Видео

@@mudasr the bigger size tyres on the back was actually a rookie mistake. When I changed the tyres the first and only time so far, without realising that the profile is not a static number but actually dependent on the width, I asked for 35 all round. Regardless of how thin they may look, at least they visually matched before I replaced them. To answer your question, even with the slightly higher profile on the rear with the spacers in place, I've had no rubs with 5 people in the car going over humps.

Used the original ones otherwise they would go through the hub. The only caveat is that I have to carry two different unlocking lug nuts. I could get the two spare locking bolts cut but didn't bother.

With the genuine Spyder wheels on the correct axles without any spacers shouldn't rub on either side of the arch lining. I didn't have any issues with the spacers, let alone without. I know the e61s have air suspension on the rear wheels. Perhaps those have something to do. I had 4 people in the car with boot full of my son's stuff when dropping him of at his university. While hitting some bumps, I could feel the suspension kind of hitting rock bottom but there was still no rub on either side. That was with the spacers though.

I glad that it was of help. When I did mine, there was no information available for this combo.

@@aam77 My car is exactly the same as yours. I'm goin to powder coat my rims in anthracite. I'l post a pic when they are done 👍

5mm ones are not hub centric and I know people who have had wobbly front wheels on these rims.

@@aam77 I know. But like I said: depending on the shape of the inside of the rim, you could be lucky and have enough of the car's hub left for safely mounting the rims. My OPC rims on my Opel Insignia have a 'fase' (Sorry, I don't know the english word) of about 5mm, which means that they only "use" half of the 10mm of the car's hub. So mounting 5mm spacers would not be an option for me.

Take out one of the existing bolts, measure it, and add 15mm.

32 on the rear.

জামশেদ।

The recommended sizes are 245x35 on the front and 275x30 on the rear. If you go for the ones you mentioned, the profile may be the same due to their width but the width would still be narrow. May give that stretched look buy not sure how good it'd look on these wheels.

What size are the tires on the video. I saw rear end 275/35/19 but the front ? Thank you !

I'm not sure about the length but it'll be easy to work out. It'll be 15mm (Give or take 1-2mm) longer than the ones on the car.

They are one of the options for the M Sport E60. Mine came with them.

Fronts are 245 X 35 X 19

On the rear it should be 275 X 30 X 19 but I'm using 35.

@@aam77 and the front? 245 X 40 X 19 ? any rubs?

I have this mouse for about 6 years and I had no issue with it...

@@franciscovieira7059 Lucky you

Sorry it took me so long to respond. If the gap between the arch and tyre is similar, then it should be fine.

Just do a search on eBay with "bimecc" and the spacer size and your car's model. There are different colour combinations and also locking wheel bolts. You can get silver spacers with silver bolts or all black or mixed. As you can see I went for the silver spacers as the hub is silver and black bolts. They all do come with the extended bolts if that's what you meant by your second question.

She was actually practicing her brown belt kata. Poor girl got worried and asked me if this was going to be a problem uploading this video 😂

I'm sorry yours is playing up. Try on a different computer and see if it works. The driver is needed only to make changes to the mouse.

Thank you. Already tried, it does the same.

Here www.asus.com/uk/ROG-Republic-Of-Gamers/GX1000_Eagle_Eye_Mouse/HelpDesk_Download/

Can you say that again but this time in English?

lol learn it.

you just bad so stop crying and accept it.

RickDiesel718 it is a 1988 its just they change the front and back bumber covers the interior tells it all plus the btrake light on the hatch

MikeyMystery45 I know Laing are the manufacturer of the pump and other companies simply re-badge them like the graphics car market. That being said, Laing makes two types of D5 pumps. One with fixed speed and the other with a speed selectable switch. This particular one however is engineered by aquacomputer and they have implemented an software selectable variable speed via a USB cable that connects internally which I found neat and ingenious. As for your issue with the pump, I think that's just sheer luck. You're bound to get one bad apple sometimes, much like I did.

HansensUniverse my first one died but it wasn't the pump's fault but of the extra bits added by aquacomputer for software speed control and monitoring. Second one has been running for the last 3+ years.

Been having mine for 2 years, runs like new, i like the simplicity.

H-SC_Jake! Funny thing is that, I didn't report him from within the game but trying to do so outside of game was impossible because you can't search up his id. Some of the characters must be system characters.

JoeUseres this mouse I agree. Their motherboards, monitors and the other mouse that I use certainly doesn't.

All MSI Notebook have same problem, and many other Gamers Product. BTW Asus laptops still maintain better quality.

MrMethadrine I could but I have no space for anything apart from that. Live in a small flat.

Also check how the plane keeps on taking his aim towards it when he tried to shoot the guy under the tree.

Abdullah Al-Munim yeah, seems like the plane dragged the crosshair to itself

You know what I’m not a gamer but it’s vaguely interesting to watch.