- Видео 6
- Просмотров 61 598
DIY CUSTOMS SA
Добавлен 25 фев 2021
Do it yourself mechanical, interior and exterior replacements/repairs from changing oil to major engine overhauls and conversions. Doing step by step guides for all work being done from volkswagen to Honda. Will also be doing videos on future builds with as much information possible.
IG: kyle_mk1gls
Email: diycustoms83@gmail.com
IG: kyle_mk1gls
Email: diycustoms83@gmail.com
Видео
how to change front brake pads honda civic ek9
Просмотров 2173 года назад
in todays video we will be replacing brake pads and cleaning the brake caliper on a Honda EK9. this process will take about 30 minutes to complete. tools required are as follows rachet 12 and 17 size sockets flat screw driver engine cleaner/brake cleaner music from youtube music
golf mk1 carburator rebuild/service (Keihin)
Просмотров 42 тыс.3 года назад
Today we are going to do a small rebuild/service of a Keihin golf 1 carburator. this video will be a step by step process on how to perform the rebuild yourself confidently using only common tools. carburetor serivce kit @ /- R270 (goldwagen) ensure the correct service kit is purchased for you carb carburetor cleaner @R70 (midas) these parts can be purchased at any accredited spare shop if you ...
how to change tie rod end, ball joint, hub and bearings on a citi golf
Просмотров 18 тыс.3 года назад
In todays video i will be explaining how to change suspension parts on a citi golf. i will be focusing on changing outer tie rods, ball joints, front wheel bearing and hub. LIKE, COMMENT and SUBSCRIBE if you enjoyed the video tools i used are below bearing press kit: www.adendorff.co.za/product/mac-afric-wheel-bearing-removal-tool-kit/?gclid=CjwKCAjw9MuCBhBUEiwAbDZ-7nQey7WHwwMjDrWgywaJ3Lhnf5CFO...
how to restore a golf mk1 black bumper
Просмотров 6533 года назад
restoring a golf 1 bumper using common tools. This is the only process that helped restore my bumper as i have already tried silicon, restoring liquids, etc. was fun creating this video as it is my first time attempting editing. please like share and subcribe
VW MK1 GLS (Introduction)
Просмотров 4833 года назад
just showing my pride and joy. showing the exterior of the car, explaining what the channel will be about like and subscribe. more content soon to follow IG: kyle.scholtz
U didnt clean the fuel jet
Cleant it off screen
Is there something more modern I can upgrade it to? Also an upgrade to get rid of the distributor? 1983 polo
Only way to upgrade is going fuel injection and coil packs if you want to get rid of the distributor
Very helpful,thanks for sharing
There's like a long screw that looks like a needle. Where does that go? And the float screw does the needle just sit inside is there no like rubber seat that goes into the screw first?
Clearly forgot to add the part on how to remove emulsion tubes
very good and clear video thanks a lot
Hi what i wanna know is ,in the chamber there are 2 jets for stage 1 and 2 , the holes differ one is small and one is bigger ,so which one goes where
Thanks mahn this is much appreciate bro
Thanks mahn this is much appreciate bro
Where you based buddy
My carburetor is not doing well after I realize that there is water in side fuel tank when I start the car fuel comes on top of the carburetor where the Is 2 pipes
Were did vacuum pipe on carb go to?
Hi guys can anyone help me .? I am running A vw caddy pickup 1600 carburator . It dies under acceleration like you going to stuck with petrol .. no power and dies .. it starts up again when u turn the key to start iv changed the petrol pump petrol separator new plugs new plug wires new coil new petrol filter blew the petrol pipes clean drained the petrol tank .. put on another carb i borrowd . Put in another battery ..another rotor and rotar cap put in a new mudulator ( blackbox ..) new harness cable plug .. i dont know what to do aymore. It still dies while under load .. looses power and stalls .. what can i still look for ? It starts fine i check for vacum leaks already checked the base plate .. its still ok .. thanks guys
Hi Brent. I know this is simple , but have you checked the engine side of things? Ie. Engine timing
Hi guys can anyone help me .? I am running A vw caddy pickup 1600 carburator . It dies under acceleration like you going to stuck with petrol .. no power and dies .. it starts up again when u turn the key to start iv changed the petrol pump petrol separator new plugs new plug wires new coil new petrol filter blew the petrol pipes clean drained the petrol tank .. put on another carb i borrowd . Put in another battery ..another rotor and rotar cap put in a new mudulator ( blackbox ..) new harness cable plug .. i dont know what to do aymore. It still dies while under load .. looses power and stalls .. what can i still look for ? It starts fine i check for vacum leaks already checked the base plate .. its still ok .. thanks guys
How is your timing?
This has really helped me today. My son's Mk1 got hit on the left side wheel and I've got the replace the carrier and hub assembly.
I did mine but I wasn't sure about the jets....stage one and 2
Hi Sipho. you can look at the size of the jets. they are labled on the jets itself. the larger jet is for stage 2
@@diycustomssa6699 dankie sir..I've noticed
yo buddy what engine is in this golf?
A 1.6 model EM
Thanks now I see where I was making a mistake
must subscribe. please dont stop uploading.
Thanks Boet for sharing this tutorial !!! Most appreciated 👍👍
Looks very similar to what's in my polo 86. Doesn't look too much more advanced than the two stroke engines I'm comfortable working on. I'll give it a go - thanks for giving me the confidence.
Thanks for the videos it helps
Hey Kyle can you tell me where you bought your bearing removal kit and the price please guy Will be much appreciated
Hi there. By a place called Adendorff. Cant remember the price but i know it was cheaper than having a bearing pressed at a repair shop
Dope video bro! Helped me fix my carb. Subbed
Dope vid bud... Do you know if this kit works on a pirate carb as well?
If its the exact replica like the goldwagen carbs then yes. But not the Dorco's etc
I notice that you did not replace the needle and seat that comes in the kit, any reason why not?
Hi. I re used the current ones as I did not have any issues with it
@@diycustomssa6699 Hi. Thank you for your repIy. I did my carb over the weekend and found that about half the components were not same spec or completely different e.g. jet sizes. I specifically asked for the 1300 golf and was sold the kit by Goldwagen.
@@petebuttons210 just to be 100% sure. I took my carb with so they could match the part number. Requested an 1800 carb kit which is 95% the same to the 1600 carb. I havent used a few of the parts in the kit, as i just wanted to service the main components that wear over time
Hi Man Nice vídeo Please share the specs of your carb Or, how to see my Carb specs so i can bauy the correct carb kit?
hi hw u man i need some help wit my carb
Very nice illustrations bra... but u forgot to replace the dust tray
Ce carburator as putea pune pe un golf 2 1.3 benzina?
Can anyone tell me how much kilometers a 1.3 carb with a fuel injection head should get out of a full tank?
Hi the video was really helpful so I opened up my carb the second stage looked a bit rusty but when I rev it by hand the second stage opens like a charm however when I rev it from the inside the second stage opens by a millimeter... so hence I thought it was my cable but then again the cable is fresh and whenever I adjust it with circlips/retainer clips it over revs gradually when ever at a stop or in neutral please help I've lost all hope
Hi there. Have someone have the pedal fully pushed down while you check at the carb if the butterfly is fully opening.
@@diycustomssa6699 thanks for reply.... the butterfly only opens when I rev by hand in the engine bay but when someone else is revving from inside it barley opens compared to when I rev it by hand....
Then if the pedal is not opening the butterfly fully then the cable should be the incorrect one. Have you put the 2 cables side by side to insure its the same length. Also taking note where all the stoppers are placed
@@diycustomssa6699 I have bought another cable put it side by side same length when I go to the local cable man he adjusts the cable with circlips or retainer clips but that only prompts over revving... still doesn't pull all the way and the feel of the paddle doesn't change
Adjusting the circlip just eliminates slack to make sure its properly positioned. Its hard to diagnose without seeing the issue. Did you check if the throttle arm is fully rotated when the peddle is flat. (See if the arm can be turned further when the peddle is flat)
Oh God can this shitty music just stop
Howzit, nice explanation, thankz
Hi, can you make a video of the vacuum hoses. I have a 1.6 Auto and I don't know where the vaccum pneumatic temp valve pipes go, your golf is similar?
Hi there. Could you perhaps send me a pic over insta so that i can have a look at which hoses you are talking about. Becuase i am only aware of the ones on the carburator, distributor and break booster
i cant find any of your social media platforms like Instagram or Facebook to contact you
Hi there. IG account is kyle_mk1gls
instagram.com/kyle_mk1gls/
Just a very very important note.... When you buy the carb kit, make sure that the air jet thread is the same. Just bought a kit, turned out my carb has imperial thread and the kits air jet screws are metric.... Once you open that packet, you can't return
Thanks for the tip. Will add it into the description
Most comprehensive and step by step video on this Carb. Much appreciated 👍👍
Glad you enjoyed it
Is it possible to get rid of rust (I think it's rust) on the brake disk?
Yes and no. If its on the mating surface where the pads grip to then the rust will be removed on its own. If its anywhere else on the disc then just leave it. Wont cause any issues
Bought the exact same kit but it came with 100 upper stage 1 and no upper stage 2 jet...also I have noticed my accelerator is much harder after switching to the diaphragm included in the kit...is this normal?
How do you restore the chrome part of the bumper
I've tried the cheap way which involves just spraying it with chrome can spray, but that didn't help much. Was a noticeable difference between the original and sprayed. If you want it properly done then have it chrome dipped (provided that the strips are not chipped and broken) this should bring it close to original state
@@diycustomssa6699thanks, how much and where can it the chrome dipped be done?
Last year i had it priced by a shop called chrome it (think its known as crc coatings now). Told them that i wanted all my trimmings coated. That was for all four bumper trimmings and well as window trims. Think the quote was about R1300 at the time. Which isn't that bad
@@diycustomssa6699 thank you for replying. 👏👏
Always happy to help
If only I had watched this today when I did my ks2 lol...ive put the jets wrong and been wondering why it's been going so badly...tomorrow I will redo it by following this video
Im glad that my video will be doing good for your rebuild. Let me know how it goes
Very Nice! .. Attention to detail... Love the music too. :)
Awsome video buddy thank you
How do I get into contact with you
Can message me on ig at kyle_mk1gls all lower caps.
@@diycustomssa6699 thanks for sharing How do I set the float lever?
Its a simple process but not easy to explain in words. U basically blow into the fuel inlet of the carb, move the float so that it is parallel with the base. If the it doesnt close off when the float is in that position, you then need to remove the adjuster and bend it abit until you get the proper level
@@diycustomssa6699 thanks I will do so.. Appreciate
How do I know which carburettor is for 1.8 golf?
Main differences would be jet sizes.
1.6 and 1.8 has the same size jets. Just the enrichment valve setting is different
Jet Sizes plus its all actually the same K2 Carbs especially on mk1 just the jet sizes that are bigger
Great tutorial...
Kwaai! Keep them coming. The videos, I mean
Dankie broe🙏🏼
Happy to help
Well Done, enjoyed the presentation, Maybe just a DIY TIP at the end showcasing yourself(face) would be better than perfect and an intro to what you tackling. Keep this going.... All Applause 👏 👋👋