Видео

This is a super time waster cowboy video who know's fuck all about boilers and trying to find out what the fault is. Probably not even gas safe registered.

Yep wish I saw this before I bought the two. My 430xh and petsafe fence don't play nice with each other. The 430 struggles to find the guide wire on the way home when near the petsafe fence and the petsafe collar is completely unreliable when the Husqvarna is on/out.

Did you ever manage to free this? How did you manage it? Have a similar issue with a Heatlink system

Wtf I learned literally nothing here f ashl

I got the C0 code on my indoor unit - cutting the breaker power and resetting it cleared it for now but think I'll need to do this job to be sure it's fixed now - thanks very much!

What was the problem in the end?

flame rectification fault

Too complicated

Do u measure the surface temperature of the floor or the air temperature in the room?

What was the point of this?

Pointless video

I only want to use manual. Nothing preset. How do I do this? Seems so complicated.

About to install my Pet safe unit but will be installing the cabling above ground along the physical fence, this would mean that the distance between the husqvarna ground loop and the fence wire should be about a metre apart. Anyone ideas if this would work better?

Cured my insomnia 😔

This is a thermister problem

I found when mine carried on at 70 without the burner going off and on like that, it was because the gas burner was adjusted too low. Turned it up slightly and it started working normally.

Hey, my heatmiser doesn’t match with the actual day. It’s very random

I have the daikin monobloc EDLQ011CA3V3 with 7H-01 problem on display and stoped working. I checked the filter I check the flow water sensor all it’s right but nothing. What is your advice?

Well I learnt fuck all from that.

Nice video as far as it goes, but is there a video explaining how to use the menu and modus? I don't know how to operate mine, and the control panel is not very intuitive.

Pointless video

The Stayfence.ie dog containment system works with robot mowers, came across this after having the same problems with the Petsafe dog containment.

Try Ambrogio robot mowers manufactured 2016 or later. The transmitter is digital and has 8 channels. If the default channel does not work, likely a different channel will work. Most robot mowers, including Ambrogio, have a very strong signal. Typically, the robot works but the fence signal is depleted. You might still detect the pet fence signal, but at a level close to the ground, but too low for the dog to feel the signal. With any robot mower, if the invisible dog fence wire is placed very close to the robot mower wire, the dog fence signal can couple into the robot mower wire. This is a worst case scenario because then the dog will feel the pet fence signal upon entering the yard (there is no nulling of the signal if it is being transmitted by the robot mower's wire loop). Ambrogio robots typically require one meter/3.3 feet or less between the two loops to prevent this coupling affect. Ambrogio robots can be purchased in the USA at this link: www.paradiserobotics.com/robots/ambrogio-robot-mower

Having the same issue with a wireless fence for stubborn dog and husqvarna automower. Was this ever resolved? After 5 calls with PetSafe today was the first time an agent said they won't work together. I mentioned and asked on all the other calls and they all said they work off of two different frequencies and there shouldn't be a problem it was user error.

Is there any way I can remove time setting up and 7 day and week program

Thanks, this fixed my problem!

Don't which this load of crap just videos lights on front of boiler dose not say one single word wants the point.?

Is there a way to set your temperature and leave it, everytime I set my stats and come back a day later the temperature has risen.

Do you have a business contact number. I am having issues with the same unit?

Anyone at this time found a solution yet?

I have the same issue. Have you ever resolved?

Is it the defrost sensor or 4way valve causing the unit not to defrost I wonder? I’ve manuals for that if you need them

I had a similar issue with the same boiler. The fan fault warning light was flashing after the heating and hot water completely died. So the plumber replaced the pcb board and now it's doing this intermittent switching on and off. Not as regular as this video. Switches itself off for a few mins then comes back on for a few mins. Very strange. The radiators are not even getting hot just slightly warm. Anyone know what's wrong with it??

Do you have to programme the two middle times? I have the air to heat underfloor heating, also on night time saving. Is it the temperature you set on the times, if it falls under that temperature the heat will come on? Also, if I have the heat running from say 8pm will it jump on the night time savings at 11 or continue the more expensive rate? I have one room that can be hard to heat

Hello youtuber :)

Hi Gerard. I have exactly the same daikin. after 6 months shut down (summer), the circulation Pump starts and stop after 20seconds. On my screen I can read "7H" error code. I have checked the Pump. its turning right. I have clean all fluids in my floor. its ok. I have clean the filter. I have tested the 3 speed of the circulation Pump. And i have finaly check this sensor wich is also mooving Well. But I still have this H7 problem. do you have any idea to help me ??? Many thanks from France. guillaume

Has anyone had timer issues I have same boiler, but had to turn boiler and gas off at weekend as we had new oven hob installed. Boiler works fine but for some reason now does not work when set to timed. Is there something that needs to be reset?

Mine war ignite any ideas what the problem is

Hi mate Where you connect the UH8 Heatmister to the boiler. I have a Viessmann vitodens 100 Thanks

Mine keeps turning the heat on don't know why this keeps happening

Any idea what caused this ?

Very helpful

Did u find a solution, the same thing is happening to my boiler keeps cutting out

back straight trash