Видео

@@nishatshaikh8012 you have to buy the software thru your 3Shape reseller. Good luck.

@@ignaciocardenas2098 you scan the lower, then the top and then do an impression scan for the centric tray.

@@smilehighclub6176 thank you. Love the video, really straight forward

@@zimscubasteve hi Steve, in regards to the cross section, I am looking to draw my line 2mm below the sulcus to allow room for the material during the final impression. Even though I draw the line, the software can add more material or it seems that I don’t have enough space and that’s why I use the soften tool to take away. I have been meaning to do a video on Ivotion, I’ll get going on that. Please subscribe and like my videos.

We Ivobase all our cast partials. That makes them a hybrid denture.

Thank you.

The scanner will only scan mucostatic tissue since no pressure is being applied. However, you can add pressure into your denture design for retention. For example, a common addition is the palatal seal.

It is a very amazing technology.😃👍🏻

I barely add clasps when I design partial digital dentures as long as there are undercuts on the lingual or posterior aspect of the teeth.

The manual alignment in the Trios software can be a bit off from time to time, but the manual alignment in the design software is very accurate. The accuracy would be fairly close. Scanning with an IOS is just a hair off from scanning with a desktop scanner. I am glad you are enjoying the videos.

much better

The only way to improve digital denture or any other type of digital design is by doing it. If the lab you work on have the software in a laptop and they can allow you to take it home, then that’s a good way to. If not, the only way is for you to buy yourself a fast gaming laptop and the software, but is not cheap.

@@smilehighclub6176 Thank you 🙏 for your time and suggestion. Unfortunately, the lab I am working doesn’t provide any facility and the software is very expensive as you mentioned. But I will try to buy one as soon as possible. Although, if nobody checks my design then I can’t improve it at all😢 Can you please tell me What kind gaming laptop would be the best for dental CAD design?

@@TK_Desang you need one with good memory and storage but most of all you need a good graphics card. Good luck.

@@smilehighclub6176 thank you 🙏

This is just a normal CLD order. Gingiva is Ivotion base for milled teeth, (I use the Ivoclar Mill, so for me I use the cam5 manufacturing process. For the Anatomy I choose artificial tooth, Ivotion multi and cam5. Then I bridge all the teeth. 👍🏻👍🏻

You use the centric tray. 👍🏻👍🏻

You can buy the Gnathometer CAD from your Ivoclar supplier

I adjust the teeth until I see a bit of red and more orange. Then I go to the sculpt anatomy stage and adjust the bite by grinding the bite at least three times pre denture. Or maybe the Dentist has taken a wrong bite registration. Hope that helps.

@@smilehighclub6176 Okay that helps a lot, I had mix responses to how they use the map and what colours mean. Do you find that when you morph to much on a tooth it feels like the antagonist tooth shifts down into that space ? or would that not be possible? I ask because when I play around and test it seems when morphing a certain area to yellow then morph even more it tends to make massive red or blue area🤔

The Gnathometer CAD can be bought from Ivoclar Vivadent. The software only makes the baseplates for them.

Ty

Same one Dr. Guttal.👍🏻

@@smilehighclub6176 Thank you. Plz may I ask you to share your esthetic plate stl. I saw that video. Excellent 👌

@@drsatyabodh if you’re talking about the 3D Biteplate, that gets designed in the software.

You’re welcome 😃

Hello Dr Sohaib, there are many different ways on recording a bite registration digitally. You may use the denture the patient is wearing, you can use a centric tray or you can use bite rims. I have more videos that outline all of the different ways of doing a bite registration. Please like and subscribe do more videos.👍🏻

I usually leave the base thickness to 2.5mm in order for the tray not to break in the mouth. In regards to impression gap, I leave it at 1mm to allow space for the impression material. I don’t use relief so I leave it at 0.

The same settings for all cases.

Thank you Sir for answering me 😁😁 Appreciate it much

Sorry one more question Sir, are we able to raise the bite, if the VD obtained from centric tray registration is way too low, for example around 30mm only. As if the VD is too low we can’t set the Gnathometer in.

@@han7797 yes you can change it in the gnathometer setup page under the occlusal plane tab. 👍🏻

Digital is definitely the way of the future, and is only getting easier.👍🏻

It’s a new feature on the latest software. You should always keep up with your software so you can enjoy the ease of use each upgrade brings.

You need to use a Centric Tray to be able to take a preliminary bite registration. Then you need to fabricate a 3D Biteplate in order to take final impressions and a proper bite registration at the correct VD. You rescan the 3D Biteplate and design your denture try in. Hope that was helpful.

Hi Tay, it really depends, I think I’m this case I fabricated a 3D Biteplate(gothic arc tracing) in order to take final impressions and do a bite registration. Then I go back to the software and design the dentures. Hope that helps. Please like and share my videos. Subscribe for more Digital Denture videos.

Glad to hear my videos are helping you Andy. Just a reminder, I do have a one on one training course if you are interested. Please make sure to give it a thumbs up and subscribe to channel if you haven’t already. Spread the word.👍🏻👍🏻👍🏻

@@smilehighclub6176 I didn’t realize you had a training option!! Where do I find the info!!

@@andyk3113 email me at office@caygeondentureclinic.ca and I’ll send you the info.👍🏻

Thanks CryptoReaper76.👍🏻 Don’t forget to subscribe for more digital denture content.

Hi Andy, yes I print try ins. I have a Nexdent 5100 printer and use their try in material in shade T1I, which is close to an A2 shade.

I don’t border mould. I just take a wash impression, but I let the patient mould the material to their muscle in the mouth by using the Dr. Abe technique on final impressions.

You can use existing dentures, or take a preliminary bite and then use bite rims, or pin tracer. With digital dentures, you can have a new set made in 3 appts(including a try in).

@@smilehighclub6176 thank you very much for your quick response!

@@ZACY1234 let me know if you have any more questions. Thanks for subscribing.👍🏻😃

Hi John, a voice over is definitely something I’ll incorporate this year. It’s hard when we are constantly busy.

Hello Miss Spaz, yes it can be done. Not sure what you mean by have them sent to you. You will have to go back to the dental provider to have them inserted.

It’s an immediate denture with little space for the anterior teeth.

Digital dentistry has made fabricating anything simple and extremely accurate including working with cast partials and implants. Have you tried it?

@@smilehighclub6176 I’m a lab tech. I know. The technology is not there yet.

Wait what? Move soft tissues? Nah man. I lost all my teeth at age 22 due to a severe illness that I wasn't expecting to survive from. And they never had to move any soft tissue around...

The point of this is to make sure I am able to establish a proper VD. This patient came in with extremely worn down denture teeth and had extremely over closed VD with the Md in protrusion. Therefore it needed to be corrected, and this was the best way for me to do so. My patient and I did not find this solution to be pointless as it allowed my patient to go back to a more natural VD, improve the appearance as well as the chewing abilities.

@@smilehighclub6176 you are still not in a correct vd. it is pointless with out a gotic arch involved

@@mistycmcana953 the 3D biteplate is a Gothic arch tracer. A well trained Denturist is able to provide any patient with a proper VD by using either wax rims or pin tracers or in case of digital dentures they can use existing dentures. In this case I chose this as the best option for my patient. Unfortunately, it is impossible for anyone to say if something works or not without having seen the patient before and after the dentures were made.

@@smilehighclub6176 brother , in our office we use jaw tracking motion , along side with a mounted sideby side conebeam with a modified gothic arch plate to track real motion of what you might be suggesting as your 3dbiteplate , and i asure you you are not in centric relation . do abit of study and you dont even have a propper impresion to have a well measured lower oclussal plane. im not going to discuss this with you but to me its pointless. awell trained denturist does not compare to a well trained gnatologist period.

@mistycmcana, you sound ignorant. He is designing a 3d cad bite that will be used with a gnathometer cad which will help Gothic arch tracing and CR record.

Hey Rafi, you can find me on LinkedIn under Caygeon Denture Clinic. 👍🏻

@@smilehighclub6176 thanks for responding ❤️❤️❤️❤️

The Trios 3 basic can be used as an IOS and to scan models and impressions. You can place your Trios 3 on a cart for portability(I use an Ergotron cart). The E4 is convenient though, you place your models or impressions or dentures to copy on the plate and the scanner does the rest(hands free). The faster the graphics card the better for the E4. It is an extra expense though. You would have to weigh the pros and cons and see what will work better for you. Let me know if you have any other questions. Have fun with digital, is a game changer.👍🏼

@@smilehighclub6176 I really appreciate your advice. although I work in a dental lab for many years work with 3shape for almost 6 years designing crowns, bridges and implants, I have no enough experience with digital dentures in the clinical and lab sides. I recently graduated from the denturist program. I took my board exam last month and waiting for my results. Now is the time for me to think about my future, I want to establish my work on a digital base, but it's hard for me to get all the necessary tools at the beginning. for start I want to do mobile dentures. I can't get the scanner and IOS both together. so here is the question, can I use the trios3 basic the wire one which is cheap, for IOS and take it out as portable and also use for scanning stone model? I really appreciate your help.

@@denturistm6832 yes you can.

@@smilehighclub6176 thank you very much

@@SaidMostafaMahmoud no problem. Enjoy the videos.

Yeah, this was a Timelapse of the setup. Of course this is now old technology, as all my dentures are now done digitally. 👍🏻😃