Видео

I wonder if they follow you cause you "play cat and mouse games" instead of just shopping then leaving. It's not that serious. Asset protection isn't there to give the benefit of the doubt. Old ladies steal. Theft isn't limited to how you look.

No ground on the old cord.

For $14 I’ll throw it away every day and never buy harbor freight junk again

Walmart treats everyone the same like 💩

Awesome video. How do you decide which grinding wheels to use? I picked one of these 1055’s up second hand and it came with a whole box of different grinding wheels.

I’m sorry. I’ve really really really tried to be positive but you make me cringe. Not sure if I’m seeing an idiot master class or an ignorant person. Honestly I think you should just stop and go watch an actual professional video

I have a Hondo The Sting Bass. The sting and ufo were made at the same time. The bottom edge of the ufo sits perfectly against the top edge of the sting.they made the sting in a six string model and a bass model. To the best of my knowledge they only made 500 of them in bass. The ufo is an extremely rare guitar. They made a lot of the ufo model but most of them were lost in time. Awesome find. Ive been looking for one of the ufo models for years now. Im always to late just sold kind of things. Nice find man.if you look at the add with wonder woman the other guitar is the sting. And yes it is a headless instrument.

So confused here bro You worked as lp and you felt harassed at different t store ???

does anyone know a good source for accesories for this saw

I have one too. I was doing some work at a thrift store back in 06 and someone dropped one off. Well one of the workers knew I played guitar and decided to just give it to me. I've had it ever since. 😊

Did you ever do anything after the furnace? I am going to use Gingery's ideas and build a vertical milling machine. I am going to scale any measurements up and see what I can do. I am starting a YT channel as soon as it gets warmer and I recover more from a motorcycle accident. I was riding to work on my Hand restored 1957 Harley Panhead and I was clipped and flipped up and around a telephone pole with my bike and my right leg taking the worst of the crush. I am out of danger for losing my leg but I am dealing with the aftermath. I want to be able to make any parts for my 928 Morgan Aero Brooklands MG Special. I will be building a Pembleton style Hillclimb racer that has a BMW engine and a 4speed transmission and a narrowed 12 bolt rear. I like your furnace build. Thanks for sharing.....

I came across your video while trying to find our what happened to a pastor that was there before Steve Poe and haven't had any success. Although I never attended that church I had friends who did. Unfortunately the Pastor before Steve Poe was involved in a scandal which began the splitting up of the congregation. There were three big churches in St Joseph at the time, Word of Life where I attended for a number of years, Grace Evangical, and Caring First and it seemed like people would migrate around those congregations when they got disgruntled where they were going so a good number of Caring First members left and went to the other two congregations after the scandal and so I think because of the loss of substantial financial support of the wealthy members the church got on a downhill slide till they gradually started selling off property until they were down to a skeleton of the church they once were and had to put the building up for sale and the Baptist Church bought it. Very sad story

Normal shopper never notice a loss prevention you know why bcuz there not gonna do anything wrong

What are the measurements of the planer tool holder that you made

What are the measurements of the knife holder tool that you made

Is there enough space under the bridge plate for a humbucker without routing? I have a sting and have been looking for a UFO for years

Jason, Any chance I can get you to do a video on the chainsaw attachment?

I'm going to try this tomorrow! Thank you bud! I seriously was about to purchase a new one until I figured it out

I just got one of these and it looks as though it was never used. I appreciate now knowing what it was meant to do. Thank you. Don’t need it ,so if you or someone is interested let me know as I will sell inexpensively to someone local to central Calif. Ray

i get mixed results on bits with mine (like yours) . newer versions have a redesigned drill module that looks like it works better than this style .

Hey Jason I got that same grinder I bought last year, I bought three grinders actually I got the acme post grinder and foley model 310-16 and the foley 1055 sharp all, I haven’t really even touched the 1055 but it’s in very good condition is missing a couple of peices but have got the drill attachment I just got, you have a email couod maybe chat back and forth 😁

Lost Prevention lady fake like she was into me following me every time I was at Walmart, but I knew deep down she was fake then after rejecting her her boss came out of the prevention room mean mugging me down lol.

The biggest form of theft is wage theft yet they are so concerned about consumer theft. These companies have insurance to cover theft, what do these employees have to increase their wages? Nothing. I cannot stand 99% of retail workers. Like someone said below they cannot spot actual thieves to save their lives. They simply stereotype and use that as their guide. They follow the white guy like yourself who looks tough, those with tattoos, they follow those of us who are black whether we dress nice or not. All I do is either confront them politely that way when people overhear what they are doing THEY look like the bad guy. People never side with the person yelling. If the worker yells everyone will blame them as they should. I also will follow them back and watch them instead. Because you’re a guy it would be better to do that than confront them as that can turn hostile.

*PromoSM* 🤭

Thank you very much for this video and yes it would be helpful if the camera was on a tripod. Just a little bit wider shot with less movement Great explanation

I said input jack in the video but I meant volume control. I was working on another project and I had input jack on the brain.

Very cool, never seen one of those! Funny to see a single coil on that, I would expect a humbucker. I have a set neck LP style with Dirty fingers in it, great player and not so heavy.

Wow, never seen one of those, very cool.

I knew I should have bought it

I’ve never seen one of these. I do own a Death Dagger which is quite different. The headstock is exactly the same. But the body is quite a bit bigger. Thanks for sharing!

Ah...Hondo 🙂🙂🙂 Thankfully I still own the ones I bought back then... Especially the Death Dagger which is my favorite... Sadly I never got Wonder Woman with any Hondo I bought... Great video 🙂 I'd love to add this one to my collection...

weren't these made from the off cuts of a Sting...so to use up the extra wood, they just made the UFO?

It's bizarre that they went with 23 frets. There were a few Peaveys and Kubickis that did that as well, and I always found it strange. If you're gonna' have more frets than the 21 or 22 on most Fenders and Gibsons, why not just add one more to provide a full two octave range on each string, with the highest note on the instrument being the same as the lowest note, only four octaves higher? That being said, I also always thought it strange that most Fender, Gibson, and Rickenbacker basses only had 20 frets instead of adding one more for 21, which left the highest note an Eb instead of an E.

My God, 3 minutes in and I'm still waiting for you to make a point.... About anything! Outa here.

Dude, ive bern in LP for 30 years. If you don't start with the premise someone is going to steal, you will never catch anyone. There are good and bad LP but you've picked pit all of the negatives with no positives. Extremely biased and shows the limits of your knowledge of the profession. You're actually the easiest person to cstch because you think you know it all. If i was watching you, you would never know it. Those not being surveilled can obviously identify LP because the behavior is abnormal. However, a equality store detective will never be seen until you hit the door. And by the way, while it's possible for someone to have never stolen, it is extremely rare and i just don't believe you. Nearly every kid steals something. If not from a store, it will be from a party, your parents or siblings, a friend or an office. So get real too. Deep down you know I'm right

Video is hard to watch because sound is so low!

Awesome video. I was able to get mine fixed!

Thanks. I just brought 2 back.

Though it's true these are a very basic construction and rebuildible, but.....if the seals inside are defective, you can't buy them. Orings maybe, but I doubt the diaphragm is shot, good luck finding another one. Also I hear it's got a leak. Was that where you didn't put any thread tape? It is weird it wouldn't spin, unless it was frozen due to lack of grease. It is a shame u can't just buy kits to rebuild them. They are made really well and ashame that throwing them away is an answer at all. But for 15 bucks, most people feel like, why go to the trouble. As long as you oil and grease them, there's no reason to trash them. I just gave 80 bucks for an Ingersoll Rand 2 inch. And I'd be damned if I'd throw it away due to some seal failure. They better have a reasonably priced kit to repair it. Thanks 👍

Great help and good commentary.

I have a Mac one I bought for 20$ from someone and I feel air coming out of top of the head, any ideas? its the AG14AH Angle head die grinder

I dont have much need for a die grinder but I've run into the occasional situation where I sure wish I had one. I don't want to spend a lot of money but I definitely think I can justify buying one of these now that I see how it's built. Seems like harbor freight has a consistent problem with not lubricating moving parts.

did u just say that bs. the most important information... shame on you. lol while we waited to do our taijiquan workshop at leisure world. we attended the works shop of GM JIN PAL KIM, a real martial artist. i do agree and told my students you learn more by making mistakes. can't watch anymore of ur old stuff though cause you suck. ijs

tf u think u teachiung and showing folks. totally bs in expression. there is no leaning back the way you did. you ever heard of a C back speaking on the curvature of the torso ? obviously not. i sure hope by now you have learned legit hsing i from a teacher who teaches you properly.

This guy, I've always been honest 😉

You can also buy carbide tips in bulk and when you knock a tip off you just weld a new tip onto that tooth of the blade. There isn't any need to throw the blade away just because you are missing a few teeth. You can remove all the carbide tips when they are all very worn, weld on all new tips & sharpen them and you have a blade that is like a high end blade for a fraction of the cost.

I wore well fitted jeans that would stretch, tank top, cotton soles Chinese hand made shoes. This way teacher can easily see my skeleton in the form to make corrections. It wasn’t for him, but for me.

Quisiera saber dónde puedo adquirir el producto

Used that Belsaw saw sharpener with my dad in my teens in our saw sharpening shop many years ago . Glad to see one still being used

I had a employee taker her time moving so I could get milk so I said a few things as I walked away " move outta the way for customer to get there product" so I walked back around as she pulled out her phone started recording me taking pics. I walked towards the front if store and told a manager and also called corporate as I was soon notified they are not to be doing that and she was delt with accordingly. I seen her a week later so she wasn't fired unfortunately.