Видео

Of course, glad our video was able to help!

Great question! Yes, you're able to select all of the cells and paste in them at once.

Yes, we also sell the Epson C6000! The Epson C4000 and C6000 have a similar printing cost. If you're interesting in comparing the two, go to this link and click "compare model" under each printer: www.smithcorona.com/inkjet-labels/epson-colorworks-printers.html

So glad we were able to help you make an informed decision!

We're so glad to hear our video was helpful!

Check out our Epson C4000 ink cartridges here! Remember to choose the right type-matte or gloss black: www.smithcorona.com/inkjet-labels/epson-colorworks-ink-cartridges/epson-colorworks-cw-c4000-gloss-ink-cartridges.html Regarding the ink cost per label, it's difficult to provide a precise figure as it varies depending on the label size and design.

No bother at all! The Epson C4000 doesn’t include label design software, you’ll need to purchase that separately. However, it does come with a label driver, which lets you adjust alignment, colors, tear-off settings, and more. Let us know if you have any other questions!

Can I print designs from kittl?​@@SmithCoronaLabels

As for the required thickness, we are checking with our Epson contact. We will let you know!

The Epson printers can handle thicknesses from 5 mils to 9 mils. Hope this helps!

Ok thank you very much

Hello! Is the button on the top of the printer changing colors at all?

If you click this link, it will take you to the current listing price for the Epson C4000! www.smithcorona.com/inkjet-labels/epson-colorworks-printers/epson-colorworks-cw-c4000-color-inkjet-label-printer-matte.html

Hello! Unfortunately, the Epson C4000 cannot print on vinyl and PET labels. If you need durability, it can print on a durable synthetic or a polypropylene label. Please let us know if you have any other questions about materials!

Hi thank u for your reply, can i get pictures fir polypropylene label. Do you have transparent polypropylene label

If you click on this link, it will take you to our inkjet roll label offerings: www.smithcorona.com/inkjet-labels/inkjet-roll-labels.html Under Materials, you are able to select polypropylene, and from there you can see the images. And we could potentially make transparent polypropylene labels, but it would be a custom order. You can request a quote on our website at www.smithcorona.com/custom-labels.html, or give us a call at 1-800-875-7000!

We're so happy that our video could help!

We would recommend looking at your specific Brother printer's compatibility to make sure!

We're so sorry to hear that Microsoft Word's free version doesn't give you the option to make labels! It looks like there's a free 30 day trial, maybe you could try that? We hope this helps!

Hello! Could you explain what you mean by "with names only"? And since you are using A4 sheets, when you are choosing your page size (00:35) just make sure you click on A4!

​@@SmithCoronaLabels by names, I mean that I only want to print different names(of invitees) in those boxes without any graphics and addresses. But, when I am doing so ' there's some space left in the boxes.

Do you mind emailing knepshield@smithcorona.com a screenshot of the issue you're having so we can be of more help? Thanks!

Hello! We contacted Zebra about this and they provided a couple of links for you to follow: Link to Mac OS Driver: www.zebra.com/us/en/support-downloads/printers/desktop/ZD200t.html?downloadId=6b7275f4-ef4a-4692-a63f-f5439158e44f#Tab-item-c2a6efb0e9-tab How to Install Driver: supportcommunity.zebra.com/s/article/Install-CUPS-driver-for-Zebra-Printer-in-Mac-OS?language=en_US Information About Driver: www.zebra.com/content/dam/support-dam/en/documentation/unrestricted/guide/software/ZSN108111-v4_CUPS_Installation.pdf We hope this helps! Please let us know if you have any other questions.

Great question! When you first get an Epson ColorWorks printer, it goes through an ink installation process that will use up about half of your maintenance box and a significant amount of ink. This only happens during the initial setup, so we recommend purchasing an extra set of ink and an additional maintenance box when you buy your printer. We hope this helps!

Awesome, we're so glad we could help! 🥳

We'll take note for the future 😅

Hello! The space between the labels is called the "horizontal pitch". If you skip to 1:56, it shows you where to enter that information to create the space between the labels. Let us know if this helps!

Hello! All of the labels used in this video can be found here: www.smithcorona.com/shop-by-printer/zebra-printer/zd220.html Please let us know if you need any help!

Thanks so much! We're happy to hear our video was helpful!

Hello! It all depends on the sheet labels that you are printing on. Either measure with a ruler or check with the manufacturer you purchased your labels from!

We haven't tested the Microsoft Word phone app, so we can't confirm for sure. However, given the number of steps involved, it would likely be much easier to do this on a desktop rather than a phone!

Hello! The Zebra ZD220 can print on 2" x 1", 4" x 6", and 2" round labels! Sometimes round labels are tricky, but as long as you load them correctly and calibrate your printer, they should print just fine. Just make sure you are using direct thermal labels!

Sure! The one we used in this video is from DPR Labeling, but there are several different brands that sell these attachments.

Hey! You don't have the mailings tab on your version of Microsoft Word? Any idea what version you're using?

Good question! The Zebra ZD220 is a direct thermal printer, which means there is no ink or toner. You have to use direct thermal labels which already have ink inside of the label, and when heat is applied, the image is created. This video explains direct thermal more in depth: ruclips.net/video/_uhN2z1nBVg/видео.html Let us know if you have any questions!

Thanks so much , we appreciate it!

Hello! So your ZD220 is just printing blank labels? What color is the LED light while this happens?

We'd be curious to hear more about your experience with the C6500A! What size and type of media were you using?

Good question! Here's a link to the size ribbon that can fit in the Zebra GK420T: www.smithcorona.com/ribbons/zebra-thermal-transfer-ribbons/4-33-x-244-wax-ribbon.html Let us know if this helps!

Hey! You don't have the mailing tab on your version of Microsoft Word? Any idea what version you're using?

Thanks so much, we're so glad our video was helpful!

So glad our video was helpful!

Whoo hoo! So glad we could help 🥳

then why are you here asking for help ? mtcheww

Of course, so glad we were able to help!

We're sorry to hear your issue is worse! Could you let us know the problem you're experiencing so we can try to help?

Unfortunately, the ZD220 does not have bluetooth capabilities.

Are you using a new label size?

@@SmithCoronaLabels no it’s the same we’ve always used. We had the IT team come and update a bunch of stuff because the CDK cyberattack. Idk if that had anything to do with it. Like I said though it printed my first few fine, then everything randomly started printing off center. Tried again today but still same thing.

@@MoHawkAnakin I would try contacting Zebra themselves to see if they can help you troubleshoot since calibrating the printer did not work.

Hi there! After researching this a bit, we weren't able to come up with a clear answer when using Word. If you're using Photoshop, you could look into creating clipping masks, but we're not sure how this will transfer over when printing. Let us know if you end up finding a solution!

@@SmithCoronaLabels thank you! I’ll give it a try 🤗