :- ruclips.net/vid...
Setup Orbi 970 Series Quad-Band WiFi 7 Mesh System Using Orbi App |
Просмотров 3114 дней назад
To setup orbi wifi 7 mesh 970 series system first download the orbi app on your android or ios. Next follow the on screen instructions to complete the setup. Download orbi app for android:- play.google.com/store/apps/details?id=com.dragonflow.android.orbi Download orbi app for iOS:- apps.apple.com/us/app/netgear-orbi-wifi-system-app/id1182184397 How to reset orbi wifi 7 mesh system:- ruclips.ne...
How to Reset Orbi 970 Series WiFi 7 Mesh System to factory default settings | Soft/Hard Reset Guide
Просмотров 9614 дней назад
Press the reset hole on Orbi 970 series wifi 7 mesh system for around 10 seconds to reset it to factory default settings. If you would like to reset or just restart it, like just do a soft reset then press the reset button for only 3 seconds. After this you can start it's setup again. How to reset rbi RBE970 :- ruclips.net/video/8aO8FQ25jQc/видео.htmlsi=sXT0OqhRnd9Pe8zV Light status on orbi wif...
How to Fix Verizon Router Red Globe light Issue | No Internet on Verizon Router |
Просмотров 9014 дней назад
How to Fix Verizon Router Red Globe light Issue | No Internet on Verizon Router |
How to remove charging cap or USB port cover on Insta360 X3 Camera? Take Off Insta360 USB Cap |
Просмотров 5814 дней назад
How to remove charging cap or USB port cover on Insta360 X3 Camera? Take Off Insta360 USB Cap |
Wyze Cam Pan V3 Calibration Failure | How do you Calibrate Wyze Cam Pan V3 |
Просмотров 7314 дней назад
Wyze Cam Pan V3 Calibration Failure | How do you Calibrate Wyze Cam Pan V3 |
Can't Connect Insta360 X3 to Android or iPhone | Insta360 X3 Troubleshooting Guide |
Просмотров 25614 дней назад
Can't Connect Insta360 X3 to Android or iPhone | Insta360 X3 Troubleshooting Guide |
Wyze Cam Pan V3 Motion Tracking Not Working, FIXED ✅️ | Wyze Camera Troubleshooting |
Просмотров 19021 день назад
Wyze Cam Pan V3 Motion Tracking Not Working, FIXED ✅️ | Wyze Camera Troubleshooting |
Setup Amazon Eero with Existing Router | Use your Current router with Eero Mesh WiFi System |
Просмотров 63821 день назад
Setup Amazon Eero with Existing Router | Use your Current router with Eero Mesh WiFi System |
Different USB Mode and their Functions on INSTA 360 X3 Explained | U Disk Mode, Webcam, Quick Reader
Просмотров 3721 день назад
Different USB Mode and their Functions on INSTA 360 X3 Explained | U Disk Mode, Webcam, Quick Reader
Setup Wyze Cam Pan V3 Security Camera Using WYZE APP | Wyze Cam Pan v3 Setup Guide |
Просмотров 4521 день назад
Setup Wyze Cam Pan V3 Security Camera Using WYZE APP | Wyze Cam Pan v3 Setup Guide |
Red & Blue Light Status On Wyze Cam Pan V3 Security Camera | Light Status Guide |
Просмотров 7721 день назад
Red & Blue Light Status On Wyze Cam Pan V3 Security Camera | Light Status Guide |
Reset Network Settings Using Appstore on iPhone | For All iPhone Models |
Просмотров 2321 день назад
Reset Network Settings Using Appstore on iPhone | For All iPhone Models |
How To Update All Apps On IPhone Using Appstore In Single Click | Update App on iOS |
Просмотров 6721 день назад
How To Update All Apps On IPhone Using Appstore In Single Click | Update App on iOS |
How to Connect Wyze Cam Pan V3 to Alexa | How to Add Wyze Security Camera to Amazon Alexa |
Просмотров 14728 дней назад
How to Connect Wyze Cam Pan V3 to Alexa | How to Add Wyze Security Camera to Amazon Alexa |
Request Time Out, Retrieving IP Time Out Error On Security Camera? How to solve?
Просмотров 5528 дней назад
Request Time Out, Retrieving IP Time Out Error On Security Camera? How to solve?
Reset Wyze Cam Pan V3 To Factory Default Settings | Devicessetup
Просмотров 593Месяц назад
Reset Wyze Cam Pan V3 To Factory Default Settings | Devicessetup
How to Update Firmware On Wyze Security Camera? Guide Works For All Wyze Camera Models |
Просмотров 68Месяц назад
How to Update Firmware On Wyze Security Camera? Guide Works For All Wyze Camera Models |

Комментарии

  • @Nobunagawa
    @Nobunagawa День назад

    Thank you! I can't believe that they don't even show you in the manual where the hidden button is...

  • @mohammadimami4507
    @mohammadimami4507 День назад

    Thanks

  • @deborahlewis967
    @deborahlewis967 3 дня назад

    Thank You !!

  • @Mazza666
    @Mazza666 3 дня назад

    Use the nighthawk app to pair extender if you're unsuccessfully using manual/wps method

  • @Mazza666
    @Mazza666 3 дня назад

    Use the nighthawk app to pair extender if you're unsuccessfully using manual/wps method. I was unsuccessful with both these methods

  • @Mystic.Legend.
    @Mystic.Legend. 4 дня назад

    Great explanation! 🙌 if I do the double combo router/modem I have with a 3 pack Eero mesh, is it essential requirement to put my existing combo router into bridge mode? If so does that mean the security settings on that existing combo router carries over to the eero’s or what would happen with my existing security settings in my existing combo router? I heard that the eero’s security settings are behind a paywall and not sure what sort of security is even on the eero’s. Hope you can advise, thank you.

    • @devicessetup
      @devicessetup 3 дня назад

      @@Mystic.Legend. •Yes, it is typically essential to put your existing combo router/modem into bridge mode when using an Eero mesh system to avoid network conflicts. Security settings from your combo router/modem do not directly carry over to Eero once it is in bridge mode; Eero manages its own security settings. Eero provides basic security features for free, with more advanced features available through their Eero Secure subscription. Before setting up your Eero system, it's a good idea to review the specific security features included and decide if you want to opt for additional features through the subscription service based on your security needs and preferences. Hope it helps!

    • @Mystic.Legend.
      @Mystic.Legend. 3 дня назад

      @@devicessetup thanks for the information. But I assume I could just plug the Eero directly into my existing combo modem/router and just set it up without having to either do bridge mode or double natting right? It would just route wifi traffic from the existing router?

  • @EvokedRose
    @EvokedRose 5 дней назад

    The only option that worked for me was the browser on my phone. Thank you 🙏

  • @isaiasmtmjr
    @isaiasmtmjr 5 дней назад

    Loved the video and various ways to connect. Very user friendly process as described by you. A+++++

    • @devicessetup
      @devicessetup 3 дня назад

      @@isaiasmtmjr Happy to help, do kindly like and subscribe to support my efforts 🙏

  • @CherylBepis
    @CherylBepis 5 дней назад

    You helped me when I thought I was losing my mind - thank you and God bless you

    • @devicessetup
      @devicessetup 3 дня назад

      @@CherylBepis Thank you so much for your kind words, just a small request plz do like and subscribe as it will help in my small channel growth 🙏

  • @Efreezy29
    @Efreezy29 7 дней назад

    Does the router and modem need to be connected with an ethernet cable?

  • @sunshinehwy
    @sunshinehwy 7 дней назад

    I want to wirelessly connect to existing Router then hardwire Ethernet devices to the Night hawk, should that work?

  • @mik1998
    @mik1998 8 дней назад

    Is RE215 can be extended using lan cable?

  • @hotrod3061
    @hotrod3061 8 дней назад

    signology...we shoulda never gave you people internet

  • @jeffcarlson9384
    @jeffcarlson9384 9 дней назад

    How do I turn off the white LED light ? thanks

  • @76TomD
    @76TomD 12 дней назад

    it will tell you it is up to date even when it is not. I have two identical units. Both were on an old version and only yet only one said it needed to be updated. The 2nd unit responds 'this unit is up to date'.

  • @jijoofanchal
    @jijoofanchal 12 дней назад

    Hi

  • @cyrixthedoll
    @cyrixthedoll 13 дней назад

    Thank you!

  • @TerryB751
    @TerryB751 13 дней назад

    I wish the camera would allow battery recharging while the camera is still online. The app never seems to show an increase in the battery level while it is online and plugged in to charge. I always have to turn the camera completely off and then charge the battery. Then go through the whole sequence of bringing the camera online again.

  • @rogojangigel3294
    @rogojangigel3294 15 дней назад

    Hello,..I have a question, when I turn it on, the green light from "POE CONVERTER" blinks and does not work......Thank you

  • @niteshk3209
    @niteshk3209 16 дней назад

    Simple and to the point , thanks

  • @batmane730
    @batmane730 17 дней назад

    I did the nighthawk app method but it didn’t seem to improve and or extend my wifi at all

    • @devicessetup
      @devicessetup 3 дня назад

      @@batmane730 maybe try changing the channels on the router or try upgrading ur wifi plan

  • @arunjain265
    @arunjain265 18 дней назад

    Site not open

  • @jsanchezparra85
    @jsanchezparra85 19 дней назад

    Hello there, thanks for the video. One question: how can i choose just to vacuum or just to mop

  • @AdityaBhosale-n7q
    @AdityaBhosale-n7q 19 дней назад

    tell me microscan username and password

  • @joergenandersson3922
    @joergenandersson3922 19 дней назад

    very very bad extender and setup. if you use a phone on the wifi it will NOT automatic change to the stronger extender if it still have just a little signal from the first extender... my advise is, delete this video, this is so so wrong

  • @pissedoffpuppy
    @pissedoffpuppy 20 дней назад

    Are you able to keep the starlink wifi active and add the home router hardwired to the GEN 3 unit and then add a separate home wifi to the home router?

  • @rain7096
    @rain7096 22 дня назад

    👍

  • @VishalYadav-wn8gc
    @VishalYadav-wn8gc 22 дня назад

    Hello sir after linking my Tapo to alexa it says Sorry it is not supported what should i do?

  • @FRw1K92
    @FRw1K92 23 дня назад

    Are the antennas removable?

  • @thinkbhavana
    @thinkbhavana 23 дня назад

    Thank you for your video. Can you disable the camera from the app. In other words, if I do not wish the camera to record for a period of time, can I disable it remotely without having to climb up and disable it manually? Thank you for your time.

  • @PNWDADDY
    @PNWDADDY 29 дней назад

    Great video !!🎉

  • @PNWDADDY
    @PNWDADDY 29 дней назад

    Help with the battery pro 2k iv Tried all the steps but the disconnect in the modem and router would that really work and what does that do should I try it

  • @oddexplorer7976
    @oddexplorer7976 29 дней назад

    But my wifi router doesn't have internet yet so how can i do configuration?

    • @devicessetup
      @devicessetup 29 дней назад

      Connect ethernet cable from modem to the router's wan port if u have modem. In case you have internet cable directly coming from ISP then plug it directly into the routers wan port. Next connect another ethernet cable from routers lan port to your computer then access this ip address on ur computer to start ur router setup.

  • @dustinwhite6885
    @dustinwhite6885 Месяц назад

    Thank you.

  • @themightythor1974
    @themightythor1974 Месяц назад

    The only that worked was the ip address, thank you for the great tutorial. It was extremely helpful.

  • @davidbrisbane7206
    @davidbrisbane7206 Месяц назад

    Thanks. This advice worked for me and yes, I came across the scammers and avoided them!

    • @devicessetup
      @devicessetup Месяц назад

      Happy to help, do kindly support my efforts my like and subscribe

    • @davidbrisbane7206
      @davidbrisbane7206 Месяц назад

      ​@@devicessetup Done!

  • @EthanConner-jj6mg
    @EthanConner-jj6mg Месяц назад

    Thank you so much this huid was way bette Ethan the original one

    • @devicessetup
      @devicessetup Месяц назад

      Really happy to help, do support my small channel my like and subscribe

  • @christiancordy639
    @christiancordy639 Месяц назад

    Do you know how to change it to a different WiFi after you've already set it up to a different one?

    • @devicessetup
      @devicessetup Месяц назад

      Simply reset the extender, by pressing the reset button on it using a pin or paper clip for around 10 seconds while the ext is plugged in to a power source, and after 10 secs let the ext reboot. AND THEN set it up again.

  • @icrooCZ
    @icrooCZ Месяц назад

    I tried but it said site not reached

    • @devicessetup
      @devicessetup Месяц назад

      Make sure your laptop is connected to your routers ssid or is connected via ethernet cable to your router while u try to login into it.

  • @Frrostbitt
    @Frrostbitt Месяц назад

    Please help, whenever i manually enter the website it says it could not be reached or it didnt connect. And the other websites did not work

    • @devicessetup
      @devicessetup Месяц назад

      By website do you mean "mywifiext.net" or any random website or url?

  • @High_Pristess1111
    @High_Pristess1111 Месяц назад

    Thank you...

  • @Rambhakta123-i7h
    @Rambhakta123-i7h Месяц назад

    Thank you

  • @tonytran8777
    @tonytran8777 Месяц назад

    W video the others don’t work for me this dude goes in detail and provides other ways for it to work if we run into a problem.

  • @tonytran8777
    @tonytran8777 Месяц назад

    W VIDEO FUCK THE OTHERS ONES

  • @hazystudios
    @hazystudios Месяц назад

    Thank you! This helped immensely... I did get sucked into one of those scam sites wanting my personal info because another video wasn't clear on this, fortunately I had the sense to leave it. Thank you again!

  • @oldgamer1330
    @oldgamer1330 Месяц назад

    Hi, my router has different WPS modes, PCB, Pin, AP-Pin do you know what it should be on. Thanks.

  • @kenshinesca
    @kenshinesca Месяц назад

    Will web browser method work if I used the wps method to setup the extender?

    • @devicessetup
      @devicessetup Месяц назад

      If The extender is already setup, then the router will assign new ip to your extender. SO U WILL be able to login into the ext using that ip address. Or else connect to extenders ssid and type tplinkrepeater.net into the address bar. If that works great, If not then find the new ip and login via it. YOU can watch thr video here on how to do it.ruclips.net/video/Iszz2Oyna4E/видео.htmlsi=1YXt58GZEchs5uyS

  • @phoenixsage29
    @phoenixsage29 Месяц назад

    I'm lost at repeater mode

    • @devicessetup
      @devicessetup Месяц назад

      You can reset the extender by pressing the reset hole for around 10 secs while it is plugged in to a power source and then try the setup again..

    • @nadinquintero6345
      @nadinquintero6345 Месяц назад

      Hi where is the reset button?. Thanks

    • @devicessetup
      @devicessetup Месяц назад

      @@nadinquintero6345 In case your unit does not have a reset hole then press the wps button for around 15 seconds. After 15 seconds release the button and let the extender reboot.

    • @nadinquintero6345
      @nadinquintero6345 Месяц назад

      Thanks so much for your answer 😉

  • @nanz8722
    @nanz8722 Месяц назад

    What to do please help!!!!

  • @nanz8722
    @nanz8722 Месяц назад

    I cannot connect to my internet because i accidentally erased my SSID please help!!