Видео

I just picked up the hollyland lab mics so I’m gonna try that out. We are goi g to point pleasant in a couple weeks and I want to get some good night vision without syncing all the audio in post.

@@martinthibeaux317 that’s crazy. I never had a single issue with mine. Actually I just sold it to a friend because I upgraded. I would run mine all day and never had a problem. Weird

@@austinwilliams8174 no it doesn’t but if you look at the update video, someone in the comment section said they found a 7hp with forward, reverse, and neutral.

@@decardcain2549 oh good to know. How much was that one ?

@@lamefishing6716 I dunno in your country how much it cost as im from Malaysia it cost RM 2999 around USD700 via shopee which is comparable to Temu

@@decardcain2549 that’s sounds about right. I payed $750 US, so that’s about what I would expect.

Ya that sounds about right. Have you tested distance ?

@@lamefishing6716 I don't understand the question...

Have you tested to see how far one tank will take you ?

@@lamefishing6716 maximum speed it's 2 half hours, and regular speed it's for all day. If you alone it going longer distance

@@lamefishing6716 it is a small tank you need to add a gallon tank. With the small tank original it's about 2 half hours maxium speed non stop with 2 people and regulare speed, all day

@@RiverRat81 I think it would do just fine. I mean you won’t break any speed records but I only bought mine to be able to get a full day out on the water without having to worry about carrying the additional weight of another trolling motor battery for back up. So it’s really about distance, but if you’re expecting speed that’s not gonna happen.

I mean it’s an outboard so it’s going to be somewhat loud. It doesn’t bother me at all. It’s about what I would expect from a 7hp outboard. Maybe 50-60 decibels

@@lamefishing6716 Thanks!

@@williamgarcia1832 not yet. I might try towards the end of the fishing season

I believe it’s a short shaft.

What is the weight on the motor?

@magnussmitt I will reach out to the manufacturer. I am unable to find it on my own, I’ll get back to you

@@magnussmitt so I reached out to the manufacturer, the weight of the motor is 49 pounds. Also they said to let you know if you buy the motor they will offer you an 8% discount per Amazon regulation.

@@AndrewVigil-rq3cp thanks!

I’m not sure. I always keep mine on a stand when it’s not on my boat, so unfortunately I don’t know. Hopefully someone else can help with that in the comment section.

On a similar motor i saw the website selling them is to keep it upright but if you have to transport it lying down, slowly lay it down so that the gas tank is on the ground and the prop is lower than the head. Edit to add: make sure the fuel is low enough to not reach the vent in the gas cap, or it will leak gas

They are metal flag pole holders. At my Lowe’s they are up front kind of in the garden section. Where all the flags are. I looked at the extra one I bought so I went and looked. They are called “rain or shine” that’s the brand. Hope that helps

Also let me know how the pipes work out

I will. When I wrote that question I was just going in to Canadian Tire. I went to the boat section and they had something similar but, again, plastic. It also came with a pole and flag. I will try to find a couple of metal ones online. I'm only vaguely aware of how I'm going to attach the pipe, but I will keep you posted.

Ya I’m sure it does but I only use the outboard to get me where I’m going to fish. I like to be able to move around to different areas at my spot

@@mystreteacher I bought the cheap rhino liner type paint from Lowe’s and it has held up pretty well.

@@djmagicmixmistro3861 they are flag pole holders. I got them from Lowe’s. Probably $10 dollars each

@@outboards thank you for reaching out. I am thoroughly enjoying this outboard. You can communicate with me using my email lameproductions777@gmail.com.

ruclips.net/video/d1CGDXUaqyM/видео.htmlsi=RKPwMzQ9wkDb7HlJ

It would have been fine if not for all the coyotes or whatever

Thank you. That’s why I started the channel. I’m trying to learn and am willing to learn from my mistakes. So I appreciate the feedback.

@@lamefishing6716 i enjoy the content i maybe pulling the trigger on this motor because your review thanks for posting this and sharing info on it!

@@crowsgarage6669 no problem, and thanks for pointing that out. I’m just trying to figure all this stuff out and figured other people are too, so why not do it together.

I have taken the both plugs out on my outboard. Because the plugs are on the same site I fill when the motor is sideways on table. So I pour oil from the bottom hole and once I see the oil level on the top hole I know it is full. Then I turn the impeller few times to remove any air etc. I have 2 stroke motor and I use normal manual car gearbox oil 70-80w something. Haven't had any problems in 4 years.

Ya since then I went ahead and just got another small battery to run it. I was just trying to think of ways for people who couldn’t lift as much still be able to have a battery.

That’s awesome. I’m glad they worked out for you. Mine are a little shorter now that I broke them when the wind blew my boat into the dock, but they still get the job done

So when I first got it I didn’t know about adding the gear oil. I ran it a few times and no major damage but I would definitely recommend doing it. It not real difficult at all.

@@lamefishing6716 many thanks 👍 I'll do that ...mark UK

Ya that doesn’t make any sense. You shouldn’t need to mix the gas and oil. Maybe put in here a link to the one you bought. That may help. I looked on Amazon at what I think is yours but I don’t know. It says 4 stroke so that’s weird.

​@@lamefishing6716 thanks lookin man greatly appreciated yeah I guess I'm thinking power sport machine logic 4 wheelers etc ...... I guess for this stuff it's different

​@eddietrujillo224 if it has an oil stick it is 4 stroke.. if it doesn't, it's a 2 stroke and you need to use oil has mix.

I’m working on it now. Had some towing issues and couldn’t take it out. Finally got that resolved. I should have it finished up this week.

@lamefishing6716 awesome sounds good I'll be watching it

@@scottd8555 ya I want to take it out again and get some better shots on the water then I’ll put out the video

I got it on Amazon. They bumped the price up a little bit it’s $575 now, but the extra horsepower is worth it.

@@lamefishing6716 I agree! I can save up for a week and get something I'll be frustrated with for a few years, or wait 3 weeks and follow your advice. 🤜🤛

Take a look at the Cukusin 7.5 HP. I made a video on it. I’m working on an update video right now. Running fantastic

@@lamefishing6716 thank you! I'll find your other video, and looking forward to the update!

No you don’t need to shut it off. On mine when you lower the throttle all the way down that is the neutral position. So ya just lower the throttle all the way down

@@lamefishing6716 thank you sir!

Looks to be about 18.5 inches.

That’s good to hear. I’ve had some towing issues and I’m trying to work it out. So I haven’t had the motor on the water yet. I’m dying to get it out on the water. Sounds like I’m going to get the same experience in my 12 foot Jon boat

Not yet, but someone in the comment section took it out with 12 ft. Jon boat and went well. I think they said 7.5 mph and preformed well.

@lamefishing6716 I was hoping for a little more speed, but it probably depends on the boat. I have a 14.1 foot Bris kaboat inflatable that weighs about 100 pounds.

@stevefeldman4996 ya that’s what I said but I might mess with the governor

Let me know how it goes. I'm the guy that commented earlier. I'm looking at an inflatable. My current boat pushes like a brick. It a sun dolphin American 12​@@stevefeldman4996

I plan on doing a follow up. I put a hitch on my golf cart at the campground so I can launch the Jon boat. I’ll definitely make an update video soon.

Ya that’s a good idea, I was trying to watch the weight

Most definitely. I appreciate the feedback. All of this is new to me and I’m trying to learn and I appreciate it when people tell me the right way to do it. Thank you

He's correct on this... top hole is full level... pump in from bottom hole

I haven’t had it in the water yet. But mine seems to run smooth on the stand

Freshwater, lakes and ponds.

Not a problem. Just trying to help, after all that’s what RUclips is for right ?

Got it today! And ...... The temperature dropped to the 20s😢 from 70 to 20s in 5 hrs

@Dmoormans5 ya that sucks, I still got a few weeks before I can go out. Was gonna try next week but doesn’t look like it’s gonna happen.

@@lamefishing6716 7.3 mph on a American 12 jon boat

@@Dmoormans5 good to know. How much weight in the boat ?

That would be great. It’s so frustrating because there are days where it’s 57 degrees and I wish my boat wasn’t in storage because I would go get it and fish. But maybe another month and we’re good

So I googled what the weight capacity of your boat is. It says 580 pounds. I dont know that I would even try to come close to 1,000 pounds. The most I’ve had in my boat is around 550 pounds with my brother and I. It did fine but even with 4 of those stabilizers if you try to put your wife on there too I don’t think she will ever get on there again. What are you carrying that weighs 1,000 pounds ?

My boat is listed at 500lbs as well and myself + my fishing partner go over that by 200lbs as I'm about 250 and he is in the 400 range. Combine that with the 130lb kiddo and we still roll out without outrigger. Definitely thinking about these 😂. May make my trips safer!

They work great. They will definitely at least help with that

That’s great. Ya I ended up breaking mine in a little closer and doubled up with the float pods. I have two on either side of the deck and then two in the midsection now. The ones on the deck are only kept on with a tie down. Works great. Don’t want anymore holes in my boat.