Видео

Yess indeed. I definitely try to soeal about stuff based on my actual experience. You are exactly right, and I'm glad this video was helpful to you! 🙏

Yes you can make a key frame for it on the Y-axis of the transform node. I hope this makes sense. If you still have issues, maybe I can record myself do it and send it over. Let me know.

Thanks bro!! I did try to be myself and make the video a bit different than a typical rig video. I'm glad you enjoyed it 🙏

That's the key!! You're right. Thank you very much. FYI, we still use this little camera on every wedding. But in its strengths! Thanks for watching and supporting the channel

🤣🤣 this comment cracked me up. But I'm so happy my little story could be understood! This all stemmed and originated from a dream I had. So trying to bring it to life so others can experience my dream too was a challenge, but it allowed us to lean into every skill we have. Thanks for watching and your support.

I'm so happy to hear this helped you!! I've been very busy with work, but I have a whole slew of new content coming!! Thanks for supporting my channel and watching 🙏

You can! But you don't get the Zoom Clean Pre-amp. The dji would have a slight hiss. But you bypass it by borrowing the dji wireless features with the pre-amp power of the zoom and get a clean sound 😉

That's a good question! I'm not sure if know a way to do this! I believe there is a way to move the "anchor point" maybe and then rotate and control from that point. But I don't know if that's possible with the transform node specifically. I'm sorry!! I wish I could be more helpful! Have you been able to figure it out? If so, do share so we can all learn 🙏🙏

Occasionally, the size of the h6 may not be suitable for certain pockets, spaces, or locations. In such cases, a smaller body that can be plugged in or is completely wireless can be advantageous. Additionally, the receiver allows for remote monitoring of the audio, a feature not available when using only the shotgun for the h6. Furthermore, the h6 lacks the benefit of 32-bit float audio recording. I could elaborate further on the value this setup offers, but I hope this provides some insight into its versatility. 🙏

Now with the DJI to Sony adapter, you can connect directly to the digital input of the Sony shoe mount. This way, it transmits audio at 24bits 48kHz.

I wish dji would sponsor me now 😆jk. But I'm glad this helps!

Thanks! I'm glad this info is valuable to folks 🙏

Thanks!! I'm glad this video is still helping folks 🙏

Thanks! 🙏🙏

You're very welcome! Definitely a cool discovery. Glad I could share it with others! 🙌

That's cool! I never knew about the DVE node. I need to make a whole video about it. As much as I've been editing and doing vfx, 3d composites from blender into davinci...I never knew about it! Thanks man🙌

I'm glad to hear it was helpful! More content to come! I have some cool topics in the works 🤗

You're very welcome! I'm glad it made sense!

Glad to have you here! You're very welcome 🤗

You're very welcome my friend! I'm glad this was helpful to you!! 🙌 more to come 😁

I never knew about this node, man! Great comment and feedback! I need to tinker with this node a lot more and make a video about it. Cool stuff! Thanks! I learned something new. 🙌🙏

I don't create content based on trends. I create valuable content and cover topics that are very niche and actually help editors. Some of my videos get a lot of views, but not ones like this that are very targeted to individual editor challenges. Sometimes my videos get a lot of views later when the topic becomes trending. Either way, I appreciate you recognizing my work, and the views will come in time, bro. 🙏 Thanks for supporting my little channel here. 🤗

You're very welcome, my friend! That's the goal! I can't wait to cover every aspect of editing! I don't know everything, but I'm very happy to share anything and everything I do know. I'm so happy to hear this was helpful to you! More to come. ✊️🤗

I'm watching you from Ukraine, thanks for the video :)

@@cthutq-t9v you're very welcome! 🙂

Haha yep. Agreed! I've been still using it and it's a great lens. Quirky, but good!

Yep, I definitely plan to go more deep dive into it. This is just an introduction to the page 😁 I will definitely cover it in the next video. Stay tuned my friend 🙌

Thanks for watching and you're very welcome! I hope this video was helpful to you!

You're very welcome!

Yes you're right. That works too! the corner positioning is very useful for this particular case but can pose some challenges with more complex composites down the road! But since you're the second person to mention it, I might need to make a video on that along with when to use it and when not. I just needed to have a use case for teaching 3D Planes. Lol.

Yes, using corner points is easier in this example, but it may pose challenges for beginners due to their limited experience in handling potential issues. Moreover, corner positioning has limitations and is only applicable in certain situations, particularly on flat surfaces. But, using a 3D plane simplifies the process, eliminates potential complications, and simultaneously introduces an additional valuable tool to the user's skillset.

Your comment means so much! This was actually intended to be an example of what I would like to do with a bigger budget. It's a prototype, basically. It was meant to show what we are able to do, so now we are trying to pitch the idea to potential investors and producers to get funding. That's the only reason it's quietly released! Lol. We plan to have a much louder launch in the fall. But the fact you said this means so much. We put a lot of work into the universe, characters, and story. This isn't even half of it. It's a crazy world and I'm happy I got to bring this to life in the smallest package i could here. Thanks so much 🙏

Yes if you check out any of my talking head videos about camera gear after this video, many of those used this setup. I'll link one here so you can see how it sounds: ruclips.net/video/gaJPqMH8e3E/видео.htmlsi=3FH69zxEmV1GtXDB

Thanks for this!! This is actually the spec project. We created this to see if we can get funding for a much larger film. But we had to show people what we're made of! I'm sp happy to hear you enjoyed it!

Yes indeed! There's a lot of EUC in episode 2. Should definitely give that a watch! The main character is an euc cool rider with tech and powers, too!! Here's a direct link to it: ruclips.net/video/KXobbcg_-Ug/видео.htmlsi=Uzgo7NPLSmNPxQAP

Thanks sis! Yes we did! It was an incredibly challenging project and we learned so much while bringing this to life, but I am happy to hear you enjoyed it!

I really appreciate your feedback. I used to be insecure about my teaching style and compared myself to others. But now I'm trying to be myself and teach in a way that I would want to be taught. I'm glad you're enjoying the course and my teaching style!

Thanks for joining my course and watching 🙏

Thanks, bro! This was meant to just show the full scope of what I can do. I didn't intend for it to be a compelling story at all, but the fact you enjoyed it is great to know, and it encourages me to keep learning too and keep improving. Thanks, man. Means a lot from my fellow creator!

Yes bro, if you're using a MAC you would select "Metal" which is the equivalent. You got it bro! This is telling davinci to utilize your GPU now

Ooh no! You actually don't have to do that but depending on your video clips frame rate, codec, or file type, that may be the case. I've had issues tracking h.265 efficient compressed codec video files before but doing a "render in place" made it possible. So it's not always the case but I'm glad that this worked for you!!

This is actually just a snapshot of a much longer video. Sorry about the confusion bro! Here's a link to the full video: ruclips.net/video/ZeGNCxJk4Xg/видео.html

You're welcome as always bro!

Yeah, it's a basic camera, but it has a built-in gimbal. I think the hype is because it's small, shoots 4k 10bit quality, and has a built-in gimbal. People are excited because it could start a new trend in camera tech, with other brands coming out with cameras that have built-in gimbals. But you're right, it's a niche tool and can be amazing in some situations or just a basic camera in most.

🙏

Absolutely! I will be teaching the basics first, then I will share some cool secrets in the render page I've discovered. Then circle right back around to fusion and make it into it's own course.

Agreed!! 🙏

You're very welcome! May the courses continue!! 😁🙌

You're welcome as always! Can't wait to do the fun stuff. Almost done with the simple fusion 😁