Видео

try putting fuel down carb it might flood it if it gets tight stop and take plug out and turn engine to release excess fuel and it will fire, and neve use wd40 on rc been told by many pros

Never give up brother, and you know it the sound is everything on a nitro

I know this is a older video but for anyone wondering I would 100% suggest 800Kv over a 1100Kv if you have a heavier truck, my X-Maxx with batteries and Brute body is 28.4LBS. I have a Castle sensored combo 800kv I also have HW 1100kv combo. Use the same gearing of both being 25/35 Vitavon gearing. The biggest difference be is the gears this dude is using vs the vitavon, he literally has chunk of heavier LQ metal. His Pinion looks like it weighs about 90lbs by itself. Joke aside get good quality gears even GPM is just 40m vs vitavon 45m look into metallurgy if you wanna know the difference, vitavon also weigh a decent amount of grams less for the same tooths,

Did you not just create a granite with how high that sits?

🆒 video, & ℹ️ have 1️⃣0️⃣ HPI savage 2️⃣5️⃣ 🤑👍🏼🛻🏁

I have a stock Rustler 4x4 that I bought a new Hobby Wint MAX 10 ESC & Motor like you have. I also had the issue of getting the transmitter to run run the motor. What channel did you set it to? I set it to channel 1.

Is better to remove the chassis cover for the heat to escape when gearing high. And i just got my hobbywing brushless combo yesterday for my slash 2wd vxl.

Thanks Bro. Cause I was wondering if i really needed it. Im not a Racer nor a Basher, I don't even know how to flip a vehicle or, i do know how to handle the vehicle though, but im like doi really need the upgraded diff if I'm not Superly bashing? Can't tne original work damn good for few speed runs and yard around the runs?

got to heat it up

Dude I have a vorteks that I ran into a truck tire at like 50 mph and um… Well…. I might have…. Kinda… Snapped the chassis in half and now I have to spend 200 more dollars to buy a roller. 😭

After I bought my first rc, within a year I bought 19 more

Sick cossie 👍 thinking of doing a sierra rs500 myself

❤🎉😮😊. ไฟไฟไฟแอดพ์. แอดพ์.แอดพ์.

I have a original savage 4.1 (.21) and have ran the 4.6 without any issues. Great video.

Max6 차량은 순정모터에 피니언, 스퍼 기어는 몇입니까?

You gave me hope lol my friend gave me a 25 for free it was sitting outside in Florida for awhile pretty ruff its apart on my bench I will conquer this truck 😅😊

i did 100mph on vxl3s . Find me juste on rustler 4x4 that can do that on any hobbywing🤣✌️🤷‍♂️

DONT EVER CLAMP A NITRO ENGINE IN A VISE! especially a very valuable novarossi 528X!! Ughh

you know the blue one a 21 and the other one a 25 and force make the hpi engine the bad engine is a 3''5 and you can get parts for it the 25 /4.1 is no longer

Can't go wrong with a Magners mini-fridge.

not sure if I should get this one or the 4600kv

I just got one of these for my “1:8” (it’s more of a very big 1/16) zd racing pirate, just waiting for my cnhl batteries to show up

Didn't think you could run 4s on this combo

Are you using turbo or do you have it disabled?

That left a mark. I can feel it through the screen😬 also left the InShot mark in the corner😂

Oh man!!! Can’t wait to see the full vid

Savages are great.

How well do they hold up?

God damn clean that truck.

Was the trailer damaged badly?

nice choice of music beat

But would you really want the stock electronics again. If you take those out of the price to $340ish and get better motor and ESC for about $300. Also, would you really want the easily destroyed stick tires? Is the whole diff cheaper than buying just the gears?

I prefer using a roto start for mine because it starts it way faster

This motor will not be able to handle the 4s. Its maximum limit is 3s only

Do you know of a fan and heat sink that would fit this motor?

I wouldn't be surprised if they wouldn't start because they were too rich. Factory settings is not a magic number that will suddenly make the engine run. Tuning will make it run, so if it's rich then lean it out. The problems you're having in getting it started I see a lot, lean them out a bit. The black top engine, crack the glow plug loose when you're cranking the engine then nip it back up once the engine fires up. If you're using 16% nitro then that won't be helping. Big block engines are shimmed for high nitro content, 20 to 40% generally. Put some 25% or 30% in them and they'll go

This axial roto start also works. The Axial AX0507 roto start. Some still seem to be available. It doesn't tighten down all the way to the back plate there is like a 1mm gap but I use extra long screws washers as spacers and loctite so it holds and works. The LRP roto start and pull start have a larger bolt pattern so it will not bolt to back plate. It will fit if you re drill the 4 holes to the correct location but I happened to have the Axial and it worked.

Hello, that is an italian Novarossi 528xsp .28 5 port pull start. Its pretty much the little brother to one of the best and most powerful engines ever made for Monster trucks. The big brother being the 528xr 8 port factory modified .28 with turbo plug.

I run a 2050kv on 6s with a Firma 150. 25:54 gearing Fits a 6s single pack. All these 3s and 4s setups are 🥱🥱🥱🥱🥱

My stampede quicker

What butteries did you run it on

Got the same kit in my stampede

Did you choke the engine at all? I usually use syringe with fuel line at the end. And push air to the fuel tank from pipe connection as long as the fuel reaches the carburetor and a bit in. That way you only need couple of pulls and the engine runs.

Hpi engines are made by force, the lack of pinch on the purple Mill is the sign of a worn liner and piston.

Awesome video! I just got a savage 21 for somewhat around the same price and I was having the same exact problems. I posted a few shorts on my channel but I’ll post more soon. My engine is pretty beat up so I bought a new Dynamite.28 for it and just installed it today. I couldn’t get a new piston or sleeve for the engine because the only one I found on eBay was over $150 for only the sleeve and piston! But after I put in the new dynamite .28, She started right up! Have fun and enjoy don’t give up on nitro! Everything takes time this will too hahah but I’ll be fun!!! Cheers

Pardon my ignorance (I’m still running stock)…what is “mod 1.5 gearing”, and what is the appeal?

Am throwing one of these in mine as my vxl esc caught fire, had to steal the connector from the old one as parents want to stick to traxxas batteries

Nice job. New bearings sure make a difference

Any issues with heat from the motor or esc when running 3s for extended periods? Great video btw 👌

Great vid enjoyed the editing of the run down of where all the money goes #rclife 😅