MECH TECH12
MECH TECH12
  • Видео 32
  • Просмотров 2 125 042
CNC Operator Training | Types of CNC Machines | Scope of CNC Operator | CNC Operator Salary |
Hello Dosto
iss video CNC operator Training video me hum dekhenge ki hum ek perfect cnc operator kaise ban sakte hai. or iss video me dikhaya hai ki cnc machine kitne prakarki hoti hai? How many types of CNC machines are available in India? like CNC turning center, CNC machining center, cnc plasma cutting machine, cnc router machine, cnc drilling machine, cnc edm, cnc grinding machine, turn-mill center, vmc 5 axis, vmc 7 axis, cnc 3d printing machine, cnc laser cutting machine, or bahut sare. dosto hume ye bhi dekhenge ki agar hum cnc machine operate karna sikh jate hai to hume kitna salary mil sakta hai? hum ye bhi dekhenge ki cnc setter or cnc programmer ka salary kitna hota hai? hum cnc...
Просмотров: 6 337

Видео

LIVE CNC JOB TURNING VIDEO WITH CNC TOOLING SELECTION |TYPES OF CNC OPERATIONS, TOOLING, AND INSERTS6:45LIVE CNC JOB TURNING VIDEO WITH CNC TOOLING SELECTION |TYPES OF CNC OPERATIONS, TOOLING, AND INSERTS
LIVE CNC JOB TURNING VIDEO WITH CNC TOOLING SELECTION |TYPES OF CNC OPERATIONS, TOOLING, AND INSERTS
Просмотров 5 тыс.3 года назад
Hello Dosto, Aaj ke iss video me mene ek pin turning job ka live CNC turning video uske tooling selection ke sath aapko dikhaya hai. is CNC turning video me hum dekhenge ki kaise maine G71 stock removal cycle ka use karke TNMG Insert se rough OD turning or rough ID turning, U drill ki madad se Drilling or Id boring operation, finish od turning, vnmg insert se step id turnig and radius turnig or...
G71 ID Roughing Canned Cycle || G70 Bore Or ID Turning Finishing Cycle Programming In Hindi8:48G71 ID Roughing Canned Cycle || G70 Bore Or ID Turning Finishing Cycle Programming In Hindi
G71 ID Roughing Canned Cycle || G70 Bore Or ID Turning Finishing Cycle Programming In Hindi
Просмотров 18 тыс.4 года назад
Hello Dosto, Aak ke is video G71 Stock Removal Roughing Canned Cycle For ID And G70 Finishing Cycle For Bore Profile Ke Iss Video Me Hum Dekhenge Ki Agar Hume G71 ID Turning Canned Cycle Boring Operation Me Karna Hai To Uska Cnc Program Kaise Banta Hai Or Ussi Bore Or ID Ke Profile Ko Agara Hume G70 Finishing Cycle Ka Use Karke Bore Ko Final Karna Hai To Uska Cnc Programming Step By Step Kaise ...
Cnc Machine Programming And Cnc Machine Training Course For Cnc Operator/ Cnc Setter/ Cnc Programmer8:19Cnc Machine Programming And Cnc Machine Training Course For Cnc Operator/ Cnc Setter/ Cnc Programmer
Cnc Machine Programming And Cnc Machine Training Course For Cnc Operator/ Cnc Setter/ Cnc Programmer
Просмотров 19 тыс.4 года назад
Hello Dosto, Iss Video Cnc Machine Programming And Cnc Machine Training Course For Cnc Operator/ Cnc Setter/ Cnc Programmer Mene Dikhaya Hai Ki Agar Hame Ek Complete Cnc Machine Ka Course Online Karna Hai To Kaise Sikh Sakte Hai. Mech Tech12 Ke Iss Cnc Video Channel Par Ab Hum Step By Step Cnc Operator Training Or Cnc Setter Or Cnc Programmer Ki Training Ke Video Series Upload Karenge Taki Hum ...
How To Change Fanuc CNC & VMC Machine Battery And Set Or Backup Cnc Reference Or Home Position Data10:48How To Change Fanuc CNC & VMC Machine Battery And Set Or Backup Cnc Reference Or Home Position Data
How To Change Fanuc CNC & VMC Machine Battery And Set Or Backup Cnc Reference Or Home Position Data
Просмотров 9 тыс.4 года назад
Hello Dosto, Iss Video How To Change Fanuc CNC & VMC Machine Battery And Set Or Backup Cnc Reference/Home Position Data. Ke Iss Video Me Maine Dikhya Hai Ki Agar Hamara Cnc Machine Is Lockdown Ya To Fir Kafi Dino Se Power Off Hai To Usme APC Battery Backup Ka Problem Hume Face Karna Padega Or Use Problem Ki Vajah Se Cnc Or Vmc Machine Ka Reference Point Yani Home Position ka Data Lost Ho Jayega...
Transfer/Convert/Copy And Run Any Fanuc CNC Program To Siemens Or Siemens CNC Program To Fanuc CNC7:38Transfer/Convert/Copy And Run Any Fanuc CNC Program To Siemens Or Siemens CNC Program To Fanuc CNC
Transfer/Convert/Copy And Run Any Fanuc CNC Program To Siemens Or Siemens CNC Program To Fanuc CNC
Просмотров 17 тыс.4 года назад
Hello Dosto, Iss Video How To Transfer, Convert, Copy, Load And Run Any Fanuc CNC Program To Siemens Controller And Siemens CNC Program To Fanuc Controller Me Hum Dekhenge Ki Agar Hame Fanuc Controller Ka Koy Bhi CNC Program Ko Agar Hame Siemens Controller Par Chalana Hai To Use Hum Siemens Controller Par Simple Tarike Se Kaise Convert Kar Sakte Hai. Or Agar Hame Siemens Controller Ka Program F...
How To Make Basic Cnc Programming With Roughing Cuts And Basic Cnc Program With Graph In Hindi16:22How To Make Basic Cnc Programming With Roughing Cuts And Basic Cnc Program With Graph In Hindi
How To Make Basic Cnc Programming With Roughing Cuts And Basic Cnc Program With Graph In Hindi
Просмотров 18 тыс.6 лет назад
Hello Dosto, Ajj Ke Iss Video How To Learn Or Make Cnc Basic Programming With Rough Turning Cuts And With Basic Cnc Program Graph Me Maine Dikhaya Hai Ki Agar Hume Profile Job Ke Rough Cuts Manually Calculate Karne Hai Yani Ki Cnc Profile Job Ke Rough Cut G71 Stock Removal Canned Cycle Ka Use Kiye Bina Hi Rough Cut Program Karne Hai To Kiss Tarah Se Kar Sakte Hai. Iss Basic Cnc Program Ke Video...
G73 Pattern Repeating Stock Removal Canned Cycle For Cnc Machine Programming In Hindi11:57G73 Pattern Repeating Stock Removal Canned Cycle For Cnc Machine Programming In Hindi
G73 Pattern Repeating Stock Removal Canned Cycle For Cnc Machine Programming In Hindi
Просмотров 40 тыс.6 лет назад
Hello Dosto, Ajj Ke Iss Video Cnc Programming For G73 Pattern Repeating Canned Cycle In Hindi Ke Iss Video Me Hum Dekhenge Ki Gagar Hume Cnc Machine Me Pattern Repeating Canned Cycle O.d Or I.d Me Roughing Ke Liye Use Karna Hai To Kiss Tarah Se Usko Program Kiya Jata Hai. G73 Pattern Repeating Canned Cycle Ke Iss Video Me Hum Dekhenge Ki G71 Stock Removal Canned Cycle Or G73 Pattern Repeating C...
Cnc Machine Programming Without Drawing Coordinates Or Direct Drawing Dimension Program14:25Cnc Machine Programming Without Drawing Coordinates Or Direct Drawing Dimension Program
Cnc Machine Programming Without Drawing Coordinates Or Direct Drawing Dimension Program
Просмотров 14 тыс.6 лет назад
Hello Dosto, Ajj Ke Iss Video Cnc Machine Programming Without Drawing Coordinates Or Direct Drawing Dimension Program Ke Iss Video Me Hum Dekhne Vale Hai Ki Agar Hame Job Ke Drawing Me Cnc Program Ke Liye Sare Co-ordinates Nahi Diye hai Or Hame Job Drawing Ke Uper Se Coordinates Ka Calculation Nahi Ata Yani Ki Ek Regular Cnc Programming Me Jo Point To Point Program Banta Hai Uske Liye Sare Dime...
How To Setup New Job On Cnc Machine Or Setting Up New Job On Cnc Machine In Hindi10:18How To Setup New Job On Cnc Machine Or Setting Up New Job On Cnc Machine In Hindi
How To Setup New Job On Cnc Machine Or Setting Up New Job On Cnc Machine In Hindi
Просмотров 50 тыс.6 лет назад
Hello Dosto, Ajj Ke Iss Video How To Setup A New Job On Cnc Machine Or Setting Up New Work Piece On Cnc Machine Ke Iss Video Me Maine Dikhaya Hai Ki Agar Hame Cnc Machine Par Ek New Job Or Component Ka Setting Karna Hai To Step By Step Kaise Katre Hai. New Job Setup Or New Work Piece Setting Up Ke Iss Video Me Maine 10 Step Me Job Setting Procedure Ko Dikhaya Hai Jaise Ki Job Drawing Or Job Sam...
Unboxing Of New Cnc Machine And Installation Of New Cnc Machine In Hindi7:57Unboxing Of New Cnc Machine And Installation Of New Cnc Machine In Hindi
Unboxing Of New Cnc Machine And Installation Of New Cnc Machine In Hindi
Просмотров 12 тыс.6 лет назад
Hello Dosto, Aaj Ke Is Video Unboxing Of New Cnc Machine And Installation Of New Cnc Machine In Hindi Me Hum Dekhenge Ki Agar Hum Ek Naya Cnc Machine(Buy)Kharid Te Hai To Uski Unboxing Kaise Hoti Hai Or New Cnc Machine Ka First Installation Kis Tarah Se Kiya Jata Hai. Iss Cnc Unboxing Or Cnc Installation Ke Video Me Hum Ye Bhi Dekhenge Ki Ek New Cnc Machine Ko Load Or Unload Crane Se Kaise Kiya...
How To Make G70 Finishing Cycle And G72 Facing Canned Stock Removal Cycle For Cnc Machine In Hindi13:40How To Make G70 Finishing Cycle And G72 Facing Canned Stock Removal Cycle For Cnc Machine In Hindi
How To Make G70 Finishing Cycle And G72 Facing Canned Stock Removal Cycle For Cnc Machine In Hindi
Просмотров 46 тыс.6 лет назад
Hello Dosto, Ajj Ke Iss Video How To Make G70 Finishing Cycle And G72 Facing Stock Removal Canned Cycle For Cnc Lathe Machine In Hindi Ke Iss Video Me Hum Dekhenge Ki Cnc Machine Me Canned Cycle Kya Hai Or Use Kis Tarah Se Program Kiya Jata Hai Or G72 Stock Removal Facing Cycle Ko Kis Tarah Se Banaya Jata Hai. G70 Finishing Or G72 Facing Canned Cycle Ke Iss Video Me Hum Uske Error Or Program Pr...
What Is Canned Cycle And How To Use G71 Stock Removal Canned Cycle For Cnc Lathe Machine In Hindi15:25What Is Canned Cycle And How To Use G71 Stock Removal Canned Cycle For Cnc Lathe Machine In Hindi
What Is Canned Cycle And How To Use G71 Stock Removal Canned Cycle For Cnc Lathe Machine In Hindi
Просмотров 80 тыс.6 лет назад
Hello Dosto, Ajj Ke Iss Video What Is Canned Cycle and How To Make And Use G71 Stock Removal Canned Cycle For Cnc Lathe Machine In Hindi Ke Iss Video Me Hum Dekhenge Ki Cnc Machine Me Canned Cycle Kya Hai Or Use Kis Tarah Se Program Kiya Jata Hai Or Stock Removal Cycle Ko Kis Tarah Se Banaya Jata Hai. G71 Canned Cycle Ke Iss Video Me Hum Uske Error Or Program Problem Or Solving Bhi Dekhenge Or ...
What Is Cnc Machine Cutting Speed, Feed, Rpm And Depth Of Cut And How It Is Calculate In Cnc Hindi19:41What Is Cnc Machine Cutting Speed, Feed, Rpm And Depth Of Cut And How It Is Calculate In Cnc Hindi
What Is Cnc Machine Cutting Speed, Feed, Rpm And Depth Of Cut And How It Is Calculate In Cnc Hindi
Просмотров 207 тыс.6 лет назад
Hello Dosto, Aaj Ke Is Video What Is Cnc Machine Cutting Speed, Feed, Spindle Speed Rpm And Depth Of Cut And How It Is Calculate In Hindi Ke Is Video Me Hum Dekhne Vale Hai Ki Cnc Machine Me Speed, Cutting Speed, Surface Speed, Rpm Or Depth Of Cut Kya Hai Or Iska Upyog Cnc Programming Me Kaise Kiya Jata Hai. Is Video Me Aap Dekh Sakenge Ki Mai Ne Cnc Machine Ki Cutting Speed (VC), Surface Speed...
How To Use Tool Nose Radius Compensation G40, G41, G42 On VMC And CNC Lathe Machine Programming12:59How To Use Tool Nose Radius Compensation G40, G41, G42 On VMC And CNC Lathe Machine Programming
How To Use Tool Nose Radius Compensation G40, G41, G42 On VMC And CNC Lathe Machine Programming
Просмотров 63 тыс.6 лет назад
Hello Dosto, Ajj Ke Iss Video How To Use Tool Nose Radius Compensation G40,G41,G42 On VMC And CNC Lathe Machine Ke Iss Video Me Hum Dekhenge Ki Tool Nose Radius Or Cutter Radius Compensation Vmc Or Cnc Lathe Machine Par Uska Use Yani Program Kaise Kiya Jata Hai. Matalab Ki Agar Hume G41 Or G42 Ka Use Program Me Karna Hai To Kaise Kiya Jata Hai. G40,G41 Or G42 Ke Iss Video Me Hum Dekhenge Ki Too...
How To Select Proper Cutting Tools And Insert For Cnc Machine Hindi12:21How To Select Proper Cutting Tools And Insert For Cnc Machine Hindi
How To Select Proper Cutting Tools And Insert For Cnc Machine Hindi
Просмотров 75 тыс.6 лет назад
How To Select Proper Cutting Tools And Insert For Cnc Machine Hindi
How To Make Siemens Threading Cycle97 Or Thread Cutting Programme For Cnc Machine Hindi10:50How To Make Siemens Threading Cycle97 Or Thread Cutting Programme For Cnc Machine Hindi
How To Make Siemens Threading Cycle97 Or Thread Cutting Programme For Cnc Machine Hindi
Просмотров 23 тыс.6 лет назад
How To Make Siemens Threading Cycle97 Or Thread Cutting Programme For Cnc Machine Hindi
How To Make G76 Threading Cycle Or Thread Cutting Programme For Cnc Machine Hindi15:21How To Make G76 Threading Cycle Or Thread Cutting Programme For Cnc Machine Hindi
How To Make G76 Threading Cycle Or Thread Cutting Programme For Cnc Machine Hindi
Просмотров 116 тыс.6 лет назад
How To Make G76 Threading Cycle Or Thread Cutting Programme For Cnc Machine Hindi
How To Set Parameter Or Part Count, Tool Wear Range In Cnc Machine Hindi7:35How To Set Parameter Or Part Count, Tool Wear Range In Cnc Machine Hindi
How To Set Parameter Or Part Count, Tool Wear Range In Cnc Machine Hindi
Просмотров 48 тыс.6 лет назад
How To Set Parameter Or Part Count, Tool Wear Range In Cnc Machine Hindi
How To Calculate Chamfer And Taper Angle For Cnc Programming In Hindi6:41How To Calculate Chamfer And Taper Angle For Cnc Programming In Hindi
How To Calculate Chamfer And Taper Angle For Cnc Programming In Hindi
Просмотров 89 тыс.6 лет назад
How To Calculate Chamfer And Taper Angle For Cnc Programming In Hindi
How To Calculate Radius Or Any Arc Length Dimensions For Cnc Programming In Hindi11:10How To Calculate Radius Or Any Arc Length Dimensions For Cnc Programming In Hindi
How To Calculate Radius Or Any Arc Length Dimensions For Cnc Programming In Hindi
Просмотров 88 тыс.6 лет назад
How To Calculate Radius Or Any Arc Length Dimensions For Cnc Programming In Hindi
What Is M Code In Cnc Machine? | How To Use M Code In Cnc Machine Programming In Hindi | MDI M code10:47What Is M Code In Cnc Machine? | How To Use M Code In Cnc Machine Programming In Hindi | MDI M code
What Is M Code In Cnc Machine? | How To Use M Code In Cnc Machine Programming In Hindi | MDI M code
Просмотров 18 тыс.6 лет назад
What Is M Code In Cnc Machine? | How To Use M Code In Cnc Machine Programming In Hindi | MDI M code
What Is M Code In Cnc Machine? | How To Use M Code In Cnc Machine In Hindi | M Code For MDI12:25What Is M Code In Cnc Machine? | How To Use M Code In Cnc Machine In Hindi | M Code For MDI
What Is M Code In Cnc Machine? | How To Use M Code In Cnc Machine In Hindi | M Code For MDI
Просмотров 59 тыс.6 лет назад
What Is M Code In Cnc Machine? | How To Use M Code In Cnc Machine In Hindi | M Code For MDI
What Is G code? How To Use G Code In Cnc Programming With Example In Hindi11:17What Is G code? How To Use G Code In Cnc Programming With Example In Hindi
What Is G code? How To Use G Code In Cnc Programming With Example In Hindi
Просмотров 34 тыс.6 лет назад
What Is G code? How To Use G Code In Cnc Programming With Example In Hindi
What Is G Code? And How To Use G Code In Cnc Programming In Hindi13:45What Is G Code? And How To Use G Code In Cnc Programming In Hindi
What Is G Code? And How To Use G Code In Cnc Programming In Hindi
Просмотров 157 тыс.6 лет назад
What Is G Code? And How To Use G Code In Cnc Programming In Hindi
How To Set Tool Offset Or Work Offset For Boring Tool On Siemens Controller Cnc Machine In Hindi8:44How To Set Tool Offset Or Work Offset For Boring Tool On Siemens Controller Cnc Machine In Hindi
How To Set Tool Offset Or Work Offset For Boring Tool On Siemens Controller Cnc Machine In Hindi
Просмотров 67 тыс.6 лет назад
How To Set Tool Offset Or Work Offset For Boring Tool On Siemens Controller Cnc Machine In Hindi
How To Set Tool Offset Or Work Offset On Cnc Machine In Hindi7:09How To Set Tool Offset Or Work Offset On Cnc Machine In Hindi
How To Set Tool Offset Or Work Offset On Cnc Machine In Hindi
Просмотров 176 тыс.6 лет назад
How To Set Tool Offset Or Work Offset On Cnc Machine In Hindi
How To Make CNC Program On Siemens Controller Cnc | How To Check Siemens Program Graph In Cnc Hindi5:51How To Make CNC Program On Siemens Controller Cnc | How To Check Siemens Program Graph In Cnc Hindi
How To Make CNC Program On Siemens Controller Cnc | How To Check Siemens Program Graph In Cnc Hindi
Просмотров 46 тыс.6 лет назад
How To Make CNC Program On Siemens Controller Cnc | How To Check Siemens Program Graph In Cnc Hindi
How To Check Or Set Cnc Program Graph In Cnc Machine Hindi | How To Use Machine Lock In Cnc Machine6:43How To Check Or Set Cnc Program Graph In Cnc Machine Hindi | How To Use Machine Lock In Cnc Machine
How To Check Or Set Cnc Program Graph In Cnc Machine Hindi | How To Use Machine Lock In Cnc Machine
Просмотров 47 тыс.6 лет назад
How To Check Or Set Cnc Program Graph In Cnc Machine Hindi | How To Use Machine Lock In Cnc Machine
How To Make CNC Program In Hindi | How To Make CNC Programming In Hindi9:51How To Make CNC Program In Hindi | How To Make CNC Programming In Hindi
How To Make CNC Program In Hindi | How To Make CNC Programming In Hindi
Просмотров 246 тыс.6 лет назад
How To Make CNC Program In Hindi | How To Make CNC Programming In Hindi

Комментарии

  • @AnnaiahH-y1z
    @AnnaiahH-y1z 28 дней назад

    Hi sir, i am working on hwacheon vtl 650 m/c. And tool nose radios composition use every z length 0.3 more in actual size in z problem please help me sir,,, how to use and corection g41 and g42 use

  • @bipinrajbhar1935
    @bipinrajbhar1935 Месяц назад

    Nice video sir

  • @rupsinghrajput1564
    @rupsinghrajput1564 2 месяца назад

    Fanuc turning cycle Siemens control pe copy paste krke starting main G291 ADD KR KE PROGRAM RUN HO SKTA HAIN KYA SIR

  • @mr.mullani07
    @mr.mullani07 7 месяцев назад

    Sir inlegal command alarm aa raha hai kaisa alarm kb aata hai G71 ki cycle me

  • @Ashvinipandit963
    @Ashvinipandit963 7 месяцев назад

    Sar me CNC programming trening karta hu pr programming samjh me ni aa rha

  • @riazjakaria9012
    @riazjakaria9012 8 месяцев назад

    Sir how to connect stabilizer in cnc machine

  • @desichora0704
    @desichora0704 9 месяцев назад

    What is vc

  • @ravindraupadhyay559
    @ravindraupadhyay559 9 месяцев назад

    Radius ka sath angal ka use nahi Kiya hai

  • @matiyaharasukh3763
    @matiyaharasukh3763 Год назад

    Thank you

  • @lalitkuntal1806
    @lalitkuntal1806 Год назад

    Fanuc program mein LIMS ka use he nahi hota

  • @ranapratapsingh9417
    @ranapratapsingh9417 Год назад

    Direct drawing dimensions programing Radius and Angle kaise nikalege

  • @chilamalasubbucnc
    @chilamalasubbucnc Год назад

    Thank you

  • @RamanHeer818
    @RamanHeer818 Год назад

    How this is possible 275 m/ minutes I think 1000 is in formula to convert metre in mm

  • @RajivKumar-ts5ij
    @RajivKumar-ts5ij Год назад

    Study reset ka m code kya hoga

  • @RajivKumar-ts5ij
    @RajivKumar-ts5ij Год назад

    Nice video

  • @9926630901
    @9926630901 Год назад

    Badiya

  • @ramrajgor1001
    @ramrajgor1001 Год назад

    Sir tool show nahi karte ho aap

  • @mehulpatil2091
    @mehulpatil2091 Год назад

    Bahut hi achha

  • @yogeshpatil9399
    @yogeshpatil9399 Год назад

    CNC tooling ka video kijiye

  • @annaiahh1714
    @annaiahh1714 Год назад

    G73 cycle use kega

  • @deepakkannaujiya6662
    @deepakkannaujiya6662 Год назад

    Good evening sir 🙏 Mujhe kucch puccha tha aap se {Rpm×feed=Vc }bol sakte hai kya Kyoki Vc =(3.14×D×N)÷1000 hota hai Ye dono ko leke Confusion tha Please reply me 🙏🙏🙏 नमस्ते sir

  • @khemchandthakur7577
    @khemchandthakur7577 Год назад

    I learned that

  • @_NaimishMakwana
    @_NaimishMakwana Год назад

    G74 and G75 cycle deep me bataye

  • @Mdali-tr1sk
    @Mdali-tr1sk Год назад

    Sir aapka channel telegram channel search karne se nahi aa raha hai channel kaise join kare

  • @venkateshk1455
    @venkateshk1455 Год назад

    Very well explained sir thank you sir

  • @AkhileshYadav-rt9kb
    @AkhileshYadav-rt9kb Год назад

    Good sir

  • @surajkhandekar9076
    @surajkhandekar9076 Год назад

    ball ka 71 cycle program dikhaye

  • @surajkhandekar9076
    @surajkhandekar9076 Год назад

    aap bahot acha samjate hai practical sath👍

  • @ashupandey4219
    @ashupandey4219 Год назад

    EN 19 material ki lea koin se grade ki insert lgaye boring operation me

  • @mahakalmanan3511
    @mahakalmanan3511 Год назад

    G01 se ball radius ka pgrammig banaey

  • @stcreation9012
    @stcreation9012 Год назад

    Sir maine cnc programing sikha hai par practical knowledge nahi hai... To job mil sakti hai kyaa

  • @abhiramsinghchauhan7989
    @abhiramsinghchauhan7989 Год назад

    सीएनसी ऑपरेटर चेंज करने के लिए फुल बताते हैं

  • @aJaYgUpTa-pz3sz
    @aJaYgUpTa-pz3sz Год назад

    thanku sir

  • @upendrasaw280
    @upendrasaw280 Год назад

    CNC cutting machine me coding define kare

  • @rahulrao3665
    @rahulrao3665 Год назад

    Thank s

  • @mohanjadhav2182
    @mohanjadhav2182 Год назад

    Normal understand... .. .

  • @Jaspreetsingh-cr6qs
    @Jaspreetsingh-cr6qs Год назад

    How to copy contour prpgram file from seimens

  • @Deepak_lofii.
    @Deepak_lofii. Год назад

    Hi sir M Deepak From gujrat Mujhe cnc machine programming seekhna h Aur so plz contact me plz

  • @Deepak_lofii.
    @Deepak_lofii. Год назад

    So super extra actrective and very clearly set in my mind in 2min actually very good 👍

  • @Deepak_lofii.
    @Deepak_lofii. Год назад

    Good 👍 I have some help In cnc machine programming

  • @wanderer-bhupinder
    @wanderer-bhupinder Год назад

    Thanks sir

  • @udaybudha8066
    @udaybudha8066 Год назад

    Hi sir ye machine pe manuly front side stoper ka kaisa program karna hai

  • @RS2Entertainment
    @RS2Entertainment Год назад

    Tq sir

  • @yashgosai9060
    @yashgosai9060 Год назад

    🙏सर प्लीज हमे siemens 802d में stock removal cycle and contur cycle सिखाइए 🙏

  • @yashgosai9060
    @yashgosai9060 Год назад

    🙏सर प्लीज हमे siemens 802d में stock removal cycle and contur cycle सिखाइए 🙏

  • @yashgosai9060
    @yashgosai9060 Год назад

    🙏सर प्लीज हमे siemens 802d में stock removal cycle and contur cycle सिखाइए 🙏

  • @vikash_kumar2816
    @vikash_kumar2816 Год назад

    Aisaa laga ki apko thoda jaldii haii