Видео

I just loosened the bolts and I have enough space to wiggle it out of my way. If after loosening there’s still no room just take off since it’s a lot less sketchy then everyone makes it out to be.

@@Torres_Antonio did you loosen both bolts or just the bottom?

@ both, but its nothing crazy if you wanna take it off. I was just being lazy.

​@ Thanks. How's it holding up? Did you apply any RTV silicone to the three tabs?

@ unfortunately I lost the car after hurricane Milton. But during that time and before I never got any water and issues from the new seals. And that’s including rain, tropical storms hurricane helene and even Milton rain never got in the car. I also went back after the video and put the silicone on the tabs and it assuming that’s what made a big difference.

@@erichurt9884 I am still recovering from the Lexus being totaled lol

I’m always keeping an eye out so appreciate that.

Thanks for the compliment, and I would say the upgraded cut pile. It’s nothing excessive but enough extra material to where I thought it was worth it

And good luck with the holes for the 2nd row, those were a huge pain in the butt for me so just watch out.

Thank you for the kind words, luckily everything else is fine but I’m just in the hunt for another gx or v8 4Runner

@@Torres_Antonioonce you’ve the driven the v8 it’s hard to go back. My dream vehicle would be an FJ cruiser with the 4.7 and manual gearbox. The 4.0 isn’t bad by any means but the V8 is just magical.

Thatsll be dope, I’ve always wished the Tacoma came with v8 since everyone says it’s underpowered but that would be a crazy swap. I’ve looked at ford raptors gen 1 since its a v8 but holy smokes tho

Those never lose value so they’re still over 20k

Ahhh thanks for the tips. This mostly started because I missed the quad rail from the military. ( had a nostalgia hit) but couldn’t just get an upper with no lower. So just pieced it out. For now since I don’t train as much since work, hurricane and other things that come up. I figured I’ll do more affordable until I’ve caught up big time with my training and splurged it then.

@@stevouppers4822 appreciate it man

Yeah, thankfully since it and other parts I’m replacing still working I have them in “spare parts” box just in case anything new fails .

Florida man gone wild 🫡

Tomorrow, had to go out and make sure everything works and I didn’t mess anything up, but it’s flawless.

Literally states recording and battery took a crap so Saturday now lol

I actually got mine from eBay www.ebay.com/itm/387011902874?_nkw=For+Toyota+Prado+GX470+OEM+Quarter+%26+Door+Belt+Moulding+Black+SET+2003-2009&itmmeta=01J7F86GE8GJP1SD1WBRP2EGS4&hash=item5a1bb4fd9a:g:VREAAOSw5IJmRrwF&itmprp=enc%3AAQAJAAABMHoV3kP08IDx%2BKZ9MfhVJKkVi0UgIOyAi0dMFCL1lSNAlYZ0lw8qNdaohYxtjRHByZAYxeK3C%2BkRCUOS75Izj7H6%2Bvvp95GXwSc1tXI37Q42%2FP%2FL92SpZPEwhoR7LkpQdIWxKwLxBu2kvcKh6e0BDiZJG3NBbWmjTc7sBxtWqSBJS%2FljHrWtqA1wXtnhkuAgU4VFfxXrQJcRsyuVTmZolCrVedDnvWtgDVrwSS3rV9yj6CxvjNkeoE%2FHmnl5USmIdKS2L7uWoi%2BC8xEiTPwdaJIl7zeVW8AbZAuARREHTDaaWcTgM%2BGwSZAqVFyUrOc32pfMuL3kqnR6KWB%2FvSTUzg9NSo9SW44WswCgiIS5L0K9gPuHZGbxV658T%2BuAoYfg9hPYTqx7G8FfiRmfFWuf4D0%3D%7Ctkp%3ABFBMmIea6Ltk I’ve seen the process fluctuate super high and super low So I bought them at a mid point of 120 bit see some are higher now. We have like 4 major heavy rains and a tropical storm in FL and so far no leaks or any issues thankfully.

@@Torres_Antonio Thanks man. I also live in FL and I noticed water leaking in the GX. Hopefully I can get it changed out asap. Thanks again for the video and keep us updated.

@@gps996 Yeah like I said, thank,fully nothings came in yet. But I do want to check my sunroof drains and make a video on spots that usually leak and clean all mine out.

@@gps996 Literally took everything inside out and don't want to do that again for mold or anything cause by the elements.

So far no issues, and we’ve had a lot of rain and the tropical storm in my area and no water has made its way in. So I’m happy with the purchase.

www.ebay.com/itm/266072719940?chn=ps&_trkparms=ispr%3D1&amdata=enc%3A1KQ-JwHygRYiTT8rJu8UU6g33&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&mkscid=101&itemid=266072719940&targetid=2299003535955&device=m&mktype=pla&googleloc=9012149&poi=&campaignid=21214315381&mkgroupid=161363866036&rlsatarget=pla-2299003535955&abcId=9407526&merchantid=116344780&gad_source=1&gbraid=0AAAAAD_QDh_odpeSfdNuMQfVRyWGka1Bj&gclid=CjwKCAjw2dG1BhB4EiwA998cqH12d5C-UWnitSieN8hCzcceJ3Q3zAFx4Fg8_qS5DsdTSLG3dvpQXhoCvmwQAvD_BwE

The exact one I got I can’t see but that one is the same thing Mine just had the part number of 84247-58010 on the box but they all fit.

Had to look back to see what you meant, but yes, it’s stapled. But as you see how gross it was I ended up taking the plastic rails out and getting all of the left over out so it didn’t stink up the new carpet when I installed that. Luckily they just pop on and off the clips over the plastic water lines( or at least I believe there are water lines)

@@Torres_Antonio And once you get out all the bolts, is the carpet just held in by a bunch of clips? I'm planning on doing this same thing this weekend.

@@adamhlj yeah once you remove on the bolts from the seats and plastic trim, there’s a few spots that the carpet is hooked, like in the footwell area of the driver and passenger area. Then you would pull the plastic bracket that’s it’s stapled to and in a perfect world it would come off with and not rip. But just getting everything out is the part I went back and fourth catching small areas that were held on. I ended up replacing my carpet but to be honest if you have a pressure washer and enough sun or a vacuum to get the water out it’s worth doing that. All the carpet replacements have horrible figments so it’s a shame and not worth it in my opinion.

Thanks for sharing! I bought the car as is and it had to two mats. Unfortunately after cleaning I’m better off getting new ones regardless. But thanks for pointing that out. I just had tunnel vision taking them out in the FL heat 😂

@@Torres_Antoniodid you swap out whole interior to black?

@@rayflores8567 nope, I just did the carpet. I’m debating on getting actual black leather and reupholstering the seats Or just try to look out for the dark grey interior on eBay. But both are super expensive once it’s all said and done.

I have not turned the car on in a while, but I will this weekend and get back to you. When I did the same thing on my 4Runner it worked perfect but every car is different

Just out the car back together and drove it around and yes all the buttons work perfectly fine thankfully

Ahhh thanks, I did after I uploaded the video noticed there wasn’t a small hole for pin and welding on the A2, do the gunsmiths make their own or usually not? (I’m calling around spots near me)

@@Torres_Antonio yup they should be able to do it

Much obliged 🫡

Thank you for watching. I’ll try to be a little more clear and organized in the future.

It’s in the website for $349.99 I was going to get an aero lower and upgrade the trigger but after shipping it came out more then this.

I will say there’s A LOT of sales going on so realistically you can get a lot for way cheaper and I ordered mine a week ago like a fool.

luckily or unlucky for me the backing was separate, but there was a lot of misaligned things. Like for my other car it came out great but I kinda wish they took it off the sire since it was SO BAD.

Carpet quality was good but some holes did not line up and had some other fitment gripes. I'll have an update over this weekend to show it all so far.

My boy 🥰

Thanks, The dirt and smell really made me slow down, but it is one step at a time.

Sick. Keep it up.

@@Space_Octopus-z4m thanks mane

haha thanks man appreciate it.