Видео

hello, what kind of drive is compatible with the enclosure? I need to upgrade it. thx

Just use 90% rubbing alcohol for heavier stick on messes or 70% iso for a light job

50% chance of getting it right 100% chance of me getting it wrong I was wondering why the red bit would not fit the hook and wasn't adjustable many thanks 🙂

Many thanks for thorough review.

So, back when disk drives started there was a little loss due to internal meta data, but, these days you buy a disk and it's 1 or even close to 2TB shy of storage. That's a little more than meta data. Isn't it time to be honest? To understand and calculate the expected loss? I buy an 18TB and I get a 16TB... A 20TB and I get an 18TB. Shouldn't the 20TB be labelled 18TB?

I don't know why but I can locate it via GPS but not with the find button.

Still think this has best 90s look. Colours pop nicely.

i have used my 1090 for 15 yrs too....the weights are fine, but the handles, springs, ball bearings have been replaced few times. Time for a new set

Useless unless you are trying to heat a room the size of a closet...If you stand right next to it, you feel a very small amount of warmth. Don't go any further...

I have that Watch I just got it after yesterday

This stuff seems to work on very thin stick things, but then nail polish removal will do the same thing. Where it won't work, because I tried it, is to remove a layer of adhesive that holds a shower caddy to tile.

It works really well to heat your electric plug.

>standard state

The thing is these cases get broken easily

I got the same identical model from a friend of mine,said he cant get it to work and I am welcome to have it. It does not turn on. I assume the batteries have been in there for a long time. I replaced them with new ones hoping that would take care of the issue. Not so. Are there any other possible issues in why it doesnt turn on ? thank you !!

Can these make you eat plates if you’re doing chest press etc? Any risk with them falling off?

How long do you want to stay app there for a couple times a day? Sure, you scrub those wallows. It is usually double-sided because any amount of dirt or does will not stick. So I don't know what you're on. You're on crack. Most people buy crystal some damp and stuff with pretty sticky stuff on it. You know, we're not gonna go buy a f****** cannon, the loo. I've been kidding glue or a freakin. 3M tape bro like it doesn't work.Trust me I know that's stupid it's just marvelous that i'm in

De-Sta-Co clamps.

Didn't work for me

I had an xbox 360 controller (for pc i never had xbox) for the last 9 years. This controller is so clicky and noisy (face buttons like the A and dpad of course which is hilariously loud but at least it's more resposive than the older ones, with the 360 you usually pressed the wrong direction :D), I almost returned it because I saw a review that the PS5 controller is completly silent but on PCs xBox/microsoft is better because it recognizes the controller easily, and unfortunately I really don't find good 360 controllers anymore. I like the vibration in the triggers though and the grip, and it's a bit smaller, better for my hands. I will have to get used to the clicky buttons..

Thanx bro this video 📹 was alot of help 👍

Do not buy this!!!!!!! I got hacked!!!!!

I have this similar item pero ang problema ko wal akong data cable at para power supply. Hirap naghanap ng mga cables niya. Any can recommend shop for the parts... thanks

I trying to find this type mech but in reverse instead of pulling it would push or spread... arg. They make bar clamps you can reverse but i need a smaller mech

Is that one steel or aluminum

That shutter button on the Smart Battery Case will be adopted into the new shutter button located below the power button of the iPhone 16 Pro and iPhone 16 Pro Max.

What bolts|screws are you using to mount them I wanted to clamp them on aluminum sheet tool box and how is it holding up if you’re still using them

I have an iphone 15 pro max, and also have this camera which one would be better for photos ?

It runs me out of our house and great for our bathroom. Our house is insulated well and we live in Ohio.

I really like this heater , I it keeps a small space room. Warm.

What is the long black slit on the back of it? You glossed right over it, ha. Is it a speaker? Is it a fan of some sort? What is it?

Well I got not one but 2 of these heaters and the single pin would appear to be very fragile and has broken in both cases. Even though it did make a difference to the temperature of the room I would not recommend it as I am left with two broken heaters which I cannot use. I am actually hoping that I can get a refund as I have not had it that long

It cost's approximately 10 to 14 cents or 10p to 13p per hour. Thats £1.00 for 10 hours giving out very little heat. A third if a 1 bar electric fire basically

Thank you. Im gonna buy one for my s23 ultra. Thank you

Is the blue one still available? Does anyone know?

Verizon set it up I just did the pairing thing but if I decide to get a new phone I’ll have to unpair it from my old iPhone to connect it to my new one

You set the temperature of what? The temperature of the air thats flow out of the Heather or the temperature that you want on the room?

2:21 Not good for any large room but if you want heat up your hands from walking out of the cold it might work l purchased it and l am totally disappointed, not worth the money!

Mine arrived in a damaged box and the remote 2AAA batter switch would not work at all. I took it apart and cannot make it work at all. The seller will not replace the damaged switch and asks instead for more buyer info from the buyer about when he purchased it and where and will not replace a damaged cheap switch. That puts me off and the seller will not even acknowledge the complaint, let alone replace the non-working simple switch. Skip it... I say...

Thanks. I think some (many?) would like to know how long that usb cord is so they know if it will reach their power source

Does it provide cool air ?

I for what it's worth I have a much higher than average IQ. Having said this now to the free world, I don't seem to have enough intelligence to program this POS heater to stay running over a few minutes length of time. The control panel on mine with the grill at the bottom has the two + or - temperature buttons opposing each other above the digital display and they range from 0-32. Below the display there's the start button that once pressed lights up the number 30, press the button twice it changes it to a 60 second count down which it displays and after 60 seconds it shuts down. So naturally I set it on the 30 numeral press and hold a few seconds in the pathetic, desperate, hope that it is the secret to long term providing heat. It's the on off button why would it have any control over the operation time limit? Opposing this button is the actual supposed timer button that has a tiny clock imprinted on the button itself. Upon pressing this button starts the sequence of numbers from 00 -12, that's the range. I saw on your video numbers much higher than mine seems to have not sure why? The largest number that any of the four buttons will display is 32 from the two temperature buttons at the top of the display. We obviously have the same heater it appears. I have read the tiny manual a dozen times and seems quit self explanatory to any villiage idiot. I have implemented a plethora of various sequences of pushing the buttons, holding them at a pause to set and using every variety number available on each button with consideration that the temperature buttons may act as a thermostat and the negative temp button could shut the heater down prematurely. This has led me to the dark filled cosmos of you're the supreme loser of nothingness! Determined to provide my superior intellect with the outcome it deserves and demands. I've tried in vain using the four button selections in various orders and sequences, using the various numbers each button offers with special attention to the supposed 'timer' button. For the LOVE OF GOD AND ALL THINGS GOOD IN THIS POS WORLD I cannot master the programming to keep my heater blowing hot air over a few minutes. 'Please excuse my momentary outburst, I'm a beaten down self doubting intellectual for Christ sakes. 'There has been a few times between my ramblings of profanities and desperate, frantic, nonsensical, and random, pushing of the control buttons that I accidently programmed the 'secret code' to enable my heater to remain operating over a period of several hours. But all attempts of reverse engineering and repeating my previous steps don't seem to lead me to the same outcome.🤔 Much to my dismay, we are currently experiencing the coldest weather of the year. Apparently the tiny little Asian dudes those communist Chinese send over here inside these heaters whose existence the public may or may not be aware of, better known as sleeper cells change the programming to confuse me once I finally get it to blow hot air continually in an attempt to freeze me to death! There by avoiding any direct physical combat on their part! Well done China, well done!

I own it lost directions so I’m here I have a first floor bathroom that is always cold this does the trick in small spaces for quick heating as we have a broiler that takes longer since it’s a very large home, I like it because it doesn’t make my bill go up as it already expensive this time of year to heat. It’s negative 1 degrees outside and these little devices are helping me a lot 😊

What alternative do you recommend for large capacity storage that is good and fast to work from, other than SSD?

I just got one for 200 bucks , and the guy said people were low balling and not willing to pay 200

I’ve been getting commercials videos about this heater with two different story lines how they made it to different companies. I think it’s a scam and there’s a work and people are just giving bad reviews. Like I don’t understand things they’re scamming people. One of the store was college student that made this company and the other one was an old man that had hearing problems in their house and had a son that worked with NASA that does heating for NASA and made this product which one is which like are they telling lies to people, two different companies two different stories

For stud work you don’t get a visible line for the base unless you tilt the unit…..or am I missing something?

Do i need to be connected thru bluuetooth all the time? Or can i leta say not have bluetooth on. And when i cant find the phone i start bluetooth?

Why compare 350w of heat to 350w of light? A 350w LED light gives off little heat but lots of light. I don't know if this heater is any good, but 3xLight bulbs wouldn't give off 350w Watts of heat in the same way.

Is it true that this harddrive is noisy? If yes, what's the less nosier harddrive?