Видео

Having problems with power button. Any fix?

Thank you!! I have the newer model of this, and I've been trying to figure out the issue all day! I hope both sides of your pillow are always cool and your cell phone always has battery.

i have the trio I was useing the pod part and it flashed overload would not make coffee

You are a life saver,I followed your instructions and the machine works great now,I owe you a cup of ☕️ Thanks from Canada, God bless you.

Thank you for saving the day!

any idea how I can repair the red bulb? it seems sealed?

Oh thank you! My roommate and I thank you for this video. Issue resolved

So my train clicks off as it’s going around the track.all lights and cars get power. Sometimes it goes around, sometimes not. The 4 piece

Would this be the case even if I literally just got it? I’ve used it twice and now it doesn’t work…. I’ll try this- once I find a paper clip! Ha

Help! I can’t get my train to power on at all. I have made the track smaller and still nothing. I have one very disappointed 7 year old :( Train has worked in the past. Cleaned track already. Should the on off switch come on with no cars on the track? I’ve always had the cars on too ignite the controller I think? I can’t quite remember.

Thank you! I drink coffee all day. Since yesterday I've been ready to bounce this machine off the wall. Kept getting an error message "overload". I tried emptying the water out of the entire machine and cleaned all visable parts but nothing worked. I pushed a pin into that piece and nothing came out but then I tapped hit firmly on the counter and more and more coffee grinds kept coming out, amazi ng how much considering the size of the piece. Anyway, just sat down to a fresh hot cup thanks to your share! We've gone through about 4 of these flex brews too, never knowing what the simple to fix problem was. It really is a great machine, has Kuerig beat by a mile. Thanks again, this coffee fanatic ain't jonesing anymore. 😋

Hola, tengo el tren holiday express pero dejo de funcionar lonque abastece de corriente a la vía y por consiguiente el control tampoco funciona, donde lo puedo comprar??? Can you help me please!!!!

Thank you so much for this. My machine had only been used a handful of times and I thought to myself “this cannot possibly work how could it be clogged after like 4 uses” turns out it was the problem 😂

Thank you!

After having a single Kcup maker for years we craved a pot being made on the weekends. Researched a bunch of models and choose this one. ruclips.net/user/postUgkxL8yFdHfPF4ObeIwJ5JdM3i_9XLnbjUC2 We love it! We wanted a water reservoir for the single cup so we didn’t have to pour water in every cup but the other models it fed the water to the coffee pot to so by the time we made one pot we’d have no water left. This model has the traditional pour in feature for the pot and the reservoir for the cup which works great for us. Love how there is a bunch of holes pouring the water over the coffee, makes it taste much better. Only drawback I have is the way the lid is angled on the pot section it’s hard to get the last bit of water out of the pot into the machine without it spilling somewhere else.

Found your video when looking for instructors yours so is the only one that looks like mine but how do you use it with a reusable k cup so far I have 3 different brands all set out when we had a community spring clean up so far I've been using the kirag machine it had a glitch that you didn't know the size of cup it was going to do using the large cup setting sometimes I'd get a full cup other times a half and the medium one sometimes a full cup other times a half and other times a large one so I could see why they got rid of it but using the large cup after a while it started working properly we now have a reusable k cup basket and it works great the other machine uses a different pod and we can't

it would be nice if the sound board was integrated into the locomotive it's self.

Fixed! Thanks so much for this video. Appreciate it.

Excellent!! Thank you

Follow the link for our EBay Store www.ebay.com/itm/134378644488?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=et2ngk5oq0u&sssrc=2349624&ssuid=et2ngk5oq0u&var=&widget_ver=artemis&media=COPY.

Is your ebay business still going. Couldnt find you as a seller

I need a new Tree to Tender coal car?

Thanks for the info… so far my coffee maker has only clogged on the carafe side…

Does this train take batteries and my train turns on. But looses power or acts like it needs more power to run

I have this coffeemaker, I have only used the k cup once or twice it pierced fine then but now I tried to use it and it won’t pierce the cups to snap in don’t know what I am doing wrong…I can’t get a reply from Hamilton Beach…I just went back to using grounds but would really like to use K cups…thank you

Do the new ones have the same problem? You shouldn't have to do this on a new coffee maker. Hamilton should address this. Thanks

Thank you so much…I have not been using the cup side for a few months now it works great…

Uhhh ...uhh...uhhh........ Uhhhh

Thank you! I was about to rip apart the entire machine to try and fix this issue. You saved me plenty of time and all sorts of "leftover screws" lol. Thank you sir!

Thanks just saved my coffee pot

Quisiera que lo explicará en español

I had to comment and say THANK YOU!!!

I did that procedure and it did work but the unit never performed as it did when brand new, so I figured there must be more blockages developing somewhere with coffee grinds so I totally dismantled the unit and sure enough there was 2 areas. #1 The holding tank for the 1 cup had grinds in it and the small intake line was almost plugged #2 the line leading to the big pot of coffee was almost plugged, there's a small checkball and line reducing insert within the big clear plastic feed line to reduce flow that was almost plugged, how the grinds get into the system that far I'm not quite sure.The machine must be totally dismantled to get at these areas and there are some 3 point screws that have a special configuration to remove them, I made my own, I guess they don't want a person to get in there to fix the unit to clean the lines and water tank, they want you to buy a new unit I guess. All said and done the unit performs as it did when bought new, you can do it just take your time and take pics as you dismantled the unit. So if the unit is not working right on both sides or only one side after you clean with a wire you have blockages elsewhere within the water lines or there is the possibility the electronic control board is fried but I doubt that would be an issue. Thanks for the wire clearing trick that did work but not in my case for a 100% cure.👍

I have 2 New bright Denver Express locomotives in G scale (C battery powered) Both have a broken gear somewhere inside, I've opened them and found broken gears. Whistles and bells work but not drive wheels. Can these be fixed? Is there anyone who can do this repair?

I have not tried this yet. The pod side quit working yesterday. The water was almost out. Hoping that didn't cause the problem. Thank you, i will try this. Can't stand not having my coffee! Used the caraffe this morning for the first time.

I don’t own this unit, but it was what the B&B provided, and I really wanted some coffee. In my case, I poured a standard 16 oz / 500ml water bottle into the reservoir, and put two scoops of grounds into the basket. Much to my dismay, a couple of seconds after hitting brew, it just beeped and said "ERR". All the videos pretty much offer the paperclip solution, but once I was willing to turn it upside down and pour out 4 oz of the water into the sink, it worked like a champ!

How thick is the white disk around the plunger tube? Ours went missing.

how come on the dancer cars ur elves arent moving up and down?

OMG I was about to take this back and decided to google errors. Mannnnn oh Mannnn this video is awesome. My FlexBrew the plunger comes out and you can rinse the spike out. I was able to get it to work on the k-cup side. Awesome Awesome Awesome. Have a great day and stay safe people!!

I need help!! The hoho, Bell, whistle and all aboard sounds do not work at all when they are pressed there is a slight sound from the train station but thats it and when you press Forward for the train to go there is a long pause before it goes, i’m assuming that it plays the all aboard sound and whistle, please help much is needed!!

OMG !!!! Thank you SO MUCH !!!!! I, too love this coffeemaker and have had it for a long time

We bought our New Bright Holiday Express 386 a few years ago on eBay and have never had a problem with it until the year. After putting it together the train would only go so far then lights and all would stop. We moved train track pieces around and that may or may not help. My husband cleaned the track and the pickups on the timber car. It just seems weird that all of the sudden several pieces of track aren’t making contact anymore. Do you know how to help the pieces of track contact better? Could it just be the contacts on the timber car are going bad? Thanks for any help!

If the locomotive runs smoothly, what would cause it to run slow if all added cars are attached and on the tracks correctly? I just sold this and it was working fine, but buyer is insisting it moves slow. Any ideas?

Mine shuts off without brewing about every other time. Any idea why?

This was so helpful! Thank you very much.

Hello, everything works on my Train set except the engine car....the back wheels will not turn. Any ideas? All lights and music work on the entire set.

thank you ive returned 2 so far what a pain

You are a life saver! Thank you!!

My keurig never had this problem. How have they not solved this problem.

I don't really trust this advice... It's hard to trust someone who can't drink a hot cup of coffee in under a minute flat...