Видео

Great video. Thank you.

I'm glad to see that you've decided to start making videos of the truck again. Not because I don't like the other content, but because I know this one means a lot to you. Your Dad is going to love it!

I NEVER comment on videos but I felt this deserves one. I installed their (AJE) front and rear kits on my 67 Mustang. You are not alone on any of your complaints. I had many of your same issues. AJE makes an outstanding product but their instructions were awful. The pictures are horrible and there should have been more alignment points referenced. If they would spend a little more time and effort on instructions and better pics/info on their website they would be covered up with business. In today's world customer service will make or break your business (in my opinion). Aje, if you see this, hire some young computer savvy employee that is passionate about making your product line stand out from the rest of your competitors. By updating your website with install instructions, with high quality pictures, write ups and videos you will be a cut above the rest.

Looking forward to seeing the process! And I'm digging the shirt.

Buyer Beware. The Hyper Tough Brand is not worth the money and Walmart does not honor the Hyper Tough Warranty. 😧

I need to do this also. I seen one cideo where the guy drilled and tapped aome holes to put grease zerks in allowing it to be greased. The seals on the end of the disconnect, allowes water in. Yhere may also be the option of greasing the seal similar to how youngeease them in snowmobiles, using greese in a syringe, and i jecting it into the seal.

I just bought an old buggy with CNC brake Master cylinder and clutch system similar to yours. Where did you a rebuild kit? Thank you for the video and any info you can relate.

Great video as always!

How long does the battery last

Nice review. Thanks. Looking at picking one up!

Very cool

I enjoyed the video. Its been a long time since I have seen one these things in the woods. When I was a kid there was a lot of people running them back then people would build them with a very short wheel base a heavy skid plate and individual cutting brakes. It was amazing what they would do over very rough terrain maybe not quite as good as a well built jeep but could hold their own . God bless.

Motor sounds like the chicoms made more cheap immersion blenders that Temu could sell for $2.15 so they turned them into "cutoff tool" and dumped them on Walmart.

Wanted to see tile

Where can I get one? Or at least the frame?

Cool buggy

Try to change the disc without the battery plugged into the tool. Safety first!

Great video! We absolutely love this park!! It is always changing and has something for everybody!

Awesome video!! Hate we missed this month!! Wally always puts on a show!! Glad everyone was ok!! Looks like a fun time!!🤘

Sweetgum tree burs (seed pods).

I miss my crown Vic i also had a 88 same thing but mine was white with burgundy interior. It was my first car when I got my license in 92 lol best car i ever had. I would love to get another same year or close to that year but that body style. It's my favorite before they come out with the round look. Still a nice car but the older ones have a better classier look to it 😂

Glad everyone made it out ok!! Hate we missed it and couldn’t be there for it!

Looks like it was fun while it lasted.change the tire will it run good enough to get back home?

Tough break .

Great job guys!

Who left the time and light there?

I'm glad you were able to use the master cylinder!

Wally is a great guy! Had a great day exploring the park.

Who knew picking weeds out of the cracks of concrete would wear a hole in my leather gloves...can't have nothing!

Test driving was fun Babe! You only scared me once on the dirt road😂

Do you run it with the 4ah battery? If so how does it perform?

Man that's a great video! I have a 93 Grand Cherokee Laredo that the transmissions fried and I know it's because of the 249 transfer case is bad, I'd like to do an upgrade.. you wouldn't happen to be in Texas would you?

I just picked this up today. I do a lot of small engine repairs, mainly lawn mowers. This is going to be handy for sure. Thanks for sharing.

Thnk u very much for this

Great video! Sounds like a really fun place to go wheeling. Gonna have to make the ride over there I believe.

Great video! Wally is definitely a great guy with a great park!!

My dad gave me his white 88 Ltd trailer special I just changed the heater core as my first fix on a car😁💪🏼. I’m loving that dash, mine is super cracked from the Cali sun lol. Glad to see some people actually like these cars still Bc I LOVE this car. I feel sorry for anyone who’s never rode in these, so smooth me and my brothers always fell asleep in the (sleep machine)😂great memories

I wanted 1/4” anvil ratchet but HY don’t offer it as of June 2024. Well I got at $15-$19 Harbor Frieght Central Pneumatic 1/4” air ratchet and swapped out the anvil drive portion of the head and now I have 1/4” and 3/8 Hyper Tough 12v ratchets. The HF air ratchets are now 3/8” drive. 🤓🔥

Are there any issues breaking bolts loose manually with one of these? Say, like brake caliper bracket bolts. I recently used my buddies Bauer cordless wrench from HF. It was great, it really sped up my brake job time/made it more enjoyable. But i found it to a little large with the battery hanging off the end. This tool looks like a happy medium

I watched this video because I am having a similar problem so I’ll diagnose my Jeep TJ similarly to how you diagnosed the no start no crank. Thank you for your knowledge.

The old one u took out is flat in both sodes but the new one is flat in one side & on the other side has two U shape indentation.That will fit or makes a difference? My 97 jeep wrangler 4.0 has one like the new one u have.So I bought a new one today with the same part # u got but is flat in both sides like the one u just throw away.Idk if that one gonna fit or need to have the 2 U shape cut. Please let me know,thank u!

Great and informative, I’ll be doing this myself soon

Been looking at one of these just because I’m tired of ratcheting stuff, I’m not a mechanic just work on my own stuff and seems like for occasional use these are pretty decent

Clutch plate is probably rusted to flywheel and or pressure plate

Thank Sir. I'm French and own a TJ 4.0L 1998. 50000 miles. I'm looking about videos showing how to replace the clutch. Mine has an issue : when the engine is "cold", I mean for the first 15 miles, when I release the clutch pedal, there are some vibrations as the engine is shaking so it's unpleasant when I start to move from a stop. There is no noise (even a little one) when I engage or release the clutch pedal being in Neutral, and the clutch itself seems to work well as it doesn't slide and it's strong even in 4 Low gears. No fluid leak also. After some miles, this issue decreases. All the 5 gears work well also and there is no noise on the roads or highways. So, with your experience, maybe you have an idea. My solution would be to replace the 2 discs clutch/bearing/....I mean the complete mecanism. To be continued.....🙂

Great video !! Very instructive. 👍

You can keep it. Torque test channel was able to break one and it could not come close the running the nut driving test at a decent speed. I'll stick with my DeWalts even if I pay three times the amount!

Torque Test Channel tested that model and I'll for sure pass....they were able to break it with a manual torque.

New sub here. I appreciate the groans and moans as you work, it reminds me of doing this job myself. LOL. Thanks for the video I learned something already today :)

No explanations needed, life happens.