Видео

hi how are you how can i help you.

After filler you sand it again then you apply sealer .

@@Ermes12FloorSander what sand pads should i use for the first sanding and what pads should i use for the sanding before sealer? Im thinking a heavier sand pad before and after really light one before sealer? Would this be correct the way? Cheers

so I use these crazy ones for the first procedure I use belt 36 for the first. second I use belt 50. and for the final process I use belt 100. also for the edges I use first process with disc 36. for the second disc 50. and for the last hand I use disc 80 for the edges.

you do the filler after you do the first procedure. for example you start to woo the floor with belt 36. also the edges with edger disc 36 when you do this. after you apply the filler. and then you wait 30 minutes or more for the filler to dry. and proceed with belt 50. then belt 100 final. done this. after you do the edges with edger disc 50 and to finish the edges do Festool disc 80

Thank you for your compliment 👷‍♂️👍

it's called bona varnish matt

thanks for your opinion 👷‍♂️✌️

Jenkins joint filler but any ressin will do and if you use the saw dust from the acctual floor will be the closest match as it is dust from the same wood .

​@@Ermes12FloorSander Do you sand the floor again after applying filler? What's the final stain/topcoat used? Does the filler take stain?

@jakeb1778 then the filler is used before the final sanding with belt 100. I use the filler. and after that I leave it for an hour for the filler to harden. then I use the last procedure to sand the floor with belt 100. and for the edges I use the last coat disc number 80. then after doing this. apply the stain on old wood floors. the name of the stain is morrells light teak stain. for the color. after this you let the stain dry. I put 3 coats of matt varnish.

I understand tell me how I can help you.👷‍♂️

You're right, I'll try to make the next videos better, thanks for your opinion

The filler is done by mixing the dust from the floor that you sand with resin so it varies fron floor to floor depending on the colour of the wood ,but is the closest match to the color of the wood as it is the actual dust from it .

The name of the product is morrells black varnish .

@@Ermes12FloorSander thank you!

We use 150 grid .

It is oil based

It was a Bonna satin varnish .

Light oak mylands stain , then Bona varnish on top 3 coats of it .

You can do the same thing for decking go through the same proces bit no need for filler and you use decking oil as a finish .

After the first filler use grit 60 then refill and final snd with 100 grit.

🫡✌️🤜

Yes when doing soft wood it will fall and come out eventually while hard woods last longer.

I agree aith you but thats what the costumer recommended to us to use .

what do yiu recomend i do instead

H .you filling it twice .once after the first sand and the second one after 50 .

You can email me on ermezit@gmail.com

@@Ermes12FloorSander Thank you.

Hi ,its dust from the floor that you sanding for a closer colour .

45 if its a 90 degree corner ifthe corner varies you ajust it acoringly.

👍

the name of the color is called jacobean dark oak stain

But it must be mixed with white spirit. for example a glass of akua filled with jacobean dark oak stain and two glasses of water filled exactly as done with white spirit stain. and you will have that color. 👍👷‍♂️

Thank you

@@Ermes12FloorSander does the white spirit cause the color to be a little later than jacobean oak brown alone

What is white spirit and akua are these paint thinner ?