- Видео 40
- Просмотров 8 613
Jahee
Добавлен 30 июн 2012
Aligning new hub motor inside my old wheel rims.
Less then half a mm run-out, which I consider perfect for my application.
Used a whiteboard marker as an straightness check tool. That way, where it's getting lines, is where the unwanted bulge would be. Also no risk of damaging the rim itself.
Used a whiteboard marker as an straightness check tool. That way, where it's getting lines, is where the unwanted bulge would be. Also no risk of damaging the rim itself.
Просмотров: 54
Видео
Battery powered 12v desktop speakers - DIY conversion
Просмотров 302 месяца назад
I've bought some older Creative 2.1 desktop/computer speakers from a thrift store. I plan on adding them into my sailboat. These speakers by themself require about 20 watts of power. But if I would have connected these stock speakers to my Chineesium 500 watt 220 volts inverter, I'd be drawing about 35 watts from my batteries. Inside the subwoofer was the power supply. It contained a transforme...
Bought a riding mower, just for the 13 hp engine today.
Просмотров 2554 месяца назад
Bought this 13 hp flathead Briggs and Stratton engine today. Came with the rest of the mower. Already sold the rear wheels axles gearbox. Might sell the rest, or bring it to the scrapyard.
A look inside my near-free sailboat.
Просмотров 4494 месяца назад
A quick look at the inside of my near-free sailboat. The tiny solar panel seems to be charging a larger Varta battery, and everything seems functional. Will be ordering a bilge pump soon-ish. I also ended up measuring the boat, and it seems to be about 7.5 meters long.
Near free sailboat with 20 hp Yamaha outboard
Просмотров 1444 месяца назад
Bringing her home! Mint condition 20 hp Yamaha outboard engine with an former sailboat. Might record some more vids soon-ish.
VIKING MB 650.0 TK, with Kawasaki engine running
Просмотров 2 тыс.6 месяцев назад
Short vid of a VIKING (Stihl) MB 650.0 TK with Kawasaki engine running. Bought it as a non-runner. Cleaned the carb, and fixed a hose connecting the carb with the crank case. Because it had leaked oil everywhere near the carb, it had also shorted the off-switch, making it have no spark at all. The pull-cord was also once broken, making it near-impossible to start, because of the position of the...
How to transport a second bicycle (3 finger grip)
Просмотров 138 месяцев назад
People on a Discord server were asking how you'd transport a second bicycle. Some people came up with odd YT vids, where they would somehow hook the second bicycle onto the first one. There is zero need for it. Just a 3-finger-grip on the second bicycle's handlebar center is required. And while I was recording, I wasn't even holding onto the handlebars of the bicycle I did ride. To collect this...
VERY wide DIY bicycle crankshaft assembly test/show-off.
Просмотров 11011 месяцев назад
My DIY 4-stroke Briggs and Stratton Friction Drive bicycle, needed a much wider pedal assembly. With stock spacing, it would be hitting the engine from both sides. Pedal kits for motorized bicycles, would also be way to narrow. This main crankshaft tube ended up being 21 cm, and the crankshaft itself is even much more wide. Had to extend every part in this assembly, and I'm using connecting rod...
Made a roller for a friction drive motorized bicycle!
Просмотров 7411 месяцев назад
I'm in the process of building a motorized bicycle. It will have a 3 hp Briggs and Stratton lawnmower engine. To put the power to the rear wheel, I needed a roller to push onto the wheel. Went trough my pile of random metal, and came up with this. The shaft and bearing blocks themself, are 19 mm thick and solid. Sprocket has 10 teeth, and all these parts came from a "cage mower". The roller its...
Both Briggs and Stratton 3 hp engines running
Просмотров 587Год назад
Picked up the red Briggs and Stratton 3 hp, horizontal shaft engine up today. Had bought the white one about a year ago, but it had a rusted tank and broken carb. When I did some initial testing, the carb and spark of the red engine didn't work. Managed to clean both, and now it has spark and fuel. First time running both engines, where the white engine did just borrow the red carb tank. Engine...
Rip my drill after using a 73mm holesaw in metal...
Просмотров 323Год назад
This useless video is intended for my motorized bicycle project Discord server thread. Random video of my 800 watt corded drill releasing part of it's smoke. Was locked up. Opened the drill up, and saw black copper. But no longer locked up... Put everything back together, and it worked again. I wonder for how long.
Bicycle Rim Straightening tip: use a whiteboard marker
Просмотров 550Год назад
I replaced the rear wheel hub. Removed a single geared coaster brakes hub, for a Shimano Nexus 8 hub with rollerbrake. Everything went "fine", and I was eventually able to correct the most bends, and center the rim in the frame. (frame had to be bent about 5 cm too) Used a whiteboard marker zip-tied to the frame, to check for wobble. This way, there wasn't any risk of scratching up the rim (lik...
Noise maker 3000!!! (actually spoiler vid, I plan on editing a decent vid)
Просмотров 64Год назад
Budget DIY Discord server invite code: SMjdexY9ja
Dirt/Compost Sifter belt fix, and barrel is more stable!
Просмотров 138Год назад
Made a few modifications to my dirt/compost sifter, and it fixed the known issues. -Added a multiplex sidewall to my driving wheel, to prevent the belt running off. -Added a set of static guides in the bottom, just before the belt goes onto the driving wheel. -Added an adjustable freespin (bicycle wheel hub) belt guide on the top, to keep the belt in the belt guide on the drum. -Added a removab...
Testing new dirt sifter, it has belt issues.
Просмотров 47Год назад
Temporary setup, with some clamps. To do some testing, and checking alignment of the belt. But there are some other issues. The drum/barrel is moving from left to right. Which increases the belt issues I had. Tried to use a rope as a belt, which didn't work. It had near zero grip, so any load in the barrel would halt the barrel. (not recorded) When I tried to add more tension to the rope, the k...
Knock-knock, who's there!?! It be a scary Hooman!
Просмотров 28Год назад
Knock-knock, who's there!?! It be a scary Hooman!
Bettur 2023 all! (and birbs kinda watching fireworks)
Просмотров 312 года назад
Bettur 2023 all! (and birbs kinda watching fireworks)
New male birb for my female birb: first introductions
Просмотров 532 года назад
New male birb for my female birb: first introductions
Fishies, and how you're supposed to enjoy them.
Просмотров 492 года назад
Fishies, and how you're supposed to enjoy them.
Lawn-Boy model 8440 doing strange things, see description
Просмотров 1472 года назад
Lawn-Boy model 8440 doing strange things, see description
Birb watching her favorite Youtube channel.
Просмотров 172 года назад
Birb watching her favorite RUclips channel.
Piranha's attacking my window scrubber while trying to clean THEIR tank...
Просмотров 122 года назад
Piranha's attacking my window scrubber while trying to clean THEIR tank...
New guppies in my newly decorated aquarium!
Просмотров 153 года назад
New guppies in my newly decorated aquarium!
Lovebird enjoys Cheap Toy/lip of a can
Просмотров 483 года назад
Lovebird enjoys Cheap Toy/lip of a can
Volvo Penta 5 hp "51" test run after some fixes
Просмотров 7303 года назад
Volvo Penta 5 hp "51" test run after some fixes
Fireplace from an old gas bottle and scrap metal
Просмотров 943 года назад
Fireplace from an old gas bottle and scrap metal
boat entertainment system progressing, not bad
Wow thats nice Jahee good to see that you're out on the water 👍
Indeed! I also uploaded a short vid of the interior. That's not so mint, but the fiberglas hull, is in really good condition. Now I'm really evaluating what I'm going to do with this thing.
@@Jahee-Official wow thats cool hey cant beat almost free bro no conplaints there😆👍
My 5 hp has been sitting a long time, i get it to fire up but it goes into really high rpms at idle any idea how i can fix
On your carburetor are 2 valves. One is for the choke, this one should only be closed when you try to start the engine. The second valve is for speed control. High RPM's just NEED plenty of airflow. So if your engine has a "really high idle RPM", you might need to check if this valve closes all the way. It might be that your idle adjustment screw, needs to be adjusted. It might be that your throttle isn't able anymore to close the valve. Or there might be foreign items inside your carb, preventing the valve to be fully closed. You should also keep in mind: these older outboard engines are almost always 2-stroke. (this Volvo Penta is also) They always seem to idle a bit higher then more modern 4-stroke outboard engines. But yea, short bits in this vid, has the engine running at really low idle. If yours isn't capable of doing so, something is wrong.
1984?
Video saved to "Vids my cats like to watch" list.
There are also tubers who have 8+ hours of birbs doing birb things. When I had only this pet birb, I would occasionally put those long vids up when I would be going outside. Maybe your cats would enjoy such vids too.
So cute!
working great. good build sir.
Great idea, wonderful work.
Runs nice 😁👍
Thnx. Could probably be even better if I had fresh fuel in it. (this fuel is like 3-4 years old by now?) And the most important part, the pulley seems to run straight. Sleeve seems to do it's job.
Don’t come on our Chanel talking crazy weirdo
I’ve got one that spits water out around the shifter shaft. Been looking for a manual. Any help is appreciated. Thx.
I was only able to find a very partial manual for these engines. Don't remember where I've got them from. However, these engines are air cooled. No water should come up this high? This week I've made a very DIY engine stand for 3 outboard engines. So the 4th (in the back of the thumbnail) is going to be taken apart. If you're a bit more specific, I can take a look at that particular area, and tell you what I found.
Me keeping fish seems odd, considering I've got a fishphobia. But this is my way to be confronted by fish. Just above my desk, and on the other side, my bed. (this tank is placed inside a wall, visbibel from both sides)
vroom vroom
Awe he looks so sweet
hey jahee we've talked before and i was wondering if you'd discuss religion with me
If we've talked before, you've got my Discord name+tag. Add me as a friend, if we no longer have a shared server. These comments aren't the place for those kinds of conversations.
@@Jahee-Official im not sure what you mean by that? Perhaps you might remember me because of my pfp, you were in a server with me but your not their with me anymore, i would still like to talk to you tho. I just send u a friend request
hey jahee we've talked before and i was wondering if you'd discuss religion with me
i actually really love these videos
*you failed ;(*
Damn you put a lot of time in there
nice
ur defo gonna win
First.
Wow